3MP 1080P @ 20fps - 2MP 1080P @ 30fps IP IR Dome Camera


$139.00


Availability: In Stock
Ships Same Day
List Price: $315.00
SKU: WEC-IP8
Product #: 85768
Manufacturer: iMaxCamPro
UPC: 881314695157

Remote Login Support:
Quantity

This IP surveillance camera records up to 30 frames per second with a 1080p resolution. It has infrared LEDs that allow it to continue recording even in total darkness. The security camera is also equipped with a 2.8mm fixed lens, infrared cut filter and digital noise reduction. It is weatherproof and approved for both indoor and outdoor use. Footage is recorded to an NVR and can be viewed remotely from a PC or mobile device.


  • 1/3” 3Megapixel progressive scan CMOS
  • H.264 & MJPEG dual-stream encoding
  • Max 20fps @ 3M(2048×1536) & 25/30fps@1080P(1920×1080)
  • DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC
  • Multiple network monitoring: Web viewer, CMS(DSS/PSS) & IMaxCam
  • 2.8mm fixed lens (2.8mm,6mm optional)
  • Max. IR LEDs Length 98 ft. / 30m
  • IP67, PoE

 

(CLICK HERE ) To view full size image.

 

 

(CLICK HERE ) To view full size image.

 

SPECIFICATIONS
Model WEC-IP8
Image Sensor 1/3” 3Megapixel progressive scan CMOS
Effective Pixels 2048(H) x 1536(V)
Scanning System Progressive
Electronic Shutter Speed Auto/Manual, 1/3s ~ 1/30000s
Min. Illumination 0. 045Lux/F2.1(Color), 0Lux/F2.1(IR on)
S/N Ratio More than 50dB
Video Output N/A
Camera Features
Max. IR LEDs Length 98 ft / 30m
Day/Night Auto(ICR)/ Color/ B/W
Backlight Compensation BLC / HLC / DWDR
White Balance Auto/Manual
Gain Control Auto/Manual
Noise Reduction 3D
Privacy Masking Up to 4 areas
Lens
Focal Length 2.8mm
Max Aperture F2.1
Focus Control Manual
Angle of View H:81°
Lens Type Fixed lens
Mount Type Board-in Type
Video
Compression H.264/ H.264H/ H.264B/ MJPEG
Resolution 3M (2048×1536) / 3M (2304×1296) / 1080P (1920×1080) / 720P (1280×720) / D1 (704×576 / 704×480) /CIF (352×288 / 352×240)
Frame Rate Main Stream 3M(1 ~ 20fps)/1080P(1 ~ 25/30fps)
Frame Rate Sub Stream D1(1 ~ 25/30fps)
Bit Rate H.264: 4Kbps ~ 8192Kbps
Corridor Mode Support
Audio
Compression N/A
Interface N/A
Network
Ethernet RJ-45 (10/100Base-T)
Wi-Fi N/A
Protocol IPv4/IPv6, HTTP, HTTPS, TCP/IP, UDP, UPnP, ICMP, IGMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS
Compatibility ONVIF, CGI
Max. User Access 20 users
Smart Phone iPhone, iPad, Android, Windows Phone
Auxiliary Interface
Memory Slot N/A
RS485 N/A
Alarm N/A
PIR Sensor Range N/A
General
Power Supply DC12V, PoE (802.3af)
Power Consumption <3.7W(IR on)
Working Environment -22°F ~ +140°F, Less than 95% RH
Ingress Protection IP67
Vandal Resistance N/A
Dimensions Φ4.25" x 3.31"
Weight 0.55 lbs

Average Customer Rating:


1 Most useful customer reviews
Chris Moore
Nov 6, 2015
This customer purchased the item at our site.
For someone who runs a jewelry store, this security camera is everything I needed. Perfect quality of footage as well as pictures and very affordable! The discount does this product a lot of justice and it is portable, small. To be honest I splurged a little and bought two of these security cams and did not regret it one bit. Sometimes when I leave the work to my employers and relax at the back of my store I reassure my doubts and worries by pulling out my phone and checking up on both of the camera footages.

Sometimes it feels like I am sitting outside tending to the front desk while watching all the activity from my little phone’s screen. I would recommend this item 100% to all small shop owners who need affordability and quality in one security camera. By the way the quality is never negotiated even if you switch to the 30 frames per second mode because you have 1080 pixels that are crystal clear.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}