4 Megapixel IP Bullet Camera 2.8-12mm Motorized Zoom Lens IP67 164ft. Night Vision


$499.99


Availability: In Stock
Ships Same Day
List Price: $629.00
SKU: WEC-IP40
Product #: 86374
Manufacturer:

Remote Login Support:
Quantity

This bullet surveillance camera records 4mp resolution footage at 20 frames per second. It has a 2.8-12mm motorized varifocal lens and infrared LEDs for recording over 164 feet away in total darkness. The security camera also comes equipped with Wide Dynamic Range and digital noise reduction. It meets IP67 standards and can be used outdoors. Footage is recorded to an NVR and can be monitored remotely via computer or mobile device.

Features:

  • 1/3" 4 Megapixel Progressive Scan Omnivision OV4689 Image Sensor
  • 4MP@20fps Maximum Recording Resolution
  • 2.8mm - 12mm motorized lens
  • Smart Detection (Tripwire, Intrusion, Scene Change, Face Detect and Heat map)
  • WDR(120dB), Day/Night(ICR), 3DNR, AWB, AGC, BLC
  • Multiple network monitoring: Web viewer, CMS(SmartPSS) & iMaxCamPro
  • 2/1 Alarm in/out, 1/1 audio in/out
  • Max. IR LEDs Length 50m
  • Micro SD memory, IP67, PoE

SPECIFICATIONS
Model WEC-IP40
Image Sensor 1/3" 4 Megapixel Progressive Scan Omnivision OV4689 CMOS Image Sensor
DSP Ambarella S2Lm
Effective Pixels 2688 (H) x 1520 (V)
Scanning System Progressive
Electronic Shutter Speed Auto / Manual; 1/3(4) - 10,000s
Min. Illumination 0.01 Lux/F1.4 (color); 0 Lux/F1.4 (IR On)
S/N Ratio >50dB
Video Output 1 port
Camera Features
Max IR LED Distance 164 ft. / 50m
Day/Night Auto(ICR) / Color / B/W
Backlight Compensation BLC / HLC / WDR (120dB)
White Balance Auto / Sunny / Night / Outdoor / Customized
Gain Control Auto / Manual
Noise Reduction 3DNR
Privacy Masking Up to 4 areas
Lens
Focal Length 2.7mm ~ 12mm
Field of View Horizontal: 100° ~ 33°
Max. Aperture F1.4
Focus Control Motorized
Lens Type Motorized/ Auto Iris(DC)
Mount Type Board-in Type
Video
Compression H.264 / H.264H / H.264B / MJPEG
Image Resolution 4MP (2560 x 1440) / 3MP (2304 x 1296) / 1080p (1920 x 1080) / 1.3MP (1280 x 960) / 720p (1280 x 720) / D1 (704 x 480) / CIF (352 x 240)
Frame Rate Main Stream 4MP @ 20fps; 3MP / 1080p / 1.3MP / 720p @ 30fps
Extra Stream D1/(1 ~ 25/30fps)
Third Stream 720p@ (1-20fps)
Bit Rate H.264: 32Kbps ~ 10Mbps
Corridor Mode Support
Audio
Compression G.711a/ G.711u/ AAC
Interface 1/1 channel In/Out
Smart Detection
Smart Detection Tripwire
Intrusion
Abandoned/Missing
Scene Change
Audio Detect
Face Detect
Network
Network Interface RJ-45 (10/100M)
Wi-Fi N/A
Protocol IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, Bonjour, 802.1x
Compatibility ONVIF Profile S, PSIA, CGI
Max. User Access 20 users
Smart Phone iPhone, iPad, Android, Windows Phone
Auxiliary Interface
Local Storage Micro SD Max 128GB
RS485 N/A
Alarm 2/1 channel In/Out
PIR Sensor Range N/A
General
Power Supply DC12V, PoE (802.3af)
Power Consumption < 11W (with IR on, motorized lens working)
Working Environment -40°F ~ +140°F (-40°C ~ +60°C), < 95%RH
Protection Rating IP67
Vandal Resistance N/A
Dimensions 10.74" x 3.74" x 3.74" (272.9 mm × 94.9mm× 94.9mm)
Weight 2.43 lbs

Average Customer Rating:


1 Most useful customer reviews
Dev Miller
May 14, 2016
This customer purchased the item at our site.
Highly functional and equipped with all the features you need in a security camera, this one is a gem. It is quite expensive; the discount is a helping hand, but completely worth it. Not only is the quality great but it also has other top notch features that just make this product all the more worth the money you spend on it. I especially appreciated the infrared LEDs which allow you to take pictures and footage from over 164 feet away….in complete darkness.

I also like to switch my phone on and take a look at what is happening around my house every night before sleeping. Instead of setting up a computer for this type of thing I like to usually use my phone. And luckily with this camera all sorts of phones can be used to access your video footages as well as snapped pictures. I am using an Android phone currently and there is no issue at all. But it is compatible with all types of phones.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}