IMAX-CVI20X-PTZ 1080P 20x Optical Zoom HD-CVI PTZ Dome Camera


Availability: In Stock
Ships Same Day
Product #: 85682
UPC: 683405211068

Remote Login Support:

This pan/tilt/zoom surveillance camera comes with 20x optical zoom 255 presets for the pan/tilt/zoom functions. It records up to 30 frames per second with a 1080p resolution and has infrared technology for day/night recording. The security camera also comes equipped with auto focus and Wide Dynamic Range.



  • 2.0 Megapixel HD-CVI PTZ Dome Camera
  • 20x Optical Zoom, 16x Digital Zoom
  • Advanced OSD & 3D Positioning
  • Audio In & Out, Wall-Mount Included
  • 20X Optical Zoom HDCVI PTZ Camera,
  • 1080p Resolution
  •  PTZ Control Over Coaxial Cable
  •  HD-CVI High Def 500 meter Transmission Distance
  • DWDR
  • Day/Night(ICR) Ultra DNR Auto Iris
  • Auto focus
  • Max 240°/s pan speed
  • 360° endless pan rotation
  • Up to 255 presets
  • 5 auto scan
  • 8 tour
  • 5 pattern
  • 2/1 Alarm In/Out (NO RS485 WIRING NECESSARY)




Sensor Type

1/3” Exmor CMOS

Module Type

20X Optical Zoom Module (4.7mm ~ 94mm)

Effective Pixels

1280 (H) x 1080 (V)

Scanning System



1080 @ 1 ~ 30fps, 720p @ 1 ~ 60fps

Video Output

1-channel BNC HDVI high definition video output

S/N Ration


Gain Control

Auto / Manual

Electronic Shutter Speed

Auto / Manual

White Balance

Auto, ATW, Indoor, Outdoor, Manual


20x Optical, 16x Digital

Signal Processing

Digital Signal Processing (DSP)

Minimum Illumination

Color: 0.05Lux@F1.4, B/W: 0.005Lux@F1.4

Audio Compression

G.711a / G.711u

Audio Interface

1 / 1 channel In / Out

Speed Dome



255 (PELCO protocol), 80 (DH-SD protocol)

Auto Tour


Auto Pattern


Pan Speed

0.1° - 300° / second

Pan Range

0° - 360° continuous

Tilt Speed

0° - 250° / second

Tilt Range

-2° - 90° / Auto flip 180°

Alarm I/O


Preset Speed

Pan 400° / second, Tilt 300° / second

Intelligent Positioning

Yes, with DH-SD protocol

Idle Motion

Activate preset / pan / scan / tour / pattern


HD-CVI / RS-485



Baud Rate

1200/2400/4800/9600 bps



Power Requirements

AC 24V/2.2A

Power Consumption

21W (Heater on)



Operating Temperature

-40° to 140° F

Operating Humidity

0-90% (No condensation)

Ingress Protection


PTZ Weight


Wall Mount Weight


Shipping Weight



There have been no reviews

Mobile APPs

QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.

Easy remote Viewing
P2P/QR Code Easy Setup

To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.

You must check the box to enable P2P function and then click Apply to save at bottom of screen.


Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.


Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.



How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.