720p HD-CVI PTZ Dome Camera


$1,475.50


Availability: In Stock
Ships Same Day
SKU: IMAX-CVI20XIR-PTZ
Product #: 84700
Manufacturer:

Remote Login Support:
Quantity

This surveillance camera comes with infrared technology, allowing it to record up to 328 feet away in total darkness. It has 255 presets for pan/tilt/zoom and 20x optical zoom. The security camera records 30 frames per second with a 1.3 megapixel resolution and can be used indoors and outdoors.

 

 

Product Features

  • 20x optical zoom
  • Max 50/60fps@720P resolution
  • DWDR, Day/Night(ICR), Ultra DNR, Auto iris, Auto focus
  • Control over coaxial cable, long distance real-time transmission
  • HD and SD switchable
  • Max 240°/s pan speed, 360° endless pan rotation
  • Up to 255 presets, 5 auto scan, 8 tour, 5 pattern
  • Built-in 2/1 alarm in/out
  • Support intelligent 3D positioning with IMaxCam series
  • IR Distance up to 100m (328.084 feet)
  • IP66 rated, OSD

 

SPECIFICATIONs

 

Sensor Type

1/3” Exmor CMOS

Module Type

20X Optical Zoom Module (4.7mm ~ 94mm)

Effective Pixels

1280 (H) x 960 (V)

Scanning System

Progressive

Resolution

1.3M @ 1 ~ 30fps, 720p @ 1 ~ 60fps

Video Output

1-channel BNC HDVI high definition video output

S/N Ration

>50dB

Gain Control

Auto / Manual

Electronic Shutter Speed

Auto / Manual

White Balance

Auto, ATW, Indoor, Outdoor, Manual

Zoom

20x Optical, 16x Digital

Signal Processing

Digital Signal Processing (DSP)

Minimum Illumination

Color: 0.05Lux@F1.4, B/W: 0.005Lux@F1.4

Audio Compression

G.711a / G.711u

Audio Interface

1 / 1 channel In / Out

IR LEDs

2 Wide Angle & 4 Tele-Photo LEDs

IR Illumination Distance

Up to 100m

Speed Dome

 

Presets

255 (PELCO protocol), 80 (DH-SD protocol)

Auto Tour

8

Auto Pattern

5

Pan Speed

0.1° - 160° / second

Pan Range

0° - 360° continuous

Tilt Speed

0° - 120° / second

Tilt Range

-15° - 90° / Auto flip 180°

Alarm I/O

N/A

Preset Speed

Pan 240° / second, Tilt 300° / second

Intelligent Positioning

Yes, with DH-SD protocol

Idle Motion

Activate preset / pan / scan / tour / pattern

Control

HD-CVI / RS-485

Protocol

DH-SD, PELCO-D/P

Baud Rate

1200/2400/4800/9600 bps

Electrical

 

Power Requirements

AC 24V/2.2A

Power Consumption

26W (IR on, Heater on)

Environmental

 

Operating Temperature

-40° to 140° F

Operating Humidity

0-90% (No condensation)

Ingress Protection

IP66

PTZ Weight

10lbs

Wall Mount Weight

3lbs

Shipping Weight

16lbs

 


There have been no reviews

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}