AQS2410 Series Switching Power Supply

AQS2410 Series are single voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQS2410-16F16R2

Number of Outputs: 16
Number of Relays: 16
Fuse Type: Glass fuse
Fuse Rating [Amp]: 2
Fire Alarm Interface: Yes

16 Amp, 24 VDC

The Securitron AQS2410 Series of switching power supplies are single voltage, UL listed, supervised units. These units are field selectable with integrated battery charger. They provide 10A @ 24VDC, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Single voltage 24 VDC continuous output
• Up to 92% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

eFlow4N8DV

Power Supply Charger, 8 PTC Class 2 Outputs, 12/24VDC @ 4A, Aux Output, FAI, LinQ2 Ready, 115VAC, BC300 Enclosure

Altronix eFlow4N8DV is a power supply/chargers converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into eight (8) PTC protected outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 4A max. They also offer a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

• Specifications
• Agency Listings
• Accessories
• Dimensions & Weight
•  Documentation

• Input

  • 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.1A.
  • Input fuse: 5A/250V.

• Output

  • Eight (8) PTC protected outputs (auto-resettable).
  • 12VDC or 24VDC @ 4.0A supply current.
  • Outputs are rated @ 2A.
  • Auxiliary output rated @ 1A (unswitched).
  • Overvoltage protection.

• Battery Backup

  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.

• Supervision

  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
  • Battery fail and presence supervision (form "C" contacts).
  • Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.

• Fire Alarm Disconnect

  • Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.

• Electrical

  • • Temperature:

      • Operating: 0° C to 49° C (32° F to 120° F).
      • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.

    • BTU/Hr (approx.):

      • 12VDC: 25 BTU/Hr.
      • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement: 462VA.

• Visual Indicators

  • Green AC Power LED indicates 220VAC present.
  • AC input and DC output LED indicators.

• Additional Features

  • Short circuit and overload protection.
  • Unit is complete with power supply, enclosure, battery leads, and cam lock

AQD1 Series Switching Power Supply

AQD1 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD1-4C1

Number of Outputs: 4
Number of Relays: 0
Fuse Type: PTC polyswitch
Fuse Rating [Amp]: 1
Fire Alarm Interface: No

1 Amp, Dual Voltage

The Securitron AQD1 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with an integrated battery charger. They provide 1 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 82% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Integrated battery charging circuit prevents overvoltage on locking devices
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD1 Series Switching Power Supply

AQD1 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD1-4C1

Number of Outputs: 4
Number of Relays: 0
Fuse Type: PTC polyswitch
Fuse Rating [Amp]: 1
Fire Alarm Interface: No

1 Amp, Dual Voltage

The Securitron AQD1 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with an integrated battery charger. They provide 1 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 82% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Integrated battery charging circuit prevents overvoltage on locking devices
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD1 Series Switching Power Supply

AQD1 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD1-4F1

Number of Outputs: 4
Number of Relays: 0
Fuse Type: Glass fuse
Fuse Rating [Amp]: 1
Fire Alarm Interface: No

1 Amp, Dual Voltage

The Securitron AQD1 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with an integrated battery charger. They provide 1 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 82% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Integrated battery charging circuit prevents overvoltage on locking devices
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD1B Series Switching Power Supply

AQD1B Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD1B

Number of Outputs: 1
Number of Relays: 0
Fuse Type: NA
Fuse Rating [Amp]: NA
Fire Alarm Interface: No

1 Amp, Dual Voltage

The Securitron AQD1 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with an integrated battery charger. They provide 1 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 82% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Integrated battery charging circuit prevents overvoltage on locking devices
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD2 Series Switching Power Supply

AQD2 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD2-24F1

Number of Outputs: 4
Number of Relays: 0
Fuse Type: Glass fuse
Fuse Rating [Amp]: 1
Fire Alarm Interface: No

2 Amp, Dual Voltage

The Securitron AQD2 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 2 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 85% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V and 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD/ AQS PDB-8F8R / 8C8R Access Control Boards with Fire Alarm Interface

The PDB-8F8R / 8C8R is a versatile, compact way to distribute and control power for Access Control Systems with Fire Alarm Interface. This Access Control board is an 8 position power distribution board with individual relays with input control for each output.

Access Control Boards with Fire Alarm Interface

Power plus interfaces for sophisticated access control. The PDB-8F8R and PDB-8C8R split a power supply main output into eight fused- or PTC circuit breaker-protected outputs. Each output is individually configurable to respond and react to access control relay inputs and/or fire trigger.

Product Features

• 8 Heavy duty Relays with individual Inputs and Status LED’s
• Each Relay Input can be Activated from Low Current Open Collector, Normally Closed or Normally Open Switch
• EOL End of Line Resistor Fire Interface Master Trigger de-energizes all Output Relays that are Enabled
• Universal 12 – 28VDC power input (Nominal 12-24VDC)
• 8C8R is Class 2 Power Limited
• Class 1 wiring required for 8F8R unless powered by a UL 294 or UL 603 or ULC S318 or ULC S533 listed power supply with class 2 output. There shall be a min of ¼ separation between power limited and non-power-limited circuits.
• Available with Fuses or PTC Circuit Breakers
• Each Output may be Individually Configured for: Fire Trigger (FT) Enabled or (FTD) Disabled N/O or N/C Option Configures the Relay Switched Output
• Each Output 1-8 has a protected, continuous Output and a Relay controlled Output
• Control Power and Main Lock Power may be Isolated (Separate Power Supplies) at Users Option

AQD2 Series Switching Power Supply

AQD2 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD2-8F8R1

Number of Outputs: 8
Number of Relays: 8
Fuse Type: Glass fuse
Fuse Rating [Amp]: 1
Fire Alarm Interface: Yes

2 Amp, Dual Voltage

The Securitron AQD2 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 2 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 85% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V and 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD/ AQS PDB-8F8R / 8C8R Access Control Boards with Fire Alarm Interface

The PDB-8F8R / 8C8R is a versatile, compact way to distribute and control power for Access Control Systems with Fire Alarm Interface. This Access Control board is an 8 position power distribution board with individual relays with input control for each output.

Configure AQD/ AQS PDB-8F8R / 8C8R Access Control Boards with Fire Alarm Interface

Access Control Boards with Fire Alarm Interface

Power plus interfaces for sophisticated access control. The PDB-8F8R and PDB-8C8R split a power supply main output into eight fused- or PTC circuit breaker-protected outputs. Each output is individually configurable to respond and react to access control relay inputs and/or fire trigger.

Product Features

• 8 Heavy duty Relays with individual Inputs and Status LED’s
• Each Relay Input can be Activated from Low Current Open Collector, Normally Closed or Normally Open Switch
• EOL End of Line Resistor Fire Interface Master Trigger de-energizes all Output Relays that are Enabled
• Universal 12 – 28VDC power input (Nominal 12-24VDC)
• 8C8R is Class 2 Power Limited
• Class 1 wiring required for 8F8R unless powered by a UL 294 or UL 603 or ULC S318 or ULC S533 listed power supply with class 2 output. There shall be a min of ¼ separation between power limited and non-power-limited circuits.
• Available with Fuses or PTC Circuit Breakers
• Each Output may be Individually Configured for: Fire Trigger (FT) Enabled or (FTD) Disabled N/O or N/C Option Configures the Relay Switched Output
• Each Output 1-8 has a protected, continuous Output and a Relay controlled Output
• Control Power and Main Lock Power may be Isolated (Separate Power Supplies) at Users Option

AQD2 Series Switching Power Supply

AQD2 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD2-8F8R1

Number of Outputs: 8
Number of Relays: 8
Fuse Type: Glass fuse
Fuse Rating [Amp]: 1
Fire Alarm Interface: Yes

2 Amp, Dual Voltage

The Securitron AQD2 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 2 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 85% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V and 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD4 Series Switching Power Supply

AQD4 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD4

Number of Outputs: 1
Number of Relays: 0
Fuse Type: NA
Fuse Rating [Amp]: NA
Fire Alarm Interface: No

4 Amp, Dual Voltage

The Securitron AQD4 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 4 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 89% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V or 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD4 Series Switching Power Supply

AQD4 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD4-16F16R1

Number of Outputs: 16
Number of Relays: 16
Fuse Type: Glass fuse
Fuse Rating [Amp]: 1
Fire Alarm Interface: Yes

4 Amp, Dual Voltage

The Securitron AQD4 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 4 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 89% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V or 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD4 Series Switching Power Supply

AQD4 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD4-16F16R1

Number of Outputs: 16
Number of Relays: 16
Fuse Type: Glass fuse
Fuse Rating [Amp]: 1
Fire Alarm Interface: Yes

4 Amp, Dual Voltage

The Securitron AQD4 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 4 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 89% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V or 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD4 Series Switching Power Supply

AQD4 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD4-4C1

4 Amp, Dual Voltage

The Securitron AQD4 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 4 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 89% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V or 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs

AQD4 Series Switching Power Supply

AQD4 Series are dual voltage, UL listed, supervised units.

You have configured the following part number:
SKU: AQD4-8C1

Number of Outputs: 8
Number of Relays: 0
Fuse Type: PTC polyswitch
Fuse Rating [Amp]: 1
Fire Alarm Interface: No

4 Amp, Dual Voltage

The Securitron AQD4 Series of switching power supplies are dual voltage, UL listed, supervised units. These units are field selectable with a dedicated battery charging circuit. They provide 4 Amp at 12VDC or 24VDC continuous, with up to 16 independently controlled power limited outputs.

Product Features

• All combinations of AQ power supplies and distribution boards are UL listed
• Dual voltage 12 or 24 VDC field selectable continuous output
• Up to 89% efficiency which results in decreased operating costs and lengthens the lifespan of electronics
• Tolerates brownout or overvoltage input ± 15% of nominal voltage
• Thermal shutdown protection with auto restart
• Circuit breaker protects against overcurrent and reverse battery faults
• Dedicated battery charging circuit prevents overvoltage on locking devices
• Low battery cutoff at 9V at 12V or 18V at 24V
• Available with a single relay fire trigger or individually triggered relayed outputs