DITEK Corp.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling.Modular connectors were originally used in the Registration Interface system, mandated by the Federal Communications Commission(FCC) in 1976 in which they became known as registered jacks. The registered jack specifications define the wiring patterns of the jacks, not the physical dimensions or geometry of the connectors of either gender. Instead, these latter aspects are covered by ISO standard 8877, first used in ISDN systems. TIA/EIA-568 is a standard for data circuits wired on modular connectors. A modular connector is an electrical connector that was originally designed for use in telephone wiring, but has since been used for many other purposes. Many applications that originally used a bulkier, more expensive connector have converted to modular connectors. Probably the most well known applications of modular connectors are for telephone jacks and for Ethernet jacks, both of which are nearly always modular connectors.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security Electrical or IT industries a plus. One year of lead generation or inside sales experience required. Compensation based on experience. Extensive benefit program. Most phone systems use this type of cable. The common color is gray and made of polyvinyl chloride (PVC). Most manufactures have standardized on this color for this material. Another standardized color is white, usually associated with plenum cable. Plenum cable is cable used inplenum spaces of buildings. The plenum is the space used for air circulation for heating and air conditioning systems, by providing a location for ductwork. Space between the structural ceiling and the dropped ceiling or under a raised floor is typically considered plenum.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security, Electrical or IT industries a plus. One year of lead generation or inside sales experience required. Compensation based on experience. Extensive benefit program. A modular connector is an electrical connector that was originally designed for use in telephone wiring, but has since been used for many other purposes. Many applications that originally used a bulkier, more expensive connector have converted to modular connectors. Probably the most well known applications of modular connectors are for telephone jacks and for Ethernet jacks, both of which are nearly always modular connectors. A modular connector is an electrical connector that was originally designed for use in telephone wiring, but has since been used for many other purposes. Many applications that originally used a bulkier, more expensive connector have converted to modular connectors..

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security, Electrical or IT industries a plus. One year of lead generation or inside sales experience required. Compensation based on experience. Extensive benefit program. DITEK’s MRJ series protects vital data lines and computerized systems from surge-induced damage. Convenient RJ connections protect one, two or four voice/data/signal pairs, depending on model. MRJ series protectors are easily installed at a building’s incoming entry, at the equipment being protected, or any point between them. The MRJ series is perfect to protect incoming CO lines, station lines, low voltage data, and building-to-building runs.Features of this products are RJ45 connectors available.Protect 4 (RJ45) pairs.Multi-stage, hybrid design provides the best possible protection.Current-limiting circuitry minimizes risk to connected equipment.Suitable for use on 14 V circuits.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling.DITEK’s Low Voltage Line Protector series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package.Ditek's inline coaxial surge protectors are designed for applications where a dedicated ground is impossible or impractical. Since there is no external ground, the iBNC protects video feeds without introducing ground loops. Fast and easy installation and solid performance make these a favorite of professional CCTV systems integrators. Fixed or Coaxitron PTX camera surge protector. Features of this products are Small footprint makes installation easy.Recommended for applications where AC power is already protected and ground is unavailable.Fixed cameras. This products related with Ditek corporation company. This is a very good company.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling.DITEK’s Low Voltage Line Protector series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package.Ditek's inline coaxial surge protectors are designed for applications where a dedicated ground is impossible or impractical. Since there is no external ground, the iBNC protects video feeds without introducing ground loops. Fast and easy installation and solid performance make these a favorite of professional CCTV systems integrators. Fixed or Coaxitron PTX camera surge protector. Features of this products are Small footprint makes installation easy.Recommended for applications where AC power is already protected and ground is unavailable.Fixed cameras. This products related with Ditek corporation company. This is a very good company.