960H Color 1/3 700TVL, Low Illumination Lens 3.6mm/F2.0 IR Night Vision Bullet Camera


$60.00


Availability: In Stock
Ships Same Day
List Price: $189.00
SKU: WECCBIF960C37C10GM
Product #: 85854
Manufacturer:
UPC: 881314695317

Cables:
Power Supply:
Remote Login Support:
Quantity

This surveillance camera will bring you a high resolution color 700TVL crystal clear image during the day then automatically go into black and white/infrared mode in order to allow you to identify objects in total darkness. This security camera is a favorite for both indoor and outdoor installations where lighting is dull and quality is needed.

Product Features

  • 1/3” High Resolution SONY SuperHAD CCD II Sensor
  • High resolution of 700 TV Lines & 0.001 Lux
  • o Gain Control, allowing for high definition picture in low Lux condition
  • Auto Electronic Shutter can reach speeds up to 1/100,000s

 

SPECIFICATIONS

 
Model WECCBIF960C37C10GM
Camera  
Pick up Element 1/3” SONY SuperHAD CCD II
Effective Picture Element (HxV) 976(H) x 494 (V)
Horizontal Resolution 700TV Line
Minimum Illumination 0.001 Lux / F1.2
S/N Ratio More then 52db
Scanning System 2:1 Interface
Synchronous System Internal, Negative sync.
Auto Electronic Shutter NTSC: 1/60s ~ 1/100,000s
Gama Characteristic 0.45
IR Distance 20 Meters (with ¢5x24pcs IR LED)
IR Status Under 10Lux by CDS (with IR-CUT)
IR Power ON CDS Auto Control
Video Output 1Vpp, 75Ω
Auto Gain Control Auto
Power / Current DC 12V (+/- 10%) 500mA
Lens 3.6mm
mension (mm) 168(W) X 73.5(H) X 65(D)
Weight (g) 500g
Storage Temperature -30 ~ +60°C RH95% MAX
Operating Temperature -10 ~ + 50°C RH95% MAX

Average Customer Rating:


1 Most useful customer reviews
Lisa Resnick
Feb 4, 2016
This customer purchased the item at our site.
Being the owner of a retail store that is open day and night, it was very important for me to have a high resolution, security camera installation as the stores security and success relied on it. I was very pleased to come across this camera as it was within my budget range.

But after some research I discovered that this security camera is way more than just a cheap hack, with multiple functionality features such as infra-red modes, fast shutter speeds (that allow for a clear picture in near darkness), high-resolution footage, super sensors etc. Having fitted almost half a dozen of these 960H color cameras on both interior and exterior areas of my store, I was amazed at how much more aware and in-control I was of my surroundings and staff, visitors etc.

Would definitely recommend this as an affordable, neat solution to all home/business owners looking for a security solution.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}