GV-AS ID Card is ideal for business environment where identity and access control is important for security reasons. GV-AS ID Key Fob, designed for easy carrying and key replacement, is ideal for residential application. GV-UHF Tag is ideal for parking lot management. GV-AS ID Card, GV-AS Key Fob, and GV-UHF Tag are compatible with the following devices:

- Manufacturer: Geovision
- Card Reader Type: Proximity EM Card Reader
- Frequency: 125 KHz
- Interface: Wiegand
- Card Compatibility: Wiegand 26-bit cards
- Maximum Reading Distance: Up to 100 meters (328.1 feet) with specific models
- Communication: RS-485 at 9600 bps
- LED Indicators: Red/Green/Blue LED indicators for visual feedback
- Beeper: Beeper with auto/user mode setup for audible feedback

GV‐PCR1251 is a USB card reader, supporting 125 kHz, designed to assist with GV-AS ID Card / Key Fob enrollment to GV‐ASManager. It reads the identification number of a detected GV-AS ID Card / Key Fob and emulates typing of the ID number to GV‐ASManager, or any other software desired. The user can conveniently establish user accounts on GV‐ASManager by placing cards / key fobs of 125 kHz onto the GV‐PCR1251 Enrollment Reader.

- Manufacturer: Geovision
- Card Reader Type: Advanced Access Control Card Reader
- Housing: Weather-proof and IP66-compliant
- Wiegand Interface: Supports Wiegand communication protocol
- RS-485 Output: Connectivity with up to 8 GV-DFR1352 units
- Frequency: 13.56 MHz
- ISO14443A Card Compatibility: MIFARE DESFire, MIFARE Plus, and MIFARE Classic
- GV-Proximity Cards with GID Support: Enhanced security measures
- UL 294 Compliant: Meets industry regulations
- Installation: Mounts on door frame for accessible card authentication
- Compatibility: Standard access control panels
- Dimensions: 0.8" Width x 0.8" Depth x 4.2" Height
- Power Supply: DC 7.5V~12V
- Microprocessor: 8-bit microprocessor for efficient operation

The GV-PCR310 is a USB card reader designed to assist with card enrollment to GV-ASManager. It reads and transfers the identification data of a detected card to GV-ASManager. The user can conveniently establish user accounts on GV-ASManager by inserting the cards in the GV-PCR310 Enrollment Reader.

GV‐PCR1352 is a USB card reader, supporting 13.56 MHz, designed to assist with GV-AS ID Card / Key Fob enrollment to GV‐ASManager. It reads the identification number of a detected GV-AS ID Card / Key Fob and emulates typing of the ID number to GV-ASManager, or any other software desired. The user can conveniently establish user accounts on GV‐ASManager by placing cards / key fobs of 13.56 MHz onto the GV‐PCR1352 Enrollment Reader.

GV-R1352

Card Reader

The GV-R1352 is a card reader designed to recognize identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-R1352 comes with a weather-sealed and IP66 compliant housing for outdoor use.

Key Features

• Weather-proof and IP66-compliant housing (for outdoor use)
• Wiegand interface supported
• RS-485 output: 9,600 bps, connect up to 8 GV-R1352 units
• 13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
• Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security
• UL 294 compliance

Note:

• RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
• UL 294 Attack Class Level 1 depends on other connected equipment.
• If you are using third-party cards or key fobs, the reader must be under UID mode.
• Specifications are subject to change without notice.

- Card reader with keypad: The device is equipped with both card reader and keypad functionality, enabling PIN code and identification card recognition.
- Wiegand and RS-485 outputs: The card reader supports both Wiegand and RS-485 communication protocols, providing flexibility in system integration.
- Weather-proof and IP66-compliant housing: The housing of the card reader is designed to withstand outdoor conditions and is compliant with IP66 standards for protection against dust and water.
- RS-485 output: The RS-485 output operates at a speed of 9,600 bps and allows connection with up to 8 GV-RK1352 units, offering scalability and expandability.
- Frequency: The card reader operates at a frequency of 13.56 MHz, specifically designed for ISO14443A card technologies, including MIFARE DESFire, MIFARE Plus, and MIFARE Classic.

Additional information:
- Default settings have all SW 1 settings ON.
- Beeper control can be internally or externally managed.
- Manufacturer SKU Number: 84-RK13520-0200
- Sales Part Number: 520-RK1352-000

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.

