VJT-X10S BOSCH VIDEOJET X10 MPEG-4 RUGGED ENCODER, EXCL. PSU

The Bosch VideoJet X encoders belong to a family of industrial, high-performance, single, dual, or quad input CCTV video encoders. They are built into a rugged housing and constructed to withstand extreme environmental conditions. The VideoJet X encoders may be used at extreme temperatures, operating from -30 °C to +60 °C (-22 °F to +140 °F). These powerful and flexible devices represent the cutting edge of high performance video over IP for CCTV today. VideoJet X encoders are ideal for outdoor applications such as perimeter, border and fence control, as well as for industrial applications where they are tolerant of harsh environments. When used at remote locations you benefit from their wide 10 to 30 VDC power input range, so that they can be battery or solar powered. You also benefit from their SFP slot that allows a direct connection to a fiber interface module without the need for external fiber hardware. Their industrial-grade vibration resistance makes these encoders extremely suitable for use in mobile applications such as trains, busses or other vehicles. VideoJet X encoders offer unparalleled recording flexibility. Stream video across the network and store it using Network Video Recorders (NVRs). Record locally on CompactFlash, an external USB hard drive, or use an optional automotive-grade internal hard drive. Network-attached RAID iSCSI storage devices can also be used. The built-in iSCSI support enables the VideoJet X encoders to act as conventional DVRs while streaming high-performance live video across the network. The VideoJet X encoders use Dual Streaming to generate two independent IP video streams per channel if sufficient computational power is available. This allows viewing and recording at two different quality levels to save disk space and bandwidth. On alarm, they can send an e mail with JPEG images attached. You can record the streams independently on different media. Thus video can be recorded centrally on iSCSI drives managed by VRM Video Recording Manager and redundantly on the local media. If necessary, for example in case of a network failure VRM can fill up the gap in the central recording (ANR, Automatic Network Replenishment). The encoders feature a highly flexible recording scheduler, providing up to ten programmable recording profiles and allowing individually assigned camera profiles. With these profiles, you can accelerate the frame rate as well as increase the resolution on alarm, saving recording space during non-alarm periods. Firmware 4.0 enables the Bosch VideoJet X encoders to use H.264 Baseline Profile to encode the video signal. This allows reducing the required bit rate for a given quality setting, or increasing the quality when keeping the bit rate setting. When one or two inputs are used, the encoders deliver MPEG 4 video over IP at a full frame rate of 25 (PAL) or 30 (NTSC) images per second with up to 4CIF resolution on every channel. If four inputs are used the maximum frame rate is 12.5/15 images per second at 4CIF resolution and no Dual Streaming is possible. Because H.264 Baseline Profile does not support field encoding, interlaced video is not possible, thus resolution is limited to a maximum of 2CIF. H.264 encoding requires the double performance in respect to MPEG 4. Frame rate values must therefore be divided by two. The maximum frame rates listed in the tables below depend on the resolution, picture content and movement, and the number of inputs used. VJT X10S is a VideoJet X10 with 1 video input.