Industrial Communication and Control

CUI Inc. SMI Family Plug Wall Adapters are Ac-Dc power supplies with interchangeable blades. The series are each designed to meet the latest Level VI efficiency standards set to go into effect February 2016. This standard aims to significantly lower th e amount of power consumed when the end application is not in use or is no longer connected to the system.

Designed for global use, CUI’s SMI adapters include plug options for North America, Europe, the United Kingdom, Australia, and China. These high efficiency power supply adapters are a continuation of CUI’s initiative to provide customers with global solutions utilizing the latest in green power technology.

Features

• Up To 18 W Continuous Power
• DOE Level VI, CEC, ErP Stage 2
• No Load Power Consumption < 0.1 W
• Universal Input Voltage Range
• Interchangeable Ac Blades For Global Use
• Over Voltage, Over Current, And Short Circuit Protections
• UL/cUL, RCM, CCC, And PSE ty Approvals

Specifications:

Specifications:

Features

• Interchangeable SFP modules allow for multiple fiber mode/type conversion options (single-mode, multimode, long haul, short haul, etc.)
• Extended operating temperatures
• Multiple mounting options (Desktop, DIN Rail, IE-PowerTray/18-AC [for high-density installations])
• Compact size conserves space
• AC or DC powering options
• Ideal for use with IMC Networks’ SFPs
• SFP Modules are hot-swappable; no need to power-down chassis when upgrading or troubleshooting a single module
• Diagnostic LEDs

Specifications:

Connect RS-485 Devices to your USB Port 
Perfect for Field Service Applications 
Small - Fits easily into any laptop bag 
USB Port Powered 
USB 2.0 (12 Mbps) Compatible 
RS-485 Data rates up to 921.6 Kbps 
Removable Terminal Block for Easy Wiring 
High Retention USB Connector 
Supports Windows 98, ME, 2000, XP, Vista, Win7 32 & 64 bit

Features

• Connect RS-485 Devices to your USB Port
• Perfect for Field Service Applications
• Small - Fits easily into any laptop bag
• USB Port Powered
• USB 2.0 (12 Mbps) Compatible
• RS-485 Data rates up to 921.6 Kbps
• Removable Terminal Block for Easy Wiring
• High Retention USB Connector
• Supports Windows 98, ME, 2000, XP, Vista, Win7 32 & 64 bit

Specifications:

Measuring less than 3.5 inches deep and 2 inches wide, the MiniMc is the industry’s smallest media converter with both data connections on the same side of the unit, and at a fraction of the cost of other alternatives. Plug-and-play operation with a variety of model types and powering options make the MiniMc series easy and convenient to use.

Applications

Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Media conversion’s greatest benefits are flexibility and cost savings.

Features

• One 100 Mbps FDX fiber port or 1 SFP fiber port
• One 10/100 Base-TX twisted pair port
• AutoCross automatic selection between crossover or straight-through connection
• Status LEDs
• 18 connections in the 1.5U high IE-PowerTray/18 Chassis

Specifications:

Specifications:

Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Measuring less than 3.5 inches deep and 2 inches wide, the MiniMc-Gigabit and Giga-MiniMc are one of the industry’s smallest media converters with both data connections on the same side of the unit. An optional fiber SFP port gives network operators the flexibility to upgrade network equipment to different fiber interfaces. Designed and manufactured in the USA, the MiniMc Series extends 10 and 100 Mbps twisted pair network segments up to 80 km over fiber.

Applications

Both a media and data rate converter, the MiniMc features 10/100 Auto Negotiation on the copper port while the fiber port operates at 100 Mbps full duplex. MiniMc 10/100 switching fiber converters are ideal for all premises, FTTD, LAN-to-LAN or LAN-to-MAN fiber networking applications.

