VMS V17.1, Service Pack 1 - 20180905


:
from
to
Clear all

New:
Support for new GV-IP devices (Patch V17.1.0.012)
o GV-ABL2702 / ABL8712
o GV-AVD2700 / AVD8710
o GV-EBD8711
o GV-SD2301 V2 / GV-SD2411 V2

Improved:
Compliance with the European Union’s General Data Protection Regulations (GDPR) (Patch V17.1.0.002)

Fixed:
1. System behaving abnormally after manually adding the upgraded GV-BX2600 firmware version V101_1080321 on IP Device Setup (Patch V17.1.0.010)
2. Random failure to receive camera image when multiple GV-Edge Recording Managers are connected to GV-VMS simultaneously after the Use Sub Stream FIFO function is enabled on CMS Server (Patch V17.1.0.001)
3. Camera connection failure if over 64 channels are connected through RTSP protocol simultaneously (Patch V17.1.0.003)
4. Chinese I/O names of GV-IO Box 4E appearing gibberish on the Content List of GV-VMS traditional Chinese language version (Patch V17.1.0.007)
5. Repeated watchdog errors upon the system reboot after Wide Angle is selected from Camera Lens settings (Patch V17.1.0.010)
6. Blurry image display of a camera when it is switched from a multi-channel division to single-channel division changed to single stream or has focus View enabled, after selecting Wide Angle from Camera Lens settings (Patch V17.1.0.010)
7. Blurry image display if the camera channel is opened in the Advanced Motion Detection dialog box under the multi-channel division and then switched to a single-channel division (Patch V17.1.0.010)
8. Inability to switch to substream after the camera channel is opened in the Advanced Motion Detection dialog box under the single-channel division (Patch V17.1.0.010)
9. Failure to record motion events after the motion recording function becomes stagnant over a prolonged period of time (Patch V17.1.0.009)
10. Inability to filter out “scene change” events through Event List Query on WebCam Server (Patch V17.1.0.008)
11. Privacy Mask feature becoming inapplicable to recorded clips through WebCam Server on non-IE browsers (Patch V17.1.0.004)
12. Inability to apply “clean time” and “transaction end dwell time” settings when setting up POS text overlay (Patch V17.1.0.011)
13. Inability to display corresponding system logs on GV-Vital Sign Monitor when the camera is disconnected or re-connected (Patch V17.1.0.006)

NOTE: If this is your first time installing V17.1 or you are upgrading from GV-VMS V16.x.x or an older version, please install with GV-VMS V17.1.0.100 Installer. It will include GV-VMS V17.1 main program + GV17.1.0.100 Patch

GV-VMS V17.1.0.100 Installer
http://54.200.75.24/english/EncodeUrl3. ... GV-VMS.zip 

NOTE: If you have already installed V17.1, please apply the patch below.

Patch / Procedure ( GV-VMS_V17.1.0.100 )

1. Stop GV-VMS and all related software.
2. Unzip the file and run GV-VMS_V17.1.0.100.exe
3. Restart GV-VMS

ATTACHMENTS
 GV-VMS_V17.1.0.100.zip
(43.53 MiB) Downloaded 740 times
 Version_History_VMS_1710100.pdf
(612.36 KiB) Downloaded 378 times