Uniview Password Generation

Forgot your password for your Uniview NVR or camera? In this guide we will be covering what information is needed to generate a master password and where to get that information.
 
Serial Number
 
The first thing that you will need to generate a master password is the serial number of the device. Serial numbers for uniview products can be found in three locations.
 
1.) On the devices Indentification label.
 
A.) For an NVR this would generally be on the bottom of the unit
 
 
uniview-serial-number-for-password
 
 
B.) On cameras it’s generally on the underside or base of the camera
 
 
serial-number-on-uniview-ip-cameras
 
 

2.) The box will also have a lable with the serial number.
Note: The serial number from the box may not match the unit.
 
 

serial-numbers-on-ip-cameras-and-recorders
 
 

3.)The EZTools software will show all Uniview devices on the local network and will also show their serial numbers when configured.
 
A.) Open EZTools and click the Settings Icon in the top right corner to bring up
the Setting window
 
 
eztoolz-show-serial-numbers-in-uniview
 
 
B.) Within the Setting window select the “Serial Number” check box, and then click “OK”.
 
 

filter-by-serial-numberas-in-eztoolz
 
 
C.) EZTools will now display the serial number for all Uniview devices on the local network.

 
 

display-serial-numbers-in-eztoolz-uniview
 
 

System Date
 
Now that we have the serial number, the next step is to find the date that the unit is configured with.
1.) For a NVR the date will be displayed on a monitor attached directly to the NVR in
the bottom right corner.
 
 

get-date-and-time-from-uniview-nvrs
 
 

2.) On a camera you will need to pull up the camera in a browser(Firefox or IE) A.) Once you are on the login screen click “Forgot Password ?”

 
 
forgot-password-in-uniview-nvrs
 
 
B.) This will show the Forgot Password window and will display the date the camera is set to.
 
 

display-date-and-time-in-uniview-nvrs

 
 
2.) On a camera you will need to pull up the camera in a browser(Firefox or IE) A.) Once you are on the login screen click “Forgot Password ?”
 
B.) This will show the Forgot Password window and will display the date the camera is set to.

 
 
Generate Password
 
Now that you have the serial number and date you will need to either call in or email Worldeyecam Tech Support to have to have the master password generated.
 
Change the Password
 
Once your master password has been generated use this password to log into the device and change the current password. You will use the generated master password as if it was your current password.
Note: the master password will work as the password for any account.
 
 


View some of our Great Products Click here to visit our store now.