24551 Raymond Way, Suite 270, Lake Forest, CALIFORNIA, 92630, United States
firstname.lastname@example.org 949-305-6550 888-211-2288 949-305-9977
You can adjust the setup according to your mobile phone performance and network environment. You can lower the frame rate to guarantee fluent video if the network is not so good.
For mobile phone account, please make sure it is reusable (support multiple users using the same account to login at the same time) and has PTZ control right.
Then, when other uses are monitor commonly, you can use mobile phone to monitor and realize PTZ control operation.
Mobile Phone Software
In the mobile phone, from Start to the Program, you can see the software shortcut menu. Its icon is (DMSS). See Figure 3-3.
Click DMSS button, you can see an interface is shown as in Figure 3-4.
In Figure 3-4, please input server IP, server port, user name and password. Click login button, you can see the following interface. See Figure 3-5.
Mobile phone monitor software can remember the recent login device information, so that you can login conveniently the next time.
Please refer to the following figure for mobile phone information. See Figure 3-6.
Please refer to the following sheet for detail information.
Please use the navigation button to select the channel first and then click the left button, you can see an interface is shown as in Figure 3-7.
If you want to switch to another channel, please use the navigation button to select the camera item, then click navigation button to go back to Figure 3-5.
Use the navigation button to select the PTZ item and then click the navigation button; you can see the following interface. See Figure 3-8.
Use the navigation button to select the operation button you desire and then click the navigation button again; you can realize the corresponding function.
In the full-screen mode, you can use the navigation button directly to control the PTZ direction.
Click Right button, you can see the following interface. See Figure 3-9. Use the navigation button to select the Yes button; you can exit the mobile phone monitor software. Figure 3-9
Appendix Software Registration
Please follow the steps listed below to register the application program First, you need to get your cell phone ID. That is to say, you need to click *#06# to get the IMEI (International Mobile Equipment Identity). The IMEI usually consists of a 15-digit number.
Then, please go to the following website https://www.symbiansigned.com/app/page/public/openSignedOnline.do
You can see an interface is shwon as in Figure 4-1.
Please input yout cell phone IMEI abd email. Then you can upload your software for registration.
After you received the registration email, you can download the registration software. Finally, you can install the software to your cell phone and then use it.
Slight difference may be found in user interface. All the designs and software here are subject to change without prior written notice. Please visit our website for more information.