24551 Raymond Way, Suite 270, Lake Forest, CALIFORNIA, 92630, United States
firstname.lastname@example.org 949-305-6550 888-211-2288 949-305-9977
Step 1: Unpack
Take out all of the components from the boxes. These should be your Cameras, DVR, Power supply, BNC cables, and DC cords
Next, using a Phillips head screwdriver connect the ends of each DC cord to the circuit board of the power supply.
Lastly, after all of the DC cords are connected to the circuit board pull the ends out through the back hole of the power supply box (Figure 2-5) and plug in your Power supply to a wall outlet (Figure 2-6).
Step 2: Connecting your cameras to DVR and power supply
To connect your cameras to the DVR and Power supply you will need to use BNC cables (Figure 3-1).
Connect your camera to the BNC cable (Figure 3-2 & Figure 3-3)
Next, connect the opposite end of the BNC cable to the back of the DVR Video In (Figure 3-4).
Lastly, connect the BