SUPPORT HELP Loading...

Ultra Smart 4MP Vandal Dome Camera 2.8mm Fixed Lens 30m IR LED Range


$189.00


Availability: In Stock
Ships Same Day
List Price: $419.00
SKU: WEC-IP2728
Product #: 86069
Manufacturer: iMaxCamPro

Lens Type:
Remote Login Support:
Quantity

Ultra Smart 4MP Full HD True 120db WDR Network Vandal-proof IR Dome Camera - 2.8mm Lens, 30m IR Range, Ambarella S2LM DSP, MicroSD, IK10, IP67, PoE

Features:

  • 1/3" 4 Megapixel Progressive Scan Omnivision OV4689 Image Sensor
  • Next Generation Ambarella S2Lm IP Camera Processor
  • 4MP@20fps Maximum Recording Resolution
  • 2.8mm Fixed Lens
  • True 120dB Wide Dynamic Range
  • H.264 & MJPEG Triple-Stream Encoding
  • Smart Detection (Tripwire, Intrusion, Scene Change, Face Detect and Heat map)
  • ONVIF Profile S Compliant
  • DC12V and PoE Power Capable
  • IP67 Ingress Protection Rating
  • Maximum IR LED Distance 98 ft. / 30m

Specifications
Model WEC-IP2728
Image Sensor 1/3" 4 Megapixel Progressive Scan Omnivision OV4689 CMOS Image Sensor
DSP Ambarella S2Lm
Effective Pixels 2688 (H) x 1520 (V)
Scanning System Progressive
Electronic Shutter Speed Auto / Manual; 1/3(4) - 10,000s
Min. Illumination 0.01 Lux/F2.0 (color); 0 Lux/F2.0 (IR On)
S/N Ratio > 50dB
Video Output N/A
Max IR LED Distance 98 ft. / 30m
Day/Night Auto(ICR) / Color / B/W
Backlight Compensation BLC / HLC / WDR (120dB)
White Balance Auto / Manual
Gain Control Auto / Manual
Noise Reduction 3DNR
Privacy Masking Up to 24 areas
Lens 2.8mm Fixed
Field of View Horizontal: 106°
Lens Type Fixed
Mount Type Board-in Type
Video
Compression H.264 / H.264H / H.264B / MJPEG
Image Resolution 4MP (2560 x 1440) / 3MP (2304 x 1296) / 1080p (1920 x 1080) / 1.3MP (1280 x 960) / 720p (1280 x 720) / D1 (704 x 480) / CIF (352 x 240)
Frame Rate Main Stream 4MP @ 20fps; 3MP / 1080p / 1.3MP / 720p @ 30fps
Extra Stream D1/CIF (1 ~ 25/30fps)
Third Stream 720p@8fps (WDR on); 720p@12fps (WDR off)
Bit Rate H.264: 32Kbps ~ 10Mbps
Audio
Compression N/A
Interface N/A
Network
Network Interface RJ-45 (10/100M)
Wi-Fi N/A
Protocol IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPoE, DDNS, FTP, IP filter, QoS, Bonjour
ONVIF Compliance ONVIF Profile S
Max. User Access 20 users
Auxiliary Interface
Local Storage N/A
RS485 N/A
Alarm N/A
General
Power Supply DC12V, PoE (802.3af)
Power Consumption < 5W
Working Environment -40°F ~ +140°F (-40°C ~ +60°C), < 95%RH
Protection Rating IP67
Dimensions 4.33"(110mm) x 3.19" (81mm)
Weight 1.0 lbs

Average Customer Rating:


1 Most useful customer reviews
Ricky Thomas
May 13, 2015
This customer purchased the item at our site.
I must say this security camera is perfectly fitting for offices and professional workplaces. They fit perfectly in the surroundings without looking odd or too bulky. Blending in and barely visible I fixed these in the ceilings of my office departments. The video quality is flawless. It captures everything with crystal clear quality. There are 7 variations of the picture mode of this security camera; I like to stick to the largest and highest quality mode which is 4MP (2560 x 1440) pixels.

Also the smart detection feature came really handy after an unexpected small fire broke out in one of my offices. The heat map picked up the environment’s change and I was alerted me instantly. The field of view is perfect and covers a lot of surface area at 106°. Nearly all the office is covered but I installed just another one just in case. Very impressed by everything about this security camera and would definitely commend it to other fellow head offices in my area to install for top notch security.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}