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. A surge arrester is a device to protect electrical equipment from over-voltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), this class of device is used to protect equipment in power transmission and distribution systems. (For consumer equipment protection, different products calledsurge protectors are used .DITEK’s HW series of surge protectors are engineered and manufactured to the exacting standards of the life safety industry. More fire alarm panels worldwide are protected by the 120 HW than any other protector. The HW series has a 15 year reputation for performance, reliability and quality. These units are the only real choice, for sensitive electronics on a dedicated circuit.Features of this products are Diagnostic LED. Small footprint. Parallel connection. Three voltage configurations. Benefits are Indicates ground presence, unit function and power on. Can be used in wide array of applications.Maintains power to system. Works on all single phase applications.This prodsucts related with Ditek corp. company. This is a very good company.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling.The MRJ45C5E provides protection of high speed data, up to cate without degrading the data signal. Variants are available to protect 5V network data or 105V DSL lines. The MRJ45C5E is ideal for network data, IP video, VoIP, and point of sale applications. A version with a ground plug is suitable for finished office environments. RJ45 high-speed data/video surge protector.Features of this products are Protects all four pairs RJ45 connection with external grounding screw Multi-stage, SAD technology, hybrid design provides the best possible protection Conforms to EIA/TIA standards for data transmission Automatically resets to protect against multiple surges.This products related with Ditek corporation company. This is a very good company.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. DITEK’s VSPA video surge protectors combine state-of-the-art circuit technology with F Type connectors to protect a variety of video devices. Whether the need is for video protection on CATV feeds, Digital Satellite Systems, or Broadband Cable, DITEK’s VSP products provide optimum protection without signal loss. A surge protector (or surge suppressor) is an appliance/device designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltagesupplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. This article primarily discusses specifications and components relevant to the type of protector that diverts (shorts) a voltage spike to ground; however, there is some coverage of other methods. The terms surge protection device (SPD), or transient voltage surge suppressor (TVSS), are used to describe electrical devices typically installed in power distribution panels, process control systems, communications systems, and other heavy-duty industrial systems, for the purpose of protecting against electrical surges and spikes, including those caused by lightning. Scaled-down versions of these devices are sometimes installed in residential service entrance electrical panels, to protect equipment in a household from similar hazards

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling.DITEK’s Low Voltage Line Protector series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package. Applications include protection of 4-20mA current loops, alarm panel NAC, SLC and IDC loops, and burglar alarm panels. Models are available to protect 1, 2, 4 or 8 pairs. LVLAWG models can handle 14-10 AWG wiring connections. Features of this products are Series connection, parallel function adds no resistance to loop circuits.Protect 1 pair to match your configuration needs.Seven voltage levels available to protect all types of voice/data/loop applications.SCP model provides automatically resetting fusing and sneak current protection.SAD-Based. This products related with Ditek corporation company. This is a very good company,

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. A surge arrester is a device to protect electrical equipment from over-voltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), this class of device is used to protect equipment in power transmission and distribution systems. (For consumer equipment protection, different products calledsurge protectors are used.) The energy criterion for various insulation material can be compared by impulse ratio, the surge arrester should have a low impulse ratio, so that a surge incident on the surge arrester may be bypassed, to the ground instead of passing through the apparatus.To protect a unit of equipment from transients occurring on an attached conductor, a surge arrester is connected to the conductor just before it enters the equipment. The surge arrester is also connected to ground and functions by routing energy from an over-voltage transient to ground if one occurs, while isolating the conductor from ground at normal operating voltages. This is usually achieved through use of a varistor, which has substantially different resistances at different voltages. The energy in a handled transient is substantially less than that of a lightning discharge; however it is still of sufficient quantity to cause equipment damage and often requires protection.