Features

• 10/100 Mbps switching MiniMc connects 10 or 100 Mbps copper to 100 Mbps fiber (fixed or SFP version)
• 6-year comprehensive warranty on converter and power adapter
• User-friendly 10/100 Mbps Auto Negotiation technology on MiniMcs
• AutoCross feature for twisted pair connection on all converters
• MiniMcs include country-specific, high-reliability AC power adapters and can also be powered with an optional USB-power cable
• Available with multimode fiber or single-mode fiber, single-strand fiber, CWDM fiber and SFP connectors
• Compact, metal enclosures with external AC power adapters
• IE-PowerTray/18-AC chassis supports up to 18 modules in the 1.5U high, rack-mountable enclosure

Specifications:

Designed to fit many applications, the ESW105 and ESW108 series are plug-and-play industrial Ethernet Switches with an ultra compact IP30 DIN rail case, 6 way mountable panel brackets, LEDs for Power, (Link / Speed / Activity for each port), 12 to 36 V DC and 10 to 24V AC power inputs with removable terminal blocks. These switches are perfect for any applications that require special protection from hash environments.

Features

• Ultra compact design - less than 1 inch wide
• UL/cUL Class I/Division 2 Groups A,B,C, and D
• Designed to meet Level 3 (Heavy) industrial environments - EN61000-6-2 Certifications
• Shock, vibration, free fall tested
• LC single and multimode fiber ports
• 100M, full/half duplex, MDI/MDI-X (Auto-negotiate)
• Supports IEEE 802.3, 802.3u, and 802.3x standards
• IP30 rated DIN rail case with 6 different panel mount options
• Dual power inputs, 12 to 36 V DC and 10 to 24 V AC
• 2K MAC addresses

Specifications:

Model HESP4DR meets IEEE 1000-4-5: 1995 and IEEE C62.41-1991 recognized standards for premium surge protectors. It protects against lightning strikes, power surges, and other types of voltage disturbances with three stages of protection for each supported line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). Five RS-232 signals on terminal blocks are supported with a clamping voltage of 6.8 Volts.

Features

• Three stages of protection on every data line: 1) Gas discharge tube, 2) Series resistor, 3) Transient voltage suppressor
• Protected signal ground connection
• Rugged terminal block connections
• Dedicated chassis ground lug
• Wide operating Temperature
• NEMA TS2

Specifications:

The 4WSD9TB and 4WSD9R Universal Converter provides RS-232 to RS-422/RS-485 conversion using either port-power or an external power supply. The 4WSD9TB has a Terminal Block RS-485 connector, and the 4WSD9R has a DB9 Female connector.

Features

• Extend RS-232 data signals up to 1.2 km (4,000 ft.)
•  
• Change RS-232 TD and RD to RS-485 signals
•  
• Automatic Send Data Control
•  
• Baud rates up to 115.2 kbps
•  
• RS-232 Port Power or External 12 V DC Power Jack
•  
• Dipswitch selectable RS-422 or RS-485

Specifications:

These three-stage surge protectors meet IEEE 1000-4-5: 1995 and IEEE C62.41-1991 recognized standards for premium surge protectors. It protects against lightning strikes, power surges, and other types of voltage disturbances with three stages of protection for each supported line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). Three RS-422/485 signals on terminal blocks are supported with a clamping voltage of approximately 6.8 Volts.

Features

• Three stages of protection on every data line: 1) Gas discharge tube, 2) Series resistor, 3) Transient voltage suppressor
• Protected signal ground connection
• Rugged terminal block connections
• Dedicated chassis ground lug

Specifications:

With no setup required, Advantech B+B SmartWorx Unmanaged Industrial Ethernet Switches are cost-effective, best-in-class, UL Certified plug-andplay devices. These switches are designed for use in demanding industrial environments, offering unmatched pe rformance, reliability, and value. Robust IP30 rated metal enclosure is designed to meet challenging industrial applications to provide efficient heat dissipation. 

