May be tied in with a Louroe Microphone (or Speaker/Microphone) for communications with the Louroe Base Station
Fits in a standard single gang electrical box for flush or surface mounting
Interface with DG-12/25 series alarming base stations
DCS is a call station with a push button for flush or surface mounting. Contains a 3 kHz oscillator to trigger the Louroe ALA and DG Series Base Stations. Base station can be activated either by pushing the call button (containing a 3 kHz oscillator) or by sound that exceeds the threshold level set at the base station.
The Model DCS is a duress call station with a panic
button, and a 3 kHz oscillator mounted to the back
of a single gang stainless steel faceplate. Unit fits
into a standard single gang electrical box (not
supplied) for flush or surface mounting. When
panic button is pressed, an audio signal activates
the Louroe Base Station and identifies the zone.
Compatible only with Louroe Models DG-12/25
series alarming base stations. Model DCS can be
wired directly to the base station, or tied in with a
Louroe Microphone or Speaker/Microphone for
providing one-way listen or two-way talk/listen with
the base station.
4.5″ L x 2.75″ W