B+B SMARTWORX

Accessory for SmartFlex Routers

Features

• DIN Clip - plastic SmartFlex/Motion/Swarm

Specification Description

Plastic DIN holder for Plastic versions of routers SmartFlex/Motion/Swarm

Specifications:

Applications

Accessory for SmartFlex Routers

Features

• DIN Clip - plastic SmartFlex/Motion/Swarm

Specification Description

Plastic DIN holder for Plastic versions of routers SmartFlex/Motion/Swarm

Specifications:

Applications

Accessory for SmartFlex Routers

Features

• Ant WiFi 2.4 & 5.8 GHz

Specification Description

Antenna WiFi Stick FLAT, 2,4/5,8 GHz, 5 dBi, SMA-RP connector (Recommended for SmartFlex/SmartMotion/SmartSwarm with WiFi)

Specifications:

Applications

Accessory for SmartFlex Routers

Features

• DIN Clip - metal v2 and SmartFlex/Motion/Swarm

Specification Description

Metal DIN holder for Metal versions of routers v2 and SmartFlex/Motion/Swarm

Specifications:

Specifications:

Applications

Accessory for SmartFlex Routers

Features

• PS, SFle/SMot/SSwo, 12V/1A

Specification Description

Power supply with MOLEX connector for SmartFlex/Motion/Swarm (2 pins) - 12V/1A, EU/US/UK/AUS plugs

Specifications:

Specifications:

CUI Inc. SMI Family Plug Wall Adapters are Ac-Dc power supplies with interchangeable blades. The series are each designed to meet the latest Level VI efficiency standards set to go into effect February 2016. This standard aims to significantly lower th e amount of power consumed when the end application is not in use or is no longer connected to the system.

Designed for global use, CUI’s SMI adapters include plug options for North America, Europe, the United Kingdom, Australia, and China. These high efficiency power supply adapters are a continuation of CUI’s initiative to provide customers with global solutions utilizing the latest in green power technology.

Features

• Up To 18 W Continuous Power
• DOE Level VI, CEC, ErP Stage 2
• No Load Power Consumption < 0.1 W
• Universal Input Voltage Range
• Interchangeable Ac Blades For Global Use
• Over Voltage, Over Current, And Short Circuit Protections
• UL/cUL, RCM, CCC, And PSE ty Approvals

Specifications:

Applications

Accessory for SmartFlex Routers

Features

• Ant LTE, Terminal

Specification Description

Antenna LTE 698MHz to 960MHz, 1575.42MHz 1710MHz to 2700MHz Typical 70%+ Efficiency and 3dBi+ Peak Gain Dipole Swivel Terminal Antenna Hinged 90 termination with SMA(M) Connector (Recommended for SmartFlex/SmartMotion/SmartSwarm, LR77 v2, LR77 v2 Libr atu

Specifications:

Applications

Accessory for SmartFlex Routers

Features

• PS, SFle/SMot/SSwo, 48V/1.35A

Specification Description

Power supply with MOLEX connector for SmartFlex/Motion/Swarm with PoE PSE (2 pins) - 48V/1.35A

Specifications:

Specifications:

Features

• Interchangeable SFP modules allow for multiple fiber mode/type conversion options (single-mode, multimode, long haul, short haul, etc.)
• Extended operating temperatures
• Multiple mounting options (Desktop, DIN Rail, IE-PowerTray/18-AC [for high-density installations])
• Compact size conserves space
• AC or DC powering options
• Ideal for use with IMC Networks’ SFPs
• SFP Modules are hot-swappable; no need to power-down chassis when upgrading or troubleshooting a single module
• Diagnostic LEDs

Specifications:

Connect RS-485 Devices to your USB Port 
Perfect for Field Service Applications 
Small - Fits easily into any laptop bag 
USB Port Powered 
USB 2.0 (12 Mbps) Compatible 
RS-485 Data rates up to 921.6 Kbps 
Removable Terminal Block for Easy Wiring 
High Retention USB Connector 
Supports Windows 98, ME, 2000, XP, Vista, Win7 32 & 64 bit

Features

• Connect RS-485 Devices to your USB Port
• Perfect for Field Service Applications
• Small - Fits easily into any laptop bag
• USB Port Powered
• USB 2.0 (12 Mbps) Compatible
• RS-485 Data rates up to 921.6 Kbps
• Removable Terminal Block for Easy Wiring
• High Retention USB Connector
• Supports Windows 98, ME, 2000, XP, Vista, Win7 32 & 64 bit

Specifications:

Measuring less than 3.5 inches deep and 2 inches wide, the MiniMc is the industry’s smallest media converter with both data connections on the same side of the unit, and at a fraction of the cost of other alternatives. Plug-and-play operation with a variety of model types and powering options make the MiniMc series easy and convenient to use.

