:
from
to
D8P Auxiliary PTX Output
SKU: D8P-BOXED1
Standard Features
One single switch for configuring the output between 12 and 24VDC eliminates field errors and allows for the reduction and simplification of service inventory by eliminating the necessity of stocking units in each voltage.
Power supply and accessory board interconnection system uses common mounting footprints, predrilled mounting holes, snap-in standoffs, pluggable wires, and a dual buss distribution architecture to simplify installation and service.
FPO power supplies are fully fault protected and feature fiberglass printed circuit boards to protect the electronics from water and other corrosive elements found in industrial settings. High efficiency design promotes low heat generation leading to longer service life.
FlexPower systems are RoHs compliant, lead-free, and meet the latest state, federal and European requirements for energy efficiency.
Intelligent battery charging and battery state monitoring improve battery performance. Install hours are tracked and reported for optimum service life.
This module is typically part of an existing system or purchased to expand an existing system.
This module may also be used to add lock control features to an existing system that currently does not feature these functions.
This module may be added to any existing FlexPower system without restrictive agency listing issues.
D8P Module Programming
Each output may be programmed for the following modes:
- Voltage output from power supply one when used in a single or dual voltage system
- Lock power with fire alarm interface (FAI), when used in a single voltage system. The host power supply determines whether the output is fail-safe or fail-secure
- Voltage output from power supply two when used in a dual voltage system
FlexConnect® Dual Buss Architecture
Each output may be individually programmed via jumper setting
Ordering Information:
| MFG Part # | BluBØX Order # | Description |
|---|---|---|
| D8 | 670-1720 | LSP Power Supply FPO150 12A/12V or 6A/24V 150W 80Ah |
| Mechanical Information | Size: 4” x 2.5” x 1.5” Weight: .25 lb. | |
| D8P | 670-1730 | LSP DC Power Distributor D8P 8 Zone 2.5A PL |
| Mechanical Information | Size: 4” x 2.5” x 1.5” Weight: .25 lb. | |
- Shipping info
We deliver worldwide
- Payment methods
- Return Policy
We accept returns
- Customer Reviews
Check out our customer Reviews
Standard Features
One single switch for configuring the output between 12 and 24VDC eliminates field errors and allows for the reduction and simplification of service inventory by eliminating the necessity of stocking units in each voltage.
Power supply and accessory board interconnection system uses common mounting footprints, predrilled mounting holes, snap-in standoffs, pluggable wires, and a dual buss distribution architecture to simplify installation and service.
FPO power supplies are fully fault protected and feature fiberglass printed circuit boards to protect the electronics from water and other corrosive elements found in industrial settings. High efficiency design promotes low heat generation leading to longer service life.
FlexPower systems are RoHs compliant, lead-free, and meet the latest state, federal and European requirements for energy efficiency.
Intelligent battery charging and battery state monitoring improve battery performance. Install hours are tracked and reported for optimum service life.
This module is typically part of an existing system or purchased to expand an existing system.
This module may also be used to add lock control features to an existing system that currently does not feature these functions.
This module may be added to any existing FlexPower system without restrictive agency listing issues.
D8P Module Programming
Each output may be programmed for the following modes:
- Voltage output from power supply one when used in a single or dual voltage system
- Lock power with fire alarm interface (FAI), when used in a single voltage system. The host power supply determines whether the output is fail-safe or fail-secure
- Voltage output from power supply two when used in a dual voltage system
FlexConnect® Dual Buss Architecture
Each output may be individually programmed via jumper setting
Ordering Information:
| MFG Part # | BluBØX Order # | Description |
|---|---|---|
| D8 | 670-1720 | LSP Power Supply FPO150 12A/12V or 6A/24V 150W 80Ah |
| Mechanical Information | Size: 4” x 2.5” x 1.5” Weight: .25 lb. | |
| D8P | 670-1730 | LSP DC Power Distributor D8P 8 Zone 2.5A PL |
| Mechanical Information | Size: 4” x 2.5” x 1.5” Weight: .25 lb. | |
The mission of WorldEyeCam, Inc.is to provide consumers with the most up to date security products at the best prices available on the market today. As security is advancing at such a rapid rate we try to exceed our customers expectations by providing unparallel customers service and technical support. We strive to stay on the forefront of the most up to date products and news in regards to our industry. Our website www.Worldeyecam.com contains a broad spectrum of surveillance products as well as industry information. Our website is updated daily as we make our way through this technological wave of security products. Our goal and focus is to stay on top of the latest innovations in technology and securities and to remain a trusted industry leader for years to come.
WorldEyeCam is a CCTV products distribution and integration company located in Southern California in the heart of Orange County. We operate out of a 14,000 sq.ft warehouse & a separate product demo show room. We proudly offer 1st class technical support for our customers we serve with the complete understanding that it is you, the customer that matters to every successful business. If you haven't already learned the hard way, you will understand that it takes more than just a website and the ability to sell a product - anyone can sell a product! But, it takes commitment to offerDEPENDABLE AND CONSISTENT technical support & customer SERVICE AFTER THE SALE. We stand behind our products 100% and we are in it for the long haul & to keep you, the customer happy.
Why Buy From The Worldeyecam Security Store. 30 Day Money Back Guarantee Latest Product Version Guarantee Fast Accurate Same Day Shipping Friendly customer service.
We are committed to providing our customers with "Complete Purchasing Experience Satisfaction" This means quality customer service from pre-purchase support, easy secure encrypted ordering, fast UPS shipping , comprehensive after sales tech-support by certified professionals and hassle free returns.
Shipping Information
FREE UPS Ground Shipping Continental US addresses on all orders over $1000.00 All in stock items are usually shipped Same Day (*not including weekends and holidays). For any Order for Bulk Cables that weigh over 75 lbs will be charged extra. Orders placed before 3 pm PST, or 2 pm for Expedited orders (Next Business Day Air or 2nd Business Day Air) can usually be shipped the same day. Orders placed by internet or by phone receive the same priority handling.
EZ - Hassle FREE - Returns
WorldEyeCam provides a 15-30-day money back guarantee on all products and services purchased, except special order items and all international orders. If for any reason you are not satisfied with your purchase, simply notify us by using this form here:
Submit RMA Return Form *Click Here* and we will immediately issue a Return Material Authorization Number.
