SUPPORT HELP Loading...

3 MP 3.6mm Fixed Lens with Built in Mic IP Dome Camera


$276.00


Availability: In Stock
Ships Same Day
List Price: $325.00
SKU: WEC-AudioDA30A
Product #: 85029
Manufacturer:

Remote Login Support:
Quantity

3 Megapixel, Progressive Scan Aptina CMOS Sensor, 3.6mm Lens, Built in Mic, Vandal-Proof, Weather-Proof IP Armor Dome Camera

 

This dome surveillance camera from iMaxCamPro not only records video but also has a built-in microphone to capture audio. It has a 3.6mm fixed lens and can record up to 30 frames per second at a 1080p resolution. The infrared LEDs allow for viewing up to 98 feet in darkness. This security camera meets IP66 standards and is both vandal-proof and weatherproof. Footage can be viewed remotely via PC, Mac or mobile device.


  • 1/3” 3 Megapixel Progressive Scan Aptina CMOS Image Sensor
  • Supports H.264 & MJPEG Dual-stream encoding
  • High Performance Ambarella DSP
  • Max 20fps @ 3M(2048x1536), 25/30fps @ 1080P(1920×1080)
  • 3.6mm Fixed Lens
  • Built-in Microphone
  • DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC
  • 98 ft. / 30m Maximum IR LED Distance
  • IP66 Ingress Protection Rating
  • IK10 Vandal Resistance Rating
  • 12VDC / PoE (802.3af)
  • Access via Built in Web Server, iMaxCam Mobile App & PSS
  • ONVIF Profile S Compliant

WEC-AudioDA30A

3 Megapixel IP-Camera

General

Sensor Type

1/3” 3 Megapixel Progressive Scan Aptina CMOS Image Sensor

Digital Signal Processor

Ambarella

Effective Pixels

2048 (H) x 1536 (V)

Scanning System

Progressive

Electronic Shutter Speed

Auto / Manual 1/3(4) ~ 1/10,000s

Minimum Illumination

0.01 Lux / F1.2 (Color); 0.005 Lux / F1.2 (B&W); 0 Lux / F1.2 (IR on)

S/N Ratio

> 50dB

Video Output

N/A

Camera Features

Max IR LED Distance

98 ft. / 30m

Day / Night

Auto (ICR) / Color / B&W

Backlight Compensation

BLC / HLC / DWDR (Digital WDR)

White Balance

Auto

Gain Control

Auto / Manual

Noise Reduction

3DNR

Privacy Masking

Up to 4 areas

Lens

Focal Length

3.6mm Fixed Lens

Max Aperture

F1.8

Focus Control

Manual

Field of View

Horizontal: 72.5°

Lens Type

Fixed Lens

Mount Type

Board-in Type

Video

Compression

H.264 / MJPEG

Resolution

3M (2048 x 1536), 1080p (1920 x 1080), 720p (1280 x 720), D1 (704 x 480), CIF (352 x 240)

Frame Rate: Main Stream

3M (1 ~ 20fps); 1080p / 720p (1 - 30fps)

Frame Rate: Sub Stream

D1 / CIF (1 ~ 30fps)

Bit Rate

H264: 56 ~ 8192Kbps

Audio

Audio Interface

Built-in Microphone

Audio Compression

G.711a / G.711u / PCM

Network

Ethernet

RJ-45 (10/100m)

Wi-Fi

N/A

Protocol

IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, Bonjour

ONVIF Compliance

ONVIF Profile S

Max. User Access

20 users

Smart Phone

iPhone, iPad, Android, Windows Phone

Auxillary Interface

Memory Slot

N/A

RS485

N/A

Alarm

N/A

PIR Sensor Range

N/A

General

Power Requirements

DC12V, POE (802.3af)

Power Consumption

<4.5W

Operating Temperature

-20°C ~ +60°C

Operating Humidity

90% RH Max.

Ingress Protection

IP66

Vandal Resistance

IK10

Dimensions

108mm x 84mm

Weight

1.7 lb approx.

Shipping Weight

3 lbs approx.

Average Customer Rating:


1 Most useful customer reviews
Chris Harris
Apr 2, 2015
This customer purchased the item at our site.
This is the first time I have ever bought a security camera online and I thought it would be nice to talk about this one. I have much experience concerning security camera (just never purchased one online) and this one in particular caught my attention for how equipped it is. Firstly I would like to say how impressed I am with the built in mic, a very special feature that is rare. On top of that there is added protection like weather resistance, vandal proof as well as an armor. Not just that but it can shoot footage in complete darkness, at night, within a 98 feet range. To all those who want to purchase something worthy of their budget go for this camera for all the specifications brought together surely give you the best experience and make you proud.

I like to view all my video footage from my Mac as the smartphone does not give justice to that GOLD quality.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}