:
from
to
Pelco FX82051MSTR-2 Multimode Unmanaged Ethernet Switch, 2 Fiber, ST Connector
SKU: FX82051MSTR-2
Features :
- Unmanaged Ethernet Switch for the Transport of Bidirectional Ethernet Data:
- Five 10BASE-T/100BASE-TX Ports
- One 100BASE-FX Port That Accepts 2 Fibers
- Compatibility with Third-Party 100BASE-FX Ethernet Equipment (Multimode ST and SC Models Only)
- Designed for Point-to-Point Applications
- User-Selectable Networking Functions for Each 10BASE-T/100BASE-TX Port:
- Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex Modes
- 10 Mbps or 100 Mbps Selectable
- Full-Duplex or Half-Duplex Mode Selectable
- Enabling/Disabling of Flow Control
- Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
- Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
- Multimode Fiber Support for Distances up to 6 km
- Laser Diode for Transmission of Optical Signals
- Environmentally Hardened
- Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- No Performance Adjustments Required
- 12 VDC or 24 VAC Power Supply
- Stand-Alone and Rack-Mountable Modular Design
- LED Indicators for Monitoring of Optic Signal/Laser Status, 100BASE-FX Port Status Including Far End Fault Indication (FEFI), 10BASE-T/100BASE-TX Port Status, and Operating Power
- Shipping info
We deliver worldwide
- Payment methods
- Return Policy
We accept returns
- Customer Reviews
Check out our customer Reviews
Pelco FX82051MSTR-2 Multimode Unmanaged Ethernet Switch, 2 Fiber, ST Connector
The Pelco FX82051 unmanaged Ethernet switch provides five 10Base-T/100Base-TX ports and one 100Base-FX fiber port for the transport of bidirectional Ethernet data. Two fibers are required to transport bidirectional data over the fiber port. Available in multimode and single-mode versions, the FX82051 switch is designed for point-to-point applications.
Autonegotiation
The fiber port on the FX82051 switch is forced to full-duplex 100 Mbps operation. Networking functions for each of the five 10Base-T/100Base-TX ports (RJ-45 twisted-pair copper ports) are user-selectable by means of a rotary switch. Autonegotiation allows a 10Base-T/100Base-TX port to automatically negotiate between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes. If autonegotiation is not desired, a port can be forced to specific modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or full-duplex mode, and the enabling/disabling of flow control. The auto MDI/MDI-X feature allows each RJ-45 port to connect to either a straight-through or crossover RJ-45 cable.
Rack Mountable
Modular in design, the FX82051 unit can be rack mounted or can be used as a stand-alone module. Rack mounting is accomplished using the RK5000 Series rack mount chassis. As a stand-alone module, the unit can be placed on a desktop or can be mounted to a wall.
Features :
Specifications :
The Pelco FX82051 unmanaged Ethernet switch provides five 10Base-T/100Base-TX ports and one 100Base-FX fiber port for the transport of bidirectional Ethernet data. Two fibers are required to transport bidirectional data over the fiber port. Available in multimode and single-mode versions, the FX82051 switch is designed for point-to-point applications.
Autonegotiation
The fiber port on the FX82051 switch is forced to full-duplex 100 Mbps operation. Networking functions for each of the five 10Base-T/100Base-TX ports (RJ-45 twisted-pair copper ports) are user-selectable by means of a rotary switch. Autonegotiation allows a 10Base-T/100Base-TX port to automatically negotiate between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes. If autonegotiation is not desired, a port can be forced to specific modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or full-duplex mode, and the enabling/disabling of flow control. The auto MDI/MDI-X feature allows each RJ-45 port to connect to either a straight-through or crossover RJ-45 cable.
Rack Mountable
Modular in design, the FX82051 unit can be rack mounted or can be used as a stand-alone module. Rack mounting is accomplished using the RK5000 Series rack mount chassis. As a stand-alone module, the unit can be placed on a desktop or can be mounted to a wall.
