24551 Raymond Way, Suite 270, Lake Forest, CALIFORNIA, 92630, United States
firstname.lastname@example.org 949-305-6550 888-211-2288 949-305-9977
Port Forwarding using a SMC router|
for Bronze, Gold, and Platinum iMaxCamPro DVR's
Back to Remote Access Guides | iMaxCamPro Support | Support Home
Configuring the DVR to pick up an IP address
Power Cycle the DVR
Identifying the IP address
Right Click and select Main Menu
To setup port forwarding on this router your computer needs to have a static ip address.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
You should see a box prompting you for your password. Enter your password now. By default your password is smcadmin. Click the Login button to log in to your router.
Click the NAT button near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. iMaxCamPro DVR requires you to forward the 80,37777,37778 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
When you're finished, click Save Settings near the bottom of the screen to save your changes.
To test if your port has been properly forwarded, you can use our Port Checker tool.