DITEK's TPV series of video surge protectors address a key vulnerability of Twisted Pair Video CCTV systems - the video wire. Lacking even the minimal amount of protection that a shielded coaxial line has, Twisted Pair Video systems are vulnerable to surges entering on the unshielded video wiring, potentially damaging cameras, converters, or head end equipment. Twisted pair cabling is a type of wiring in which two conductors of a single circuit are twisted together for the purposes of canceling outelectromagnetic interference (EMI) from external sources; for instance, electromagnetic radiation from unshielded twisted pair (UTP) cables, and crosstalk between neighboring pairs. It was invented by Alexander Graham Bell. In balanced pair operation, the two wires carry equal and opposite signals and the destination detects the difference between the two. This is known as differential mode transmission. Noise sources introduce signals into the wires by coupling of electric or magnetic fields and tend to couple to both wires equally. The noise thus produces a common-mode signal which is canceled at the receiver when the difference signal is taken.This method starts to fail when the noise source is close to the signal wires; the closer wire will couple with the noise more strongly and the common-mode rejection of the receiver will fail to eliminate it. This problem is especially apparent in telecommunication cables where pairs in the same cable lie next to each other for many miles. One pair can induce crosstalk in another and it is additive along the length of the cable. Twisting the pairs counters this effect as on each half twist the wire nearest to the noise-source is exchanged.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security Electrical or IT industries a plus .DTK3LVLP series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package. Applications include protection of 4-20mA current loops, alarm panel NAC, SLC and IDC loops, and burglar alarm panels. Available to protect 3 pairs. LVLP models can handle 22-16 AWG wiring connections. Hardwired low voltage surge protector. Features of this products are Series connection, parallel function adds no resistance to loop circuits.Protect 2 pairs to match your configuration needs.Seven voltage levels available to protect all types of voice/data/loop applications.SCP model provides automatically resetting fusing and sneak current protectionSpecificationsPerformance.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security Electrical or IT industries a plus.DTK2LVLAWG series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package. Applications include protection of 4-20mA current loops, alarm panel NAC, SLC and IDC loops, and burglar alarm panels. Available to protect 2 pair. LVLAWG models can handle 14-10 AWG wiring connections.Hardwired low voltage surge protector. Features of this products are • Series connection, parallel function adds no resistance to loop circuits.Protect 1, 2, 4 or 8 pairs to match your configuration needs.Seven voltage levels available to protect all types of voice/data/loop applications.SCP model provides automatically resetting fusing and sneak current protectionSpecificationsPerformance.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security Electrical or IT industries a plus .The Wiegand interface is a de facto wiring standard which arose from the popularity of Wiegand effect card readers in the 1980s. It is commonly used to connect a card swipe mechanism to the rest of an electronic entry system. The sensor in such a system is often a Wiegand wire , based on the Wiegand effect, discovered by John R. Wiegand. A Wiegand-compatible reader is normally connected to a Wiegand-compatible security panel. The Wiegand interface uses three wires, one of which is a common ground and two of which are data transmission wires usually called DATA0 and DATA1, alternately labeled D0 and D1or Data Low and Data High.

Arrester is a device to protect electrical equipment from over-voltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), this class of device is used to protect equipment in power transmission and distribution systems. (For consumer equipment protection, different products calledsurge protectors are used.) The energy criterion for various insulation material can be compared by impulse ratio, the surge arrester should have a low impulse ratio, so that a surge incident on the surge arrester may be bypassed, to the ground instead of passing through the apparatus.To protect a unit of equipment from transients occurring on an attached conductor, a surge arrester is connected to the conductor just before it enters the equipment. The surge arrester is also connected to ground and functions by routing energy from an over-voltage transient to ground if one occurs, while isolating the conductor from ground at normal operating voltages. This is usually achieved through use of a varistor, which has substantially different resistances at different voltages. Without very thick insulation, which is generally cost prohibitive, most conductors running more than a minimal distance, say greater than about 50 feet, will experience lightning-induced transients at some time during use. Because the transient is usually initiated at some point between the two ends of the conductor, most applications install a surge arrester just before the conductor lands in each piece of equipment to be protected. Each conductor must be protected, as each will have its own transient induced, and each SPD must provide a pathway to earth to safely divert the transient away from the protected component.