AL300ULM Altronix Multi-Output Access Control Power Supply/Charger 12VDC or 24VDC @ 2.5 Amp

Altronix offers a complete line of Safety and Security, Fire, CCTV, Access, Nurse Call, and Automation products. AL300ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices. Input: The Input 115VAC / 60Hz, 3.5 amp. Input fuse rated @ 3.5 amp/250V. Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input. Output: 12VDC or 24VDC selectable outputs and 2.5 amp supply current. The Burglar Alarm Applications: 12VDC = 10VDC-13.2VDC; 24VDC = 20VDC-26.4VDC. The Five (5) PTC protected outputs, rated @ 2 amp. And the Output relay energizes when unit is triggered (form “C” contact rated 1 amp @ 28VDC). Filtered and electronically regulated output. Short circuit and thermal overload protection. Battery Backup: Built-in charger for sealed lead acid or gel type batteries. The Automatic switch over to stand-by battery when AC fails.The Maximum charge current 0.7 amp. Supervision: The AC fail supervision (form “C” contacts). - Notification trigger is selectable for 30 seconds (factory set) or 6 hours. Low battery supervision (form “C” contacts). Battery presence supervision (form “C” contacts). The Power fail supervision relay (form “C” contacts). Visual Indicators and AC input and DC output LED indicators (power supply board) and the Red LEDs indicate condition of power outputs (multi-output board). The Power and input trigger LEDs (multi-output board). Electrical. The operating temperature: 0º C to 49º C ambient and BTU/Hr.: - 12VDC: 15.35 BTU/Hr. - 24VDC: 30.71 BTU/Hr. The System AC input VA requirement: 402.5VA. Mechanical: Enclosure Dimensions (H x W x D approx.): 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm) - Accommodates up to two (2) 12VDC/7AH batteries. The Product weight (approx.): 7.6 lbs. (3.45 kg) and the Shipping weight (approx.): 8.6 lbs. (3.9 kg)A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency. New additions to our 2015 line include adaptive transmission products that facilitate network connectivity and system expansion, utilizing legacy, as well as state of the art system technology. Altronix offers OEM design and manufacturing services to create custom electronics for commercial and industrial applications and The power products and peripherals, feature the quality, reliability and unparalleled customer support that have been associated with Altronix for over 30 years.