GV-GF1911 GV-GF Fingerprint Reader works with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system

SKU: GV-GF1911
Geovision
SKU: GV-GF1911


Work with GV-AS / GV-EV Controller and GV-ASManager
Three types of access modes: card only, fingerprint only and card plus fingerprint
Fingerprint templates stored on the user card
Three types of communication interfaces: Wiegand 26, RS-485 and TCP/IP (LAN)

    • 20% less
    Market price:$876.00 save $176.00
  • $700.00
 
OR
Application Indoor use only
Communication Interface Wiegand 26, RS-485, TCP/IP (LAN)
Sensor Capacitive 
Sensing Area (H x W)18 x 13 mm / 0.71 x 0.51 in  
Operation ModeFingerprint Only, Card + Fingerprint, Card Only
Number of Fingerprints Stored 1,900 (for Fingerprint Only mode)
Supported CardISO14443A MIFARE DESFire, MIFARE Plus and MIFARE Classic, 13.56 MHz
OutputDC 24V, 2.5A
PowerDC 7.5V~12V, Max 250mA
Operating Temperature 0~50° C / 32~122° F
Humidity 10%~90%
Dimensions (H x W x D) 130 x 54 x 43 mm (5.12 x 2.13 x 1.69 in) 
Weight130 g (0.29 lb) 
Certification CE, FCC
Note:
1. For Card + Fingerprint Mode and Card Only Mode, it is required to purchase GeoVision's cards and tags to work with.
2. Data synchronization with GV-AS Controller and GV-ASManager through LAN is only supported
when the following controller firmware version and software version work together:
* GV-ASManager: V4.0 or later
* GV-AS100 / 110 / 120: V1.06 or later
* GV-AS400: V1.04 or later
* GV-AS210 / 810: V1.0 or later
* GV-AS410: V1.1 or later
3. All specifications are subject to change without prior notice.
Options
GV-AS ID Card & GV-AS ID Tag For Card + Fingerprint Mode, the GV-AS ID F Card or GV-AS ID F Tag is required. For Card Only Mode, both the GV-AS ID F Card / Tag and the GV-AS ID Card / Tag are supported.
GV-HUB V2 The GV-Hub V2 adds four RS-232/RS-485 serial ports through the computer's USB port, allowing connection between the fingerprint reader and the computer.
GV-COM V2 The GV-COM V2 can convert the standard RS-232 signal, through USB connector, to RS-485 signal, allowing connection between the fingerprint reader and the computer.
GV-NET/IO CardThe GV-NET/IO Card is a RS-485 / RS-232 interface converter that provides 4 inputs and 4 relay outputs. Using the GV-NET/IO Card, you can connect the fingerprint reader to the computer.
PC Service Package The package includes a USB cable for connecting the fingerprint reader to a computer and a reader mount to hold the reader for fingerprint enrollment.

GV-GF1911/1912 Specifications Sheet

Customers who bought this product also bought

Footer navigation