DTK-MRJ45SCPRUV 4 pair 130v rj45 in/out modular jack
|DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling.Modular connectors were originally used in the Registration Interface system, mandated by the Federal Communications Commission(FCC) in 1976 in which they became known as registered jacks. The registered jack specifications define the wiring patterns of the jacks, not the physical dimensions or geometry of the connectors of either gender. Instead, these latter aspects are covered by ISO standard 8877, first used in ISDN systems. TIA/EIA-568 is a standard for data circuits wired on modular connectors. A modular connector is an electrical connector that was originally designed for use in telephone wiring, but has since been used for many other purposes. Many applications that originally used a bulkier, more expensive connector have converted to modular connectors. Probably the most well known applications of modular connectors are for telephone jacks and for Ethernet jacks, both of which are nearly always modular connectors.