SUPPORT HELP Loading...

Ultra Smart 4MP Bullet Camera 3.6mm Fixed Lens 30m IR LED Range


$199.00


Availability: In Stock
Ships Same Day
List Price: $399.00
SKU: WEC-IP29
Product #: 86067
Manufacturer:

Lens Type:
Remote Login Support:
Quantity

Ultra Smart 4MP Full HD WDR Network Vandal-proof IR Cylinder Camera - 3.6mm Lens, 30m IR Range, Ambarella S2LM DSP, IP67, POE

Features:

  • 1/3" 4 Megapixel Progressive Scan Omnivision OV4689 Image Sensor
  • Next Generation Ambarella S2Lm IP Camera Processor
  • 4MP@20fps Maximum Recording Resolution
  • 3.6mm Fixed Lens
  • True 120dB Wide Dynamic Range
  • H.264 & MJPEG Triple-Stream Encoding
  • Smart Detection (Tripwire, Intrusion, Scene Change, Face Detect and Heat map)
  • ONVIF Profile S Compliant
  • DC12V and PoE Power Capable
  • IP67 Ingress Protection Rating
  • Maximum IR LED Distance 98ft/30m

Specifications
Model WEC-IP29 IPC-HFW4421S/36
Image Sensor 1/3" 4 Megapixel Progressive Scan Omnivision OV4689 CMOS Image Sensor
DSP Ambarella S2Lm
Effective Pixels 2688 (H) x 1520 (V)
Scanning System Progressive
Electronic Shutter Speed Auto / Manual; 1/3(4) - 10,000s
Min. Illumination 0.01 Lux/F2.0 (color); 0 Lux/F2.0 (IR On)
S/N Ratio >50dB
Video Output N/A
Max IR LED Distance 98 ft. / 30m
S/N Ratio More than 50dB
Day/Night Auto(ICR) / Color / B/W
Backlight Compensation BLC / HLC / WDR (120dB)
White Balance Auto / Manual
Gain Control Auto / Manual
Noise Reduction 3DNR
Privacy Masking Up to 24 areas
Lens 3.6mm Fixed
Field of View Horizontal: 84°
Lens Type Fixed
Mount Type Board-in Type
Video
Compression H.264 / H.264H / H.264B / MJPEG
Image Resolution 4MP (2560 x 1440) / 3MP (2304 x 1296) / 1080p (1920 x 1080) / 1.3MP (1280 x 960) / 720p (1280 x 720) / D1 (704 x 480) / CIF (352 x 240)
Frame Rate Main Stream 4MP @ 20fps; 3MP / 1080p / 1.3MP / 720p @ 30fps
Extra Stream D1/CIF (1 ~ 25/30fps)
Third Stream 720p@8fps (WDR on); 720p@12fps (WDR off)
Bit Rate H.264: 32Kbps ~ 10Mbps
Audio
Compression N/A
Interface N/A
Network
Network Interface RJ-45 (10/100M)
Wi-Fi N/A
Protocol IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPoE, DDNS, FTP, IP filter, QoS, Bonjour
ONVIF Compliance ONVIF Profile S
Max. User Access 20 users
Auxiliary Interface
Local Storage N/A
RS485 N/A
Alarm N/A
General
Power Supply DC12V, PoE (802.3af)
Power Consumption < 5W
Working Environment -40°F ~ +140°F (-40°C ~ +60°C), < 90%RH
Protection Rating IP67
Dimensions 2.76"(70mm) x 6.50" (165mm)
Weight 1.0 lbs

Average Customer Rating:


1 Most useful customer reviews
Ken Williams
Feb 8, 2016
This customer purchased the item at our site.
Me and my husband recently moved in to a new neighborhood, which let me put correctly isn’t the nicest one. Anyway, I was adamant on the idea of purchasing a few security cameras to place around the house since we were staying here for some time. It was hard trying to find the perfect camera that was within my budget as well as not compromise on the service. After many websites and various searches I found this website and it took me quite some time to take my pick.

I was especially blown away by the high 4 MP, I haven’t seen a security cam this affordable and stacking up on the specs like this one. I fixed it above our front door towards the left corner and it could capture detail till our driveway which is a long way off. This camera is a great one for homeowners like me and it fits snugly in your budget. Not to mention its design is one of a kind.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}