FDABS-10 CVS Has 1 Coax or CAT-5 Input and 1 Coax & 1 CAT-5 Output. For Use With CH-1, CH-16, & C...
        • FDABS-10 CVS Has 1 Coax or CAT-5 Input and 1 Coax & 1 CAT-5 Output. For Use With CH-1, CH-16, & C...
        • FDABS-10 CVS Has 1 Coax or CAT-5 Input and 1 Coax & 1 CAT-5 Output. For Use With CH-1, CH-16, & C...

        FDABS-10 CVS Has 1 Coax or CAT-5 Input and 1 Coax & 1 CAT-5 Output. For Use With CH-1, CH-16, & CH-32 Chassis

        SKU: WECFDABS-10
        CVS
        SKU: WECFDABS-10
        The FDABS-10 is a Coax or UTP input, ground loop blocking, high performance amplifier board with 1 UTP and 1 Coax output that plugs into the DA-2160 system. The FDABS-10 has a gain adjust to compensate for signal level loss. The differential input amplifier is used to minimize or eliminate ground loop problems. The active UTP output can drive either active or passive recievers. This board is designed to tap off of an existing UTP system with a Coax feed for a DVR or monitor with BNC inputs. It has Inputs - Composite Video and it is Input Connectors – BNC with Input Level - 1vpp Into 75 Ohms and it has Input Impedance - 75 ohm +/-5% and it is Outputs - 2x Per Input it has Output Connector – BNC It has Output Impedance - 75 ohm +/-5% And it is Gain In/Out - Unity: +/-10% With Diff Gain - <1% It has Diff. Phase - <1° It is Frequency Response - 0-15mHz +/- .5dB &Power / Supply Hum - <63dB It is H Tilt - <1% It has V Tilt - <1% it has CCMR - Typ. 60dB @ 4Mhz it has High Freq. Boost - Typ. 0 - +10dB
          • 25% less
          Market price:$222.00 save $55.50
        • $166.50
         
        OR
        The FDABS-10 is a Coax or UTP input, ground loop blocking, high performance amplifier board with 1 UTP and 1 Coax output that plugs into the DA-2160 system. The FDABS-10 has a gain adjust to compensate for signal level loss. The differential input amplifier is used to minimize or eliminate ground loop problems. The active UTP output can drive either active or passive recievers. This board is designed to tap off of an existing UTP system with a Coax feed for a DVR or monitor with BNC inputs. It has Inputs - Composite Video and it is Input Connectors – BNC with Input Level - 1vpp Into 75 Ohms and it has Input Impedance - 75 ohm +/-5% and it is Outputs - 2x Per Input it has Output Connector – BNC It has Output Impedance - 75 ohm +/-5% And it is Gain In/Out - Unity: +/-10% With Diff Gain - <1% It has Diff. Phase - <1° It is Frequency Response - 0-15mHz +/- .5dB &Power / Supply Hum - <63dB It is H Tilt - <1% It has V Tilt - <1% it has CCMR - Typ. 60dB @ 4Mhz it has High Freq. Boost - Typ. 0 - +10dB It has DC Operation - 12 to 18VDC Isolated Source And it is DC Power Draw - Based On Card Installed In Unit It has Power Connector - 3.5mm Phono It is Size - 5.50”W, 6.25”D, 1.6”H It has Weight - 1.0lbs and it has Operating Temp Range - 0-40°C With Provided Power Supply. -35-80°C Without Provided Power Supply.it has CCMR - Typ. 60dB @ 4Mhz