- Frequency: 13.56 MHz (ISO14443A)
- Wiegand Interface: 26/34 bits for seamless integration
- RS-485 Interface: Supports RS-485 and OSDP protocols
- Communication Speed: 9,600 bps
- Communication Distance: Up to 600 meters (1968.50 feet)
- Read Range: Maximum of 3 cm for accurate card detection
- Keypad: 12 keys (0-9, *, #) for PIN code input and interactions
- Vandal-Resistant Case: Constructed from zina alloy for durability
- Case Sensor Input: Supports connection of a case sensor
- Suitable for: High-security environments, banks, prisons, government facilities

- Manufacturer: Geovision
- Model: 84-AS21200-0010 (GV-AS2120)
- Interfaces: Wiegand, RS-485, TCP/IP
- Support: One-way control of up to 4 doors
- Two-way control: 2 doors using Wiegand only or 4 doors using Wiegand, RS-485, and network interfaces
- Compatible with 4 Wiegand card readers (26 to 64 bits)
- Support for up to 8 GV-Readers and GV-GF Fingerprint Readers through RS-485 and network connections
- Built-in: 8 digital inputs and 8 relay outputs
- Additional functionalities: Integration with security devices and systems
- Warranty: 3 years

- Model: 84-CR13200-0010 (GV-CR1320)
- Image Sensor: 2 MP progressive scan super low lux CMOS sensor
- Minimum Illumination: 0.02 lux
- Dual Streams: Supports H.264 and MJPEG formats for video streaming
- Resolution: Offers up to 15 fps at 1920 x 1080 resolution
- Day and Night Functionality: Removable IR-cut filter for seamless transition between day and night modes
- IR Illuminators: Built-in IR illuminators with an effective distance of up to 3 meters (9.84 feet)
- Ingress Protection: IP66 rating for dust and water resistance
- Power Supply: 12V DC, 2.5A or PoE+ (IEEE 802.3at) for power

- Manufacturer: GeoVision
- Camera and Access Controller combination
- Image Sensor: 2 MP progressive scan super low lux CMOS
- Resolution: 1920 x 1080 pixels
- Dual Streams: H.264 and MJPEG formats
- Minimum Illumination: 0.02 lux
- Day and Night Functionality: Removable IR-cut filter, built-in IR illuminators (up to 3 meters)
- Environmental Rating: IP66 (dustproof and water-resistant)
- Versatile installation: Suitable for indoor and outdoor use
- Advanced Features: Power over Ethernet (PoE) support

GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected to GV-EV48 using RS-485 connection and network connection. GV-EV48 can recognize identification cards and grant access to the authorized floors only.

- Display: 2.4" TFT color screen
  - Resolution: 320 x 240 pixels

- Face Recognition Capacity: Up to 2000 faces
  - Reliable and accurate identification of authorized individuals

- Verification Speed: Less than 0.5 seconds
  - Fast and efficient access control process

- Detection Range: Up to 80 cm (31.50 inches)
  - Stereo dual sensors (Lens and IR sensor) for wide detection range
  - Accommodates users of varying heights

- Voice and Sound Indication: 16-bit Hi-Fi voice and sound
  - Clear and audible prompts for user guidance
  - Enhances user experience and reassurance

- Power Options:
  - 12V DC, 2A power supply for standalone operation
  - Power over Ethernet (PoE+) using IEEE 802.3at standard
    - Flexible installation and integration options

Ajax KeyPad TouchScreen Jeweller black
Wireless keypad with touch screen to control an Ajax system
Supports authentication with smartphones, pass, tag, and codes 

- Input Voltage: 9 to 15 volts
- Antenna Gain: 7.71 dBi (circular polarization)
- Antenna Receiving: 50 ohm U.FL connector
- Wiegand Interface: Available in Wiegand 26 bit and 64 bit configurations
- Operating Frequency: RU9003 TW 922-928 MHz, RU9003 US 902-928 MHz, RU9003 EU 865-868 MHz
- Emission Power: 27.9 dBm
- Modulation Scheme: PR-ASK, ASK
- Current Draw: Less than 1A (maximum load)
- Protocol: EPC Gen2 (ISO 18000-6C)
- Receiving Sensitivity: -85 dBm

GV-AS4111 Kit is a cabinet containing a GV-AS4111, a power adapter board, a power supply and a casing for backup battery. The power supply provides power to GV-AS4111 and up to 8 output devices (12V, 0.5A per device).

- Access Control Panel
- One-way and two-way control of multiple doors
- Connectivity: Wiegand, RS-485, and network interfaces
- Card Reader Support: Compatible with Wiegand card readers
- User Management: Supports a large number of user cards
- Inputs: Built-in inputs for device integration
- Outputs: Relay outputs for device control
- Power Supply: Stable voltage output
- Processor: Robust processor for efficient operation
- Event Logging: Provides event logging and data storage
- Application: Suitable for a wide range of access control applications