Availability of H/W default buttons of GV-IP camera - 20211207


:
from
to
Clear all
The most of GV-IP cameras have default buttons on their H/W (hardware), while some of GV-A, T and EBD series don’t have.
Hence, we’ve listed out the availability of H/W default buttons, especially for GV-A, T and EBD series.

If the GV-IP camera is unreachable on the network and it happens not having a H/W default button,
please contact your reseller or dedicated GV-Sales Representatives for warranty and RMA.
110-12-07_10h22_15.jpg

110-12-07_10h22_15.jpg (174.62 KiB) Viewed 967 times

For the specified location of H/W default buttons,
please refer to the dedicated IP Camera Quick Start Guide, available on official Geovision Download Page.

Below is the instruction to work on the default buttons,
1. Keep the power and network cables (or PoE) connected to the camera.
2. Press and hold the default button.
2.1. For the most of GV-IP cameras, release the default button when the status LED blinks. This shall take about 15 seconds.
2.2. For GV-A, T and EBD series, release the default button when the IR LED shines.
2.2.1. If the default button doesn’t respond after pressing for 15 seconds, reboot the camera and try again within 10 minutes.
3. When the status LED fades, the process of loading default settings is completed and the camera reboots automatically.
Top