Models are available in standard 10/100Mbps speed for twisted pair ports and 100Mbps for fiber optic connections (on some models) while supporting full data transmission. The SE205 and SE208 series switches offer store and forward technology, as well as MDI/MDIX auto sensing to ensure connectivity on the copper ports. Status LEDs indica te active link, speed and collision status. 

Power is a 12-48 VDC redundant input design and is secured with a double protection mechanism: Polarity Reverse and Overload Protection. Polarity Reverse prevents damage to the switch in the event of incorrect power wiring. Overload Protection is a resettable fuse that prevents power overloads causing damage to the switch - once normal power is resumed the switch will restart automatically. Power-fail LEDs will activate to notify administrators of a fail ed condition as well as a power fault relay, to provide easy troubleshooting.

Features

• IP30 rated metal enclosure
• Slim design with DIN rail and wall mounting (included)
• 10/100 Mbps auto-negotiation
• Full/half duplex flow control to ensure compatibility with legacy devices
• MDI/MDI-X auto crossover
• Broadcast storm protection
• Store and Frd switching
• Redundant power inputs 12 - 48 VDC (10.8 - 52.8 VDC) with power fail relay
• Wide operating temperature support -40 - 75C (-T models)

Specifications:

Models USOPTL4 and USPTL4 are USB to one port RS-422/485 converters. Supporting 2-wire RS-485 or 4-wire RS-422/485 communications, these devices are great for applications requiring long range or multi-drop capabilities. Both models use pluggable termi nal blocks on the RS-422/485 side. Two LEDs indicate data transmit or receive. Model USOPTL4 includes circuitry with 2000 Volts isolation protection against ground loops and voltage spikes. Both products draw power from the USB port so no power supply is required.
Simply install the drivers supplied on CD ROM and plug the converter into an available USB port on your computer or USB hub. The device show ups as an additional COM port in the Windows Device Manager, and is compatible with Windows applic ations.
No special software is required to control the RS-485 receiver or transmit line driver. The driver is automatically enabled during each byte transmitted in RS-485 mode. The transmitter is always enabled in RS-422 mode. The receiver is tri-state d during each byte transmitted in the echo-off mode. The receiver is always enabled in the echo-on mode. There are 4.7k ohm pull-up/pull-down resistors on the RDA and RDB lines. A termination resistor may be added to R16 if needed.

Applications

Universal Serial Bus (USB) has become the connectivity workhorse of today’s PCs, replacing classic serial ports. But many commercial and industrial devices still use RS-422/485 interfaces. To connect these devices to modern PCs you need robust and reliable conversion solutions. USB ports are becoming more common on commercial and industrial equipment such as point-of-sale peripherals, medical devices, scientific instrumentation, laboratory equipment and other devices or in environments where surges, spikes and ground loops are likely to occur.

Features

• 2000 V RMS optical isolation
• 15KV ESD surge protection
• Adds a COM port to your PC
• LEDs for transmit and receive lines
• USB 1.0, 1.1 and 2.0 compatible (12 Mbps)
• Automatic configuration on Windows 98, ME, 2000, XP, Vista.
•  7 (32/64 bit), 8 (32/64 bit)
• No power supply required (powered from USB bus)

Specifications:

Media converters do more than just convert copper Ethernet signals to fiber. They allow your LAN to be extended beyond the normal 100 meter limit. By using a pair of media converters, LANs can be extended up to 2km with multimode fiber and up to 20km with single-mode fiber. Since your data is traveling via fiber, it’s protected from ground loop problems and electrical interference present along the cable run.
The economical EIS series media converters are stand-alone products that come with a power supply or can be mounted in a 19 inch rack chassis. The optional rack system holds up to 16 of the EIS products and includes one power supply to power installed EIS models via the backplane.

Applications

Extension of LAN distances make it possible to communicate with remotely located Ethernet enabled devices. The application could be as simple as getting data from one end of the warehouse to the other, tying two buildings together, enabling communications on a tank farm, or monitoring a SCADA system at a waste water plant.

