4 OUT Relay Lock Module 3A Fuse

        4 OUT Relay Lock Module 3A Fuse

        SKU: C4-BOXED1
        LIFESAFETY POWER
        SKU: C4-BOXED1

        1.  Share

        4 or 8 Output, Relay Based Lock Control Module Fused (C4, C8) or Class 2 Power Limited (C4P, C8P)

        The FlexPower C4, C8 lock controller modules add either 4 or 8 lock control outputs to a FlexPower power supply and are typically supplied as part of a system or purchased as an expansion piece to an existing system.

        Each module provides either 4 or 8 access control inputs capable of voltage or dry contact activation. Each module provides either 4 or 8 lock outputs, each one programmable for fail-safe, fail-secure, dry contact, and fire alarm override for egress lock control. Each lock output is also programmable to either of the two voltages available when used in a FlexPower dual voltage power system. Each output is supervised for voltage and/or blown fuse with the fault reported to the host power supply.

        Agency Listings/Standards
        Product listed for use in LifeSafety Power equipment

        USA: UL 294, UL 603, UL 864, UL 1076, UL 1481, UL 2044, UL 2572, FCC Part 15, Subpart B CSFM Approved Canada: ULC S318, ULC S319, ULC S527, CSA C22.2#107.1, CSA 22.2 #60950

        Electrical Ratings

        ParameterRating
        Lock Outputs4 / 8
        Access Control Inputs4 / 8
        Input Voltage12 and/or 24 VDC
        Input Current20 Amps
        Output Voltage (Jumper Select)12/24 VDC
        Output Current C4/C8Fused at 3A per output
        Output Current C4P/C8PClass II at 2.5A per output
        Fire Alarm InterfacePer Output
        Supports follow on modulesYes

        C4/C8 C4P/C8P

        Features

        Flexibility

        1. Multiple outputs for direct lock control and additional accessory power distribution modules
        2. Colored coded by function configuration jumpers for ease of programming
        3. Configurable fail-safe, fail-secure, and dry contact modes of operation
        4. Fire Alarm Interface (FAI) when used with an FPO power supply
        5. Fault detection and reporting to host power supply
        6. FlexConnect® Dual Buss Architecture

        Output Protection

        1. C4/C8 ATM style fuse: 3A/per output
        2. C4P/C8P Solid state circuit breaker: 2.5A/per output

        Visual Indicators

        1. DC voltage per output (green LED)
        2. Fault (yellow LED)

        Mechanical

        1. Multiple modules can be daisy chained to add additional outputs
        2. Snap-in style mounting standoffs with fast-on connect cables for easy field installation
          • 13% less
          Market price:$76.42 save $10.00
        • $66.42
         
        OR

        1.  Share

        4 or 8 Output, Relay Based Lock Control Module Fused (C4, C8) or Class 2 Power Limited (C4P, C8P)

        The FlexPower C4, C8 lock controller modules add either 4 or 8 lock control outputs to a FlexPower power supply and are typically supplied as part of a system or purchased as an expansion piece to an existing system.

        Each module provides either 4 or 8 access control inputs capable of voltage or dry contact activation. Each module provides either 4 or 8 lock outputs, each one programmable for fail-safe, fail-secure, dry contact, and fire alarm override for egress lock control. Each lock output is also programmable to either of the two voltages available when used in a FlexPower dual voltage power system. Each output is supervised for voltage and/or blown fuse with the fault reported to the host power supply.

        Agency Listings/Standards
        Product listed for use in LifeSafety Power equipment

        USA: UL 294, UL 603, UL 864, UL 1076, UL 1481, UL 2044, UL 2572, FCC Part 15, Subpart B CSFM Approved Canada: ULC S318, ULC S319, ULC S527, CSA C22.2#107.1, CSA 22.2 #60950

        Electrical Ratings

        ParameterRating
        Lock Outputs4 / 8
        Access Control Inputs4 / 8
        Input Voltage12 and/or 24 VDC
        Input Current20 Amps
        Output Voltage (Jumper Select)12/24 VDC
        Output Current C4/C8Fused at 3A per output
        Output Current C4P/C8PClass II at 2.5A per output
        Fire Alarm InterfacePer Output
        Supports follow on modulesYes

        C4/C8 C4P/C8P

        Features

        Flexibility

        1. Multiple outputs for direct lock control and additional accessory power distribution modules
        2. Colored coded by function configuration jumpers for ease of programming
        3. Configurable fail-safe, fail-secure, and dry contact modes of operation
        4. Fire Alarm Interface (FAI) when used with an FPO power supply
        5. Fault detection and reporting to host power supply
        6. FlexConnect® Dual Buss Architecture

        Output Protection

        1. C4/C8 ATM style fuse: 3A/per output
        2. C4P/C8P Solid state circuit breaker: 2.5A/per output

        Visual Indicators

        1. DC voltage per output (green LED)
        2. Fault (yellow LED)

        Mechanical

        1. Multiple modules can be daisy chained to add additional outputs
        2. Snap-in style mounting standoffs with fast-on connect cables for easy field installation