How To Set Up EZCloud P2P On Uniview NVR’s

How To Set Up EZCloud P2P On Uniview NVR’s


First step in setting up your Uniview NVR to utilize the P2P function is to register/create an account. This can be done either directly on your phone via the EZView application or on the EZCloud website (




Once registered you can now add your NVR(s) to your P2P account. First step in doing so, is to enable the
EZCloud option within your NVR. To enable this go to Menu->System->Network->EZCloud and put a check mark within the Enable EZCloud option. Once enabled you will have two options in adding your NVR to your P2P account. You can either manually input the NVR’s “Register Code” on the app or EZcloud website or you can use the more common method of scanning the “QR Code” using the EZView app(Reference image below).




Once your device is added using either the QR Code or the Register code, you can now review your NVR and its cameras via the EZView application or EZStation PC software


Sharing Your P2P Device


Each Uniview NVR is limited to only be registered one single EZcloud account at one time. Due to this limitation, sharing the device is needed to be accomplished to allow other wanted registered users to access your NVR. To do so login to your EZCloud account via the web and select the “Share” option under the My Cloud Devices section.




Once you select share it will prompt you to a new page where you will need to fill in the below three pictured fields. Once all fields are filled in select Confirm.




View some of our Great Products Click here to visit our store now.