Applications

Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Media conversion’s greatest benefits are flexibility and cost savings.

Features

• One 100 Mbps FDX fiber port or 1 SFP fiber port
• One 10/100 Base-TX twisted pair port
• AutoCross automatic selection between crossover or straight-through connection
• Status LEDs
• 18 connections in the 1.5U high IE-PowerTray/18 Chassis

Specifications:

Specifications:

Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Measuring less than 3.5 inches deep and 2 inches wide, the MiniMc-Gigabit and Giga-MiniMc are one of the industry’s smallest media converters with both data connections on the same side of the unit. An optional fiber SFP port gives network operators the flexibility to upgrade network equipment to different fiber interfaces. Designed and manufactured in the USA, the MiniMc Series extends 10 and 100 Mbps twisted pair network segments up to 80 km over fiber.

Applications

Both a media and data rate converter, the MiniMc features 10/100 Auto Negotiation on the copper port while the fiber port operates at 100 Mbps full duplex. MiniMc 10/100 switching fiber converters are ideal for all premises, FTTD, LAN-to-LAN or LAN-to-MAN fiber networking applications.

Features

• 10/100 Mbps switching MiniMc connects 10 or 100 Mbps copper to 100 Mbps fiber (fixed or SFP version)
• 6-year comprehensive warranty on converter and power adapter
• User-friendly 10/100 Mbps Auto Negotiation technology on MiniMcs
• AutoCross feature for twisted pair connection on all converters
• MiniMcs include country-specific, high-reliability AC power adapters and can also be powered with an optional USB-power cable
• Available with multimode fiber or single-mode fiber, single-strand fiber, CWDM fiber and SFP connectors
• Compact, metal enclosures with external AC power adapters
• IE-PowerTray/18-AC chassis supports up to 18 modules in the 1.5U high, rack-mountable enclosure

Specifications:

Designed to fit many applications, the ESW105 and ESW108 series are plug-and-play industrial Ethernet Switches with an ultra compact IP30 DIN rail case, 6 way mountable panel brackets, LEDs for Power, (Link / Speed / Activity for each port), 12 to 36 V DC and 10 to 24V AC power inputs with removable terminal blocks. These switches are perfect for any applications that require special protection from hash environments.

Features

• Ultra compact design - less than 1 inch wide
• UL/cUL Class I/Division 2 Groups A,B,C, and D
• Designed to meet Level 3 (Heavy) industrial environments - EN61000-6-2 Certifications
• Shock, vibration, free fall tested
• LC single and multimode fiber ports
• 100M, full/half duplex, MDI/MDI-X (Auto-negotiate)
• Supports IEEE 802.3, 802.3u, and 802.3x standards
• IP30 rated DIN rail case with 6 different panel mount options
• Dual power inputs, 12 to 36 V DC and 10 to 24 V AC
• 2K MAC addresses

Specifications:

Description

Must be a reseller to purchase this product.

Features

• LED’s Power & Loop Detect
• IEEE 802.1p QoS
• Strict mode
• Dual Power Inputs
• Modbus/TCP & SNMP
• 802.3az
• Energy Efficient
• Ethernet
• Jumbo Frames support: 9
• 216 bytes
• IP30 Metal Housing design
• Radiated/Conducted noise protection
• UL508/C1D2/ATEX Zone

Specifications:

Model HESP4DR meets IEEE 1000-4-5: 1995 and IEEE C62.41-1991 recognized standards for premium surge protectors. It protects against lightning strikes, power surges, and other types of voltage disturbances with three stages of protection for each supported line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). Five RS-232 signals on terminal blocks are supported with a clamping voltage of 6.8 Volts.

Features

• Three stages of protection on every data line: 1) Gas discharge tube, 2) Series resistor, 3) Transient voltage suppressor
• Protected signal ground connection
• Rugged terminal block connections
• Dedicated chassis ground lug
• Wide operating Temperature
• NEMA TS2

Specifications:

The 4WSD9TB and 4WSD9R Universal Converter provides RS-232 to RS-422/RS-485 conversion using either port-power or an external power supply. The 4WSD9TB has a Terminal Block RS-485 connector, and the 4WSD9R has a DB9 Female connector.

Features

• Extend RS-232 data signals up to 1.2 km (4,000 ft.)
•  
• Change RS-232 TD and RD to RS-485 signals
•  
• Automatic Send Data Control
•  
• Baud rates up to 115.2 kbps
•  
• RS-232 Port Power or External 12 V DC Power Jack
•  
• Dipswitch selectable RS-422 or RS-485

Specifications: