:
from
to
SC4000-XX BOSCH FULL DATA TRANSFER, 8 ZONE INPUTS & 4 OUTPUTS, UL & NFPA72, UHF
SKU: WECSC4000-XX
The primary SAFECOM Radio Communicator system is the SC4000. All other SAFECOM Radio communicator units are derived from capabilities and features found on the SC4000. The SC4000 is normally configured as a stand-alone device for interface with the remote site’s existing alarm panel. Each SC4000 is capable of monitoring contact open/closure status for four inputs. These input lines allow End-Of-Line (EOL) Supervisory Loop status monitoring for normal, open and short conditions. Up to four (4) Loops may be monitored by the SC4000 as a UL Listed device. Up to eight auxiliary loops, two per Input, may be monitored when the SC4000 is programmed for expanded mode as a non-UL Listed device. Any change of input status condition, is immediately reported to the SC9000 computer. The SC4000 is normally configured as a stand-alone device for interface with the customer's existing alarm panel. It is located at a customer site; commercial or residential. It is usually mounted on the wall, next to the existing alarm panel. The antenna can be mounted directly on the SC4000 enclosure or remotely positioned for optimum radio reception and transmission. The SC4000 is normally installed to Intercept all of the alarm panel signals from the host alarm panel, also known as a Dialer. The Dialer message is then digitally encoded and sent to the Central Station SAFECOM SC9000 computer via the SAFECOM network. When SAFECOM is installed, it is usually the PRIMARY means of alarm panel communication, with the phone line being the backup route. The SC4000 is capable of interfacing with most alarm panels that use any industry standard pulse format (3+1, 4+2, FBI Superfast, Radionics Slow, etc.) or Dual Tone Multiple Frequency, DTMF (ADEMCO Contact ID, ADEMCO High Speed, or ADEMCO 4+2 Express), or SIA-R, or Radionics Modem and Modem IIe, or BFSK formats.
- Shipping info
We deliver worldwide
- Payment methods
- Return Policy
We accept returns
- Customer Reviews
Check out our customer Reviews
The primary SAFECOM Radio Communicator system is the SC4000. All other SAFECOM Radio communicator units are derived from capabilities and features found on the SC4000. The SC4000 is normally configured as a stand-alone device for interface with the remote site’s existing alarm panel. Each SC4000 is capable of monitoring contact open/closure status for four inputs. These input lines allow End-Of-Line (EOL) Supervisory Loop status monitoring for normal, open and short conditions. Up to four (4) Loops may be monitored by the SC4000 as a UL Listed device. Up to eight auxiliary loops, two per Input, may be monitored when the SC4000 is programmed for expanded mode as a non-UL Listed device. Any change of input status condition, is immediately reported to the SC9000 computer. The SC4000 is normally configured as a stand-alone device for interface with the customer's existing alarm panel. It is located at a customer site; commercial or residential. It is usually mounted on the wall, next to the existing alarm panel. The antenna can be mounted directly on the SC4000 enclosure or remotely positioned for optimum radio reception and transmission. The SC4000 is normally installed to Intercept all of the alarm panel signals from the host alarm panel, also known as a Dialer. The Dialer message is then digitally encoded and sent to the Central Station SAFECOM SC9000 computer via the SAFECOM network. When SAFECOM is installed, it is usually the PRIMARY means of alarm panel communication, with the phone line being the backup route. The SC4000 is capable of interfacing with most alarm panels that use any industry standard pulse format (3+1, 4+2, FBI Superfast, Radionics Slow, etc.) or Dual Tone Multiple Frequency, DTMF (ADEMCO Contact ID, ADEMCO High Speed, or ADEMCO 4+2 Express), or SIA-R, or Radionics Modem and Modem IIe, or BFSK formats.
The mission of WorldEyeCam, Inc.is to provide consumers with the most up to date security products at the best prices available on the market today. As security is advancing at such a rapid rate we try to exceed our customers expectations by providing unparallel customers service and technical support. We strive to stay on the forefront of the most up to date products and news in regards to our industry. Our website www.Worldeyecam.com contains a broad spectrum of surveillance products as well as industry information. Our website is updated daily as we make our way through this technological wave of security products. Our goal and focus is to stay on top of the latest innovations in technology and securities and to remain a trusted industry leader for years to come.
WorldEyeCam is a CCTV products distribution and integration company located in Southern California in the heart of Orange County. We operate out of a 14,000 sq.ft warehouse & a separate product demo show room. We proudly offer 1st class technical support for our customers we serve with the complete understanding that it is you, the customer that matters to every successful business. If you haven't already learned the hard way, you will understand that it takes more than just a website and the ability to sell a product - anyone can sell a product! But, it takes commitment to offerDEPENDABLE AND CONSISTENT technical support & customer SERVICE AFTER THE SALE. We stand behind our products 100% and we are in it for the long haul & to keep you, the customer happy.
Why Buy From The Worldeyecam Security Store. 30 Day Money Back Guarantee Latest Product Version Guarantee Fast Accurate Same Day Shipping Friendly customer service.
We are committed to providing our customers with "Complete Purchasing Experience Satisfaction" This means quality customer service from pre-purchase support, easy secure encrypted ordering, fast UPS shipping , comprehensive after sales tech-support by certified professionals and hassle free returns.
Shipping Information
FREE UPS Ground Shipping Continental US addresses on all orders over $1000.00 All in stock items are usually shipped Same Day (*not including weekends and holidays). For any Order for Bulk Cables that weigh over 75 lbs will be charged extra. Orders placed before 3 pm PST, or 2 pm for Expedited orders (Next Business Day Air or 2nd Business Day Air) can usually be shipped the same day. Orders placed by internet or by phone receive the same priority handling.
EZ - Hassle FREE - Returns
WorldEyeCam provides a 15-30-day money back guarantee on all products and services purchased, except special order items and all international orders. If for any reason you are not satisfied with your purchase, simply notify us by using this form here:
Submit RMA Return Form *Click Here* and we will immediately issue a Return Material Authorization Number.
