2 Megapixel Full HD Varifocal 3-12mm, Vandal-proof IR Network Dome Camera


$379.00


Availability: Out of Stock
Ships Same Day
List Price: $789.22
SKU: WEC-2IPVD108VF
Product #: 82408
Manufacturer:
UPC: 881314694525

Remote Login Support:
Quantity

This 2 megapixel dome surveillance camera can capture up to 30 frames per second at a 1080p resolution. It has a 3-12mm varifocal lens for zoom and focus. The security camera comes equipped with Digital Wide Dynamic Range, 2D Noise Reduction and ICR. Built-in IR LEDs enable the surveillance camera to record up to 65 feet in darkness. It has a 12V DC/24V AC dual power supply as well as PoE. A Micro SD card allows for 32GB of local storage.

 

FEATURES:

  • 1/2.8” 2.0 Megapixel SONY progressive scan Exmor CMOS image sensor
  • High-performance TI DaVinci series DSP
  • H.264 video compression and JPEG image capture
  • 25/30fps@1080P(1920×1080)
  • Dual encoding streams supported
  • DWDR, Day/Night(ICR), 2DNR, Auto iris, AWB, AGC, BLC
  • Support ICR true Day/Night
  • 3~12mm varifocal lens
  • Built-in high-performance IR LEDs(10~20m)
  • Support Alarm I/O, RS485 interface
  • Support up to 32GB Micro SD card for local storage
  • Support DC12V/AC24V dual power supply, POE
  • ONVIF 2.1
  • Built-in web server, NVR, iMaxCam & CMS
This IP Camera records directly to ALL of our iMaxCamPro NVR systems.
http://worldeyecam.com/skin1/images/kits/iMaxCamPro_NVR_PSS.jpg
View on PC or Mac via PSS Software
http://worldeyecam.com/skin1/images/kits/iMaxCamPro_NVR_Web.jpg
View on PC via Internet Explorer
   

 

Model

WEC-2IPVD108VF

General

Processor

TiDavinci

Operating System

Embedded LINUX

Resource

Simultaneous remote monitoring, local recording and remote control

User Interface

WEB, CMS(DSS, PSS)

Camera

Image Sensor

1/2.8” 3.0 Megapixel SONY progressive scan Exmor CMOS

Effective Pixels

1920 (H) x 1080 (V)

Electronic Shutter

Auto/Manual, 1/3~1/10000s

 

Mini. Illumination

Color: 0. 2Lux/F1.2, B/W: 0.01Lux/F1.2; 0Lux/F1.2(IR on)

Signal Noise Ratio

>50dB

Gain Control

Auto/Manual

White Balance

Auto

Day/Night

ICR

Lens

Auto Iris, 3-12mm

IR LEDs

~20 meters

Video

Video Compression

H.264/JPEG

Image Resolution

1080P(1920×1080) / 720P(1280×720) / D1(704×480) / CIF(352×240) / VGA(640×480)

Encoding Speed

Main Stream: 3.0M(1~15fps),

1080P/720P/ D1/CIF/ VGA(1~30fps)

Extra Stream: D1/CIF (1~30fps)

Bit Rate

160K~8Mbps

Snapshot

Fastest 1fps JPEG capture

Video Format

NTSC

Analogue Video Output

1 channel BNC(1.0Vp-p, 75?)

Audio

Audio Compression

G.711a / G.711u / PCM

Bit Rate

64kbps/128kbps

Input

1 channel RCA

Output

1 channel RCA

Network

Ethernet

RJ-45 (10/100Base-T)

Network Functions

HTTP, TCP/IP, ICMP, RTSP, RTP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPOE, IP Filter, PPPOE, DDNS, FTP, Alarm Server

Remote Operation

Monitor, Playback, System setting, File download, Log information, Maintenance & Upgrade

Auxiliary Interface

MicroSD Card

Max 32GB, local storage

RS485

PTZ control

Alarm

2 Input / 1 Output

Environmental

Power Supply

DC12V/AC24V, PoE(802.3af)

Power Consumption

<10W

Ingress Protection

IK10 & IP66

Operating Environment

-10°C~+60°C, 10%~90%

Dimension

¦160mm×118.5mm

Weight

2.7 lb approx.


There have been no reviews

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}