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security, Electrical or IT industries a plus. One year of lead generation or inside sales experience required. Compensation based on experience. Extensive benefit program. DTK2LVLAWG series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package. Applications include protection of 4-20mA current loops, alarm panel NAC, SLC and IDC loops, and burglar alarm panels. Available to protect 2 pair. LVLAWG models can handle14-10 AWG wiring connections. Hardwired low voltage surge protector. Features of this products are Series connection, parallel function adds no resistance to loop circuits.Protect 1, 2, 4 or 8 pairs to match your configuration needs.Seven voltage levels available to protect all types of voice/data/loop applications.SCP model provides automatically resetting fusing and sneak current protectionSpecificationsPerformance.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security, Electrical or IT industries a plus. One year of lead generation or inside sales experience required. Compensation based on experience. Extensive benefit program.The 2LVLPF is available; however, its recommended use is limited to control panels and systems that use less than 500mA of current. Its recommended replacement is the DTK-2MHLP series. Please note that the installation instructions for this entry reference the DTK-2LVLP series. Call DITEK for details. Alarm panel surge protection.The DTK-2LVLPF is specifically designed to protect 24V SLC loops into the alarm panel, preventing induced surges from damaging sensitive (and expensive) control boards. Its low-current fusing provides extra protection for sensitive fire alarm panels.Features of this products are Series connection, parallel function adds no resistance to loop circuits.Protects 1 or 2 pairs of SLC loops.Recommended for 'legacy' Fire Alarm Control Panels. Ten year limited warranty.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control, and Voice/Data/Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. Our advanced technical expertise and state-of-the art ISO 9001:2000 certified manufacturing facility guarantees our customers leading edge technologies at competitive pricing with off-the-shelf availability through our global distribution partnerships. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security, Electrical or IT industries a plus. One year of lead generation or inside sales experience required. Compensation based on experience. Extensive benefit program. DTK2LVLAWG series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package. Applications include protection of 4-20mA current loops, alarm panel NAC, SLC and IDC loops, and burglar alarm panels. Available to protect 2 pair. LVLAWG models can handle14-10 AWG wiring connections. Hardwired low voltage surge protector. Features of this products are Series connection, parallel function adds no resistance to loop circuits.Protect 1, 2, 4 or 8 pairs to match your configuration needs.Seven voltage levels available to protect all types of voice/data/loop applications.SCP model provides automatically resetting fusing and sneak current protectionSpecificationsPerformance.

DITEK Corporation has been the industry leader in the design and manufacturing of surge protection devices and systems for more than 20 years. DITEK provides total surge solutions for low voltage CCTV, Fire and Intrusion, Access Control and Voice Data Signal applications, including VOIP and POE. We also offer a complete line of hardwired suppressors and arrestors for main and distribution panels, as well as point of use equipment. DITEK is looking for a Sales Development Specialist to make 50+ outbound calls per day to generate and qualify leads through warm and cold calling. Position is based in Largo, FL. Excellent interpersonal, written and spoken communication skills required. Prior experience in the Security, Electrical or IT industries a plus. One year of lead generation or inside sales experience required. Compensation based on experience. Extensive benefit program. Ditek's 2MHLP series of signal, data and loop circuit surge protectors provide robust protection in a compact package. Designed for ease of installation, with convenient field-replaceable modules, the 2MHLP protects two circuit pairs per module. Applications include protection of 4-20mA current loops, alarm panel NAC, SLC and IDC loops and burglar alarm panels. Modular surge protector for current loops, fire panels, alarm panels. Available from 5V-75V with or without hard wire mounting base. Features of this products are Multi-stage, SAD technology, hybrid design provides the best possible protection.Hard-wire mounting base.Field replaceable, hot swappable, modular edge card connection design.Seven voltage levels available to protect all types of voice/data applications.Two pairs protected per module; when used with mounting base (DTK-MB) modules can be ganged to protect up to ten pairs with a common ground performance.