Features :
- Unmanaged Ethernet Switch for the Transport of Bidirectional Ethernet Data:
- Five 10BASE-T/100BASE-TX Ports
- One 100BASE-FX Port That Accepts 2 Fibers
- Compatibility with Third-Party 100BASE-FX Ethernet Equipment (Multimode ST and SC Models Only)
- Designed for Point-to-Point Applications
- User-Selectable Networking Functions for Each 10BASE-T/100BASE-TX Port:
- Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex Modes
- 10 Mbps or 100 Mbps Selectable
- Full-Duplex or Half-Duplex Mode Selectable
- Enabling/Disabling of Flow Control
- Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
- Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
- Multimode Fiber Support for Distances up to 6 km
- Laser Diode for Transmission of Optical Signals
- Environmentally Hardened
- Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- No Performance Adjustments Required
- 12 VDC or 24 VAC Power Supply
- Stand-Alone and Rack-Mountable Modular Design
- LED Indicators for Monitoring of Optic Signal/Laser Status, 100BASE-FX Port Status Including Far End Fault Indication (FEFI), 10BASE-T/100BASE-TX Port Status, and Operating Power
Specifications :
| Channels | Switch Type: Unmanaged Layer 2 |
| Modulation | Switching Method: Store and forward |
| Data Rate | 10/100 Mbps |
| Compliance | IEEE 802.3, 802.u, 802.3x |
| Interface | Auto MDI/MDI-X |
| Operating Modes | Half-duplex or full-duplex |
| MAC Address Table Size | 1,024 MAC address entries with automatic learning and aging |
| Quality of Service | IEEE 802.1p priority, tag-based, 4 queues per port, weighted fair queuing scheduling |
| Maximum Frame Size |
Untagged Ethernet frames up to 1,518 bytes Tagged Ethernet frames up to 1,522 bytes |
| Wavelength | 1310 nm |
| Optical Power Budget | 26dB |
| Maximum Transmission Distance | 3.7 Mile (6km) |
| Connectors |
5x RJ-45, 10Base-T/100Base-TX 1x ST dual-fiber connector |
| Power Requirements | 12VDC or 24VAC (includes 12VDC adapter) |
| Power Consumption | 500mA |
| Operating Temperature | -40 ~ 167°F (-40 ~ +75°C) |
| Dimensions (WxHxD) | 2.3 x 4.8 x 8.8" (57 x 122 x 222mm) |
| Weight | 4 lbs (1.8kg) |
The mission of WorldEyeCam, Inc.is to provide consumers with the most up to date security products at the best prices available on the market today. As security is advancing at such a rapid rate we try to exceed our customers expectations by providing unparallel customers service and technical support. We strive to stay on the forefront of the most up to date products and news in regards to our industry. Our website www.Worldeyecam.com contains a broad spectrum of surveillance products as well as industry information. Our website is updated daily as we make our way through this technological wave of security products. Our goal and focus is to stay on top of the latest innovations in technology and securities and to remain a trusted industry leader for years to come.
WorldEyeCam is a CCTV products distribution and integration company located in Southern California in the heart of Orange County. We operate out of a 14,000 sq.ft warehouse & a separate product demo show room. We proudly offer 1st class technical support for our customers we serve with the complete understanding that it is you, the customer that matters to every successful business. If you haven't already learned the hard way, you will understand that it takes more than just a website and the ability to sell a product - anyone can sell a product! But, it takes commitment to offerDEPENDABLE AND CONSISTENT technical support & customer SERVICE AFTER THE SALE. We stand behind our products 100% and we are in it for the long haul & to keep you, the customer happy.
Why Buy From The Worldeyecam Security Store. 30 Day Money Back Guarantee Latest Product Version Guarantee Fast Accurate Same Day Shipping Friendly customer service.
We are committed to providing our customers with "Complete Purchasing Experience Satisfaction" This means quality customer service from pre-purchase support, easy secure encrypted ordering, fast UPS shipping , comprehensive after sales tech-support by certified professionals and hassle free returns.
Shipping Information
FREE UPS Ground Shipping Continental US addresses on all orders over $1000.00 All in stock items are usually shipped Same Day (*not including weekends and holidays). For any Order for Bulk Cables that weigh over 75 lbs will be charged extra. Orders placed before 3 pm PST, or 2 pm for Expedited orders (Next Business Day Air or 2nd Business Day Air) can usually be shipped the same day. Orders placed by internet or by phone receive the same priority handling.
EZ - Hassle FREE - Returns
WorldEyeCam provides a 15-30-day money back guarantee on all products and services purchased, except special order items and all international orders. If for any reason you are not satisfied with your purchase, simply notify us by using this form here:
Submit RMA Return Form *Click Here* and we will immediately issue a Return Material Authorization Number.
