2018 Security Products 1067

2019 Security Products 16

VIP-GATEWAYX/24 NAPCO Turn-Key Kit VIP-GatewayX & G-Box


Availability: Out of Stock
List Price: $776.00
Product #: 24941


NAPCO Security Technologies, Inc. (NAPCO), incorporated on December 3, 1971, is a diversified manufacturer of security products, including access control systems, door-locking products, intrusion and fire alarm systems and video surveillance products. The Company's products are used for commercial, residential, institutional, industrial and governmental applications, and are sold worldwide principally to independent distributors, dealers and installers of security equipment. The Company's access control systems consist of a range of identification readers, including card readers, hand scanners; a control panel; a personal computer (PC)-based computer, and electronically activated door-locking devices. When an identification card or other identifying information is entered into the reader, the information is transmitted to the control panel/PC, which then validates the data and determines whether to grant access by electronically deactivating the door-locking device. VIP-GATEWAYX/24 NAPCO Turn-Key Kit VIP-GatewayX & G-Box. iSee Video VIP-Gateway is a module that converts any 4 analog CCTV cameras into internet ready IP cameras. It provides video images with a maximum of 640 x 480 resolution, viewable on virtually any computer at up to 5 FPS. The Gateway provides 4 input triggers that when activated, will prompt the transmission of video clips to the server. It also has a local video output that provides a sequenced video output of the 4 cameras. There are additional 4 inputs that allow the user to lock in one of the cameras to the local output. The Gateway provides (at no additional service charge) dynamic IP support through the Napco iSee Video DNS server - every 16 seconds the Gateway checks in with its DNS server to ensure that the DHCP IP address is always maintained. 4 video inputs, accepts any analog CCTV camera. 1 trigger input per camera channel for triggering transmission of video to VideoAlert.net server for archiving. Provides 4 ports for trigger in contact (1 x camera), supporting a wide range of trigger devices simultaneously. Programmable normally open (NO) or normally closed (NC). Provides 4 contacts for video lock (1 x camera) on the analog video output. Easily connects via UTP CAT5 cable (ethernet). Pixel based video motion detection with adjustable sensitivity and programmable 48 zone matrix masking capability per camera. scan time x 4 channels: 1 second. Three sensitivity levels. 10 seconds (adjustable to up to 3 minutes) of pre-alarm images per camera. Adjustable 24 bit color image resolution image size: 640x480, 320x240 and 160x120 setup up through active-X server application. Email send function upon external trigger or video motion detection, Dynamic IP support (without the need of 3rd party service) via iSeeVideo DDNS technology at no extra cost. NAPCO iSeeVideo proprietary firewall buster technology allows user to connect and view video behind even the tightest corporate firewall. Works with dynamic IP and IP-sharing allowing multiple Gateways to be connected to a router (no extra charge). Local video output latching - Video from cameras 1-4 may be latched to the video output by shorting input triggers 1b - 4b respectively. Transmission protocol: UDP. UDP Port used: Port 80 or any above 1000. Compatible with virtually all ISP connection types, including cable modem, DSL, PPPOe DSL, DSL/Router combos and satellite. Video out and video in 1 channel NTSC or PAL video output, can connect with PC and televisions, 4 channel. Video input programmable for NTSC or PAL, 1 Channel local video output, NTSC or PAL with switching: Selectable dwell time via web interface for local viewing or distribution. Unique RJ12 cable for power, simply connected via the input/output cable to the desired device (no jumpers).

There have been no reviews