iMaxCamPro 5MP C/CS Lens Mount Security IP Box Camera


$434.00


Availability: Out of Stock
Ships Same Day
List Price: $499.00
SKU: WEC-ABX50TI
Product #: 85324
Manufacturer:
UPC: 683405210443

Lens:
Outdoor Housing:
Remote Login Support:
Quantity

This security camera offers high quality video at 5 megapixels and a 1080p resolution. It has digital Wide Dynamic Range and can record both day and night. The surveillance camera comes with an SD card with 64GB of local storage. It has dual-voltage with 12V-DC and 24V-AC as well as PoE. Footage can be accessed remotely from a web browser or smart phone with the iMaxCamPro mobile app.

 

 

  • 1/2.5” 5MP Progressive Scan Aptina CMOS Image Sensor
  • High-performance TiDavinci DSP
  • H.264 / MJPEG Dual-Stream Encoding
  • 5MP @ (1 ~ 8fps), 3MP @ (1 ~ 15fps), 1080p / 720p (1 ~ 30fps)
  • Supports C/CS Auto Iris Lens (LENS NOT INCLUDED)
  • AWB, AGC, 2DNR, BLC, HLC, DWDR
  • SD Card 64GB Local Storage
  • Dual-Voltage DC12V / AC24V, POE (802.3af)
  • Access via Web Browser, CMS (PSS) & SmartPhone (iMaxCam mobile app)
  • ONVIF Profile S

WEC-ABX50TI

Security IP-Camera

General

 

Sensor Type

1/2.5” 5 Megapixel Progressive Scan Aptina Image Sensor

Digital Signal Processor

Ti Davinci

Effective Pixels

1920 (H) x 1080 (V)

Scanning System

Progressive

Electronic Shutter Speed

Auto / Manual, 1/3(4) ~ 1/10,000s

Lens

C/CS Lens Mount (**LENS NOT INCLUDED**)

Field of View

N/A

Minimum Illumination

0.6Lux / F1.2 (Color); 0.08Lux / F1.2 (B&W)

S/N Ratio

> 50dB

Max IR LED Distance

N/A

Day / Night

Auto (ICR) / Color / B&W

Backlight Compensation

BLC / HLC / DWDR (Digital WDR)

White Balance

Auto

Gain Control

Auto / Manual

Noise Reduction

2DNR

Privacy Masking

Up to 4 areas

Local Storage

SD, Max 64GB

Alarm Input / Output

1 / 1 Channel Input / Output

Image Resolution

5M (2560 x 1920) / 3M (2048 x 1536) / 1080p (1920 x 1080) / 720p (1280 x 720) / D1 (704 x 480) / CIF (352 x 240)

Frame Rate: Main Stream

5M (1 ~ 8fps), 3M (1 ~ 15fps), 1080p / 720p / D1 (1 ~ 30fps)

Frame Rate: Extra Stream

D1 / CIF (1 ~ 30fps)

Bit Rate

32 ~ 8192Kbps

Compression

H.264 / MJPEG

Audio Interface

1 / 1 Channel Input / Output

Audio Compression

G.711a / G.711u / PCM

Network

 

Network Interface

RJ-45 (10/100m)

Network Functions

Pv4 / IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPoE, DDNS, FTP, IP Filter, QoS, Bonjour

ONVIF Compliance

ONVIF Profile S

Max. User Access

10 users

Electrical

 

Power Requirements

DC12V / AC24V; PoE(802.3af)

Power Consumption

< 6W

Environmental

 

Operating Temperature

-10°C ~ +60°C

Operating Humidity

90% RH Max.

Ingress Protection

N/A

Physical

 

Dimensions

70mm × 63.2mm x 149.5mm

Weight

0.9 lbs approx.


There have been no reviews

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}