Features

• 128K bits buffer memory
•  
• DIP switch configuration for "Link-Fault-Pass-Through" speed
•  
• Duplex mode 10/100Mbps-Full/Half-duplex
•  
• Auto-negotiation, Auto-MDI/MDIX
•  
• Full wire-speed forwarding rate
•  
• Ships with 12 V DC external power supply
•  
• 0C to to +113F)

Specifications:

With no setup required, Advantech B+B SmartWorx Unmanaged Industrial Ethernet Switches are cost-effective, best-in-class, UL Certified plug-andplay devices. These switches are designed for use in demanding industrial environments, offering unmatched pe rformance, reliability, and value. Robust IP30 rated metal enclosure is designed to meet challenging industrial applications to provide efficient heat dissipation. 

Models are available in standard 10/100Mbps speed for twisted pair ports and 100Mbps for fiber optic connections (on some models) while supporting full data transmission. The SE205 and SE208 series switches offer store and forward technology, as well as MDI/MDIX auto sensing to ensure connectivity on the copper ports. Status LEDs indica te active link, speed and collision status. 

Power is a 12-48 VDC redundant input design and is secured with a double protection mechanism: Polarity Reverse and Overload Protection. Polarity Reverse prevents damage to the switch in the event of incorrect power wiring. Overload Protection is a resettable fuse that prevents power overloads causing damage to the switch - once normal power is resumed the switch will restart automatically. Power-fail LEDs will activate to notify administrators of a fail ed condition as well as a power fault relay, to provide easy troubleshooting.

Features

• IP30 rated metal enclosure
• Slim design with DIN rail and wall mounting (included)
• 10/100 Mbps auto-negotiation
• Full/half duplex flow control to ensure compatibility with legacy devices
• MDI/MDI-X auto crossover
• Broadcast storm protection
• Store and Frd switching
• Redundant power inputs 12 - 48 VDC (10.8 - 52.8 VDC) with power fail relay
• Wide operating temperature support -40 - 75C (-T models)

Specifications:

Media conversion is the most cost-effective solution for extending the productive life of legacy wiring plants and equipment while allowing implementation of new technologies. Measuring less than 3.5 inches deep and 2 inches wide, the MiniMc LFPT is one of the industry’s smallest media converters with both data connections on the same side of the unit. An optional fiber SFP port gives network operators the flexibility to upgrade network equipment to different fiber interfaces. Link Fault Pass Through (LFPT) can be enabled/disabled via a DIP Switch on the unit, and is a useful diagnostic feature that assists the network administrator in indicating a fault condition on a given segment between the interfaces.

Applications

Designed and manufactured in the USA, the MiniMc LFPT extends 10 and 100 Mbps twisted pair network segments up to 80 km over fiber. 
Both a media and data rate converter, the MiniMc LFPT features 10/100 Auto Negotiation on the copper port while the fiber port operates at 100 Mbps full duplex. MiniMc LFPT 10/100 switching fiber converters are ideal for all premises, FTTD, LAN-to-LAN or LAN-to-MAN fiber networking applications.
Multiple powering options include a country-specific AC wall adapter or USB-power cord. The unit can also be installed into the IEPowerTray/18-AC which allows for 18 converters in only 1.5U of rack space, DIN Rail mounted, or with a rack mount bracket.

Features

• One 100 Mbps FDX fiber port or 1 SFP fiber port
• One 10/100 Base-TX twisted pair port
• AutoCross automatic selection between crossover or straight-through connection
• Supports Link Fault Pass Through

Specifications:

With no setup required, Advantech B+B SmartWorx Unmanaged Industrial Ethernet Switches are cost-effective, best-in-class, UL Certified plug-andplay devices. These switches are designed for use in demanding industrial environments, offering unmatched pe rformance, reliability, and value. Robust IP30 rated metal enclosure is designed to meet challenging industrial applications to provide efficient heat dissipation. 

Models are available in standard 10/100Mbps speed for twisted pair ports and 100Mbps for fiber optic connections (on some models) while supporting full data transmission. The SE205 and SE208 series switches offer store and forward technology, as well as MDI/MDIX auto sensing to ensure connectivity on the copper ports. Status LEDs indica te active link, speed and collision status. 

Power is a 12-48 VDC redundant input design and is secured with a double protection mechanism: Polarity Reverse and Overload Protection. Polarity Reverse prevents damage to the switch in the event of incorrect power wiring. Overload Protection is a resettable fuse that prevents power overloads causing damage to the switch - once normal power is resumed the switch will restart automatically. Power-fail LEDs will activate to notify administrators of a fail ed condition as well as a power fault relay, to provide easy troubleshooting.

Features

• IP30 rated metal enclosure
• Slim design with DIN rail and wall mounting (included)
• 10/100 Mbps auto-negotiation
• Full/half duplex flow control to ensure compatibility with legacy devices
• MDI/MDI-X auto crossover
• Broadcast storm protection
• Store and Frd switching
• Redundant power inputs 12 - 48 VDC (10.8 - 52.8 VDC) with power fail relay
• Wide operating temperature support -40 - 75C (-T models)

Specifications:

Your network is growing and many new access points, workstations, etc. are required. However, legacy equipment, along with your existing wiring infrastructure, must work with any new equipment you implement in your network. When copper-to-fiber conversions are required, along with advanced troubleshooting features, our MediaConverter Series is the perfect solution.

Applications

MediaConverter Series enables you to easily and cost-effectively connect one type of media to other dissimilar media or networking products. This series increases the functionality and extends the productive life of both your legacy cabling infrastructure and networking equipment when adding fiber to your network.

Features

• Modular, hot-swappable architecture reduces operational costs associated with product installations, upgrades and maintenance
• One 10/100 Mbps twisted pair port with and RJ45 connector
• One 100 Mbps fiber port with ST and SC connectors
• Plug-and-play operati

Specifications:

The 485LDRC9 is an optically isolated RS-232 to RS-422/485 converter. RS-232 signals interface through a DB9 female connector or a terminal block. RS-422/485 signals and power inputs connect to the terminal block. Terminal blocks are arranged to allow easy wiring inside a control panel.

Built-in Automatic Send Data Control circuitry allows quick set-up and eliminates the need for external software drivers to control handshake signals. The converter operates on externally sourced 10-30 V DC power.

Features

• Extend data up to 1.2 km (4,000 ft.)
• 2 kV optical isolation on input/output
• Wide operating temperature (-40 to +80 C)
• Modbus compatible
• UL Recognized, NEMA TS2
• Automatic Send Data Control

Specifications:

Our industrial grade SE300 series switches can be used as plug and play, unmanaged switches right out of the box. Installing the eWorx Utility gives them basic management capabilities, as well. They bridge the gap between unmanaged switches and signifi cantly more expensive, fully managed solutions. When enabled with the eWorx Utility, these switches use Modbus/TCP to communicate with SCADA software and SNMP to communicate with NMS (Networking Management System) at the same time. This gives full read control to both control engineers and IT. They are equipped with port-based QoS for deterministic data transmission. The QoS port has priority over other ports. The eWorx Utility enables IP address assignment, allowing for a static IP address or an ad dress that is discoverable via DHCP.

Features

• Wide temperature range: -40 to 75C
•  
• DIN rail or wall/panel mountable
•  
• Dual 12 to 48 V DC power inputs for redundancy
•  
• Energy Efficient Ethernet (EEE), IEEE 802.3az for low power applications
•  
• EMS Level 3 Protection
•  
• Safety certifications incluss 1 Division 2 and Atex
•  
• Port-based QoS feature for deterministic data transmission
•  
• Loop detection and event alarm
•  
• Power failure indicated by a relay and LED indicator
•  
• Communicates with SCADA software via Modbus/TCP
•  
• Communicates with NMS (ng Management System) via SNMP

Specifications: