3 Megapixel IP Bullet Camera 2.8-12mm Motorized Zoom Lens IP66 90ft. Night Vision


$325.00


Availability: In Stock
Ships Same Day
List Price: $629.00
SKU: WEC-IP15
Product #: 85776
Manufacturer:
UPC: 683405210351

Remote Login Support:
Quantity

This bullet surveillance camera records 3mp resolution footage at 20 frames per second. It has a 2.8-12mm varifocal lens and infrared LEDs for recording over 90 feet away in total darkness. The security camera also comes equipped with Wide Dynamic Range and digital noise reduction. It meets IP66 standards and can be used outdoors. Footage is recorded to an NVR and can be monitored remotely via computer or mobile device.

Features

  • 1/3” 3 Megapixel progressive scan CMOS
  • H.264 & MJPEG Dual Stream
  • Max 20fps @ 3M(2048 × 1536), 25/30fps @ 1080P(1920 × 1080)
  • DWDR, Day/Night(ICR), 3DNR,AWB,AGC,BLC
  • Multiple network monitoring: Web viewer, SmartPSS, iMaxCam
  • 2.7~12mm varifocal lens
  • Max. IR LEDs Length 98 ft. / 30m
  • IP66, PoE


  • (CLICK HERE) To View a full 3 Megapixel image

    (CLICK HERE) To View a full 3 Megapixel image

    Specifications
    Model WEC-IP15
    Image Sensor 1/3" 3 Megapixel progressive scan CMOS
    Effective Pixels 2048 (H) x 1536 (V)
    Scanning System Progressive
    Electronic Shutter Speed Auto / Manual; 1/3(4) - 10,000s
    Min. Illumination 0. 01Lux/F1.4 (Color), 0Lux/F1.4(IR on)
    S/N Ratio More than 50dB
    Video Output N/A
    Camera Features
    Max IR LED Distance 98 ft. / 30m
    Day/Night Auto(ICR) / Color / B/W
    Backlight Compensation BLC / HLC / DWDR
    White Balance Auto / Manual
    Gain Control Auto / Manual
    Noise Reduction 3D
    Privacy Masking Up to 4 areas
    Lens
    Focal Length 2.7mm ~ 12mm
    Max Aperture F1.4/td>
    Focus Control Manual
    Angle of View Horizontal: 92° - 28°
    Lens Type Motorized/ Fixed Iris
    Mount Type Board-in Type
    Video
    Compression H.264/ H.264H/ MJPEG
    Image Resolution 3M (2048 × 1536) / 1080P (1920 × 1080) / 720P (1280 × 720) / D1(704 × 576) / CIF(352 × 288)
    Frame Rate Main Stream 3MP @ 20fps; 1080p / 1.3MP / 720p @ 30fps
    Extra Stream D1/CIF (1 ~ 25/30fps)
    Bit Rate H.264H: 40K ~ 8192Kbps; MJPEG: 40K~16384Kbps
    Audio
    Compression N/A
    Interface N/A
    Network
    Network Interface RJ-45 (10/100M)
    Wi-Fi N/A
    Protocol IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, Bonjour
    ONVIF Compliance ONVIF,PSIA,CGI
    Max. User Access 20 users
    Smart Phone iPhone, iPad, Android, Windows Phone
    Auxiliary Interface
    Memory Slot N/A
    RS485 N/A
    Alarm N/A
    PIR Sensor Range N/A
    General
    Power Supply DC12V, PoE (802.3af)
    Power Consumption Max 8.5W
    Working Environment -22°F ~ +140°F (-30°C ~ +60°C), < 95%RH
    Ingress Protection IP66
    Vandal Resistance N/A
    Dimensions 2.83"(72mm) x 3.15" (80mm) x 8.38" (212.8mm)
    Weight 1.43 lbs

    There have been no reviews

    Mobile APPs


    QR Code Scan P2P iPhone Android iOS instructions

    How to enable remote viewing without Port-Forwarding

    We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


    Easy remote Viewing
    P2P/QR Code Easy Setup


    To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


    You must check the box to enable P2P function and then click Apply to save at bottom of screen.
     

     

    Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

     

    Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

     

     

    How to setup the iPhone app with the P2P/QR Code

    Step 1: Open the iMaxCam app and tap on Camera.

    Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

    Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

    Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

    Step 5: In the add device screen, select P2P

    Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

    Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

    Name: DVR

    S/N: Tap on the icon to scan the QR Code

    User Name: admin (default)

    Password: admin (default)

    Step 7: Press the “Start Live Preview” button to start watching the cameras.

    Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
    *}