:
from
to
FCPS24FS8 FIRE-LITE REMOTE POWER SUPPLY/SIGNAL
SKU: FCPS24FS8
FCPS24FS8 FIRE-LITE REMOTE POWER SUPPLY/SIGNAL. The FCPS-24FS power supplies can be used as remotely mounted power supplies and battery chargers to power four non coded or coded NACs. The Main FACP (Fire Alarm Control Panel) NAC(s) is connected to the remote power supply input circuit(s). When the control input circuit activates due to reverse polarity of the NAC from the FACP, the power supply will activate its Notification Appliance Circuits. During the inactive or non alarm state, the power supply supervises its NAC field wiring for short and open conditions. AC fail, battery, charger and ground fault troubles will also be monitored by the power supply. If an NAC or power supply fault is detected, the power supply Normally-Closed Trouble contact will open. If an alarm condition occurs and the NAC is activated, the supervision is disabled and the Notification Appliance Circuit is no longer supervised (except for shorts). Supervision of other power supply faults such as low battery, AC loss, ground fault and battery charger trouble will continue and may be monitored via the Trouble relay contacts. Self-contained in a lockable cabinet . 24 VDC remote power supply . Outputs are completely power-limited (Class 2) . Two optically-isolated input/control circuits, compatible with 12 VDC and 24 VDC control panel NACs .
- Shipping info
We deliver worldwide
- Payment methods
- Return Policy
We accept returns
- Customer Reviews
Check out our customer Reviews
FCPS24FS8 FIRE-LITE REMOTE POWER SUPPLY/SIGNAL. The FCPS-24FS power supplies can be used as remotely mounted power supplies and battery chargers to power four non coded or coded NACs. The Main FACP (Fire Alarm Control Panel) NAC(s) is connected to the remote power supply input circuit(s). When the control input circuit activates due to reverse polarity of the NAC from the FACP, the power supply will activate its Notification Appliance Circuits. During the inactive or non alarm state, the power supply supervises its NAC field wiring for short and open conditions. AC fail, battery, charger and ground fault troubles will also be monitored by the power supply. If an NAC or power supply fault is detected, the power supply Normally-Closed Trouble contact will open. If an alarm condition occurs and the NAC is activated, the supervision is disabled and the Notification Appliance Circuit is no longer supervised (except for shorts). Supervision of other power supply faults such as low battery, AC loss, ground fault and battery charger trouble will continue and may be monitored via the Trouble relay contacts. Self-contained in a lockable cabinet . 24 VDC remote power supply . Outputs are completely power-limited (Class 2) . Two optically-isolated input/control circuits, compatible with 12 VDC and 24 VDC control panel NACs . Four output circuits: – Fully filtered power – Four 24 VDC Style Y (Class B) NACs – Optional ZNAC-4 Class A converter module for conversion to Style Z (Class A) NACs – Alternatively, all four circuits may be configured as 24 VDC special application power outputs – Output circuits may be configured as resettable or non resettable. NAC Trouble LED - blinks to indicate the number of the circuit in trouble. Maximum current available for any one output circuit: 3.0 amps special application, 300mA regulated . Maximum total continuous current available: – 4.0 amps for FCPS-24FS6 – 6.0 amps for FCPS-. Maximum total short term current (one hour maximum): – 6.0 amps for FCPS-24FS6 – 8.0 amps for FCPS-24FS8 . Integral supervised battery charger for lead acid batteries only . Capable of charging 7.0 AH to 18.0 AH (Amp Hour) batteries .Fully supervised power supply, battery and NACs . Selectable Strobe Synchronization for NACs (System Sensor, Centex and Wheelock). Coded signal synchronization . Fixed terminal blocks for field wiring capable of accepting 12 - 22 AWG wire . Selectable Ground Fault detection by jumper JP1. Power supply trouble Form-C relay contacts (fail-safe) . Optional delay of AC loss reporting for 2 hours . Auxiliary Special Application Power Output for SLC modules (500 m A maximum) with optional reset for 4-wire smoke detectors .Mounting location for optional addressable control module
The mission of WorldEyeCam, Inc.is to provide consumers with the most up to date security products at the best prices available on the market today. As security is advancing at such a rapid rate we try to exceed our customers expectations by providing unparallel customers service and technical support. We strive to stay on the forefront of the most up to date products and news in regards to our industry. Our website www.Worldeyecam.com contains a broad spectrum of surveillance products as well as industry information. Our website is updated daily as we make our way through this technological wave of security products. Our goal and focus is to stay on top of the latest innovations in technology and securities and to remain a trusted industry leader for years to come.
WorldEyeCam is a CCTV products distribution and integration company located in Southern California in the heart of Orange County. We operate out of a 14,000 sq.ft warehouse & a separate product demo show room. We proudly offer 1st class technical support for our customers we serve with the complete understanding that it is you, the customer that matters to every successful business. If you haven't already learned the hard way, you will understand that it takes more than just a website and the ability to sell a product - anyone can sell a product! But, it takes commitment to offerDEPENDABLE AND CONSISTENT technical support & customer SERVICE AFTER THE SALE. We stand behind our products 100% and we are in it for the long haul & to keep you, the customer happy.
Why Buy From The Worldeyecam Security Store. 30 Day Money Back Guarantee Latest Product Version Guarantee Fast Accurate Same Day Shipping Friendly customer service.
We are committed to providing our customers with "Complete Purchasing Experience Satisfaction" This means quality customer service from pre-purchase support, easy secure encrypted ordering, fast UPS shipping , comprehensive after sales tech-support by certified professionals and hassle free returns.
Shipping Information
FREE UPS Ground Shipping Continental US addresses on all orders over $1000.00 All in stock items are usually shipped Same Day (*not including weekends and holidays). For any Order for Bulk Cables that weigh over 75 lbs will be charged extra. Orders placed before 3 pm PST, or 2 pm for Expedited orders (Next Business Day Air or 2nd Business Day Air) can usually be shipped the same day. Orders placed by internet or by phone receive the same priority handling.
EZ - Hassle FREE - Returns
WorldEyeCam provides a 15-30-day money back guarantee on all products and services purchased, except special order items and all international orders. If for any reason you are not satisfied with your purchase, simply notify us by using this form here:
Submit RMA Return Form *Click Here* and we will immediately issue a Return Material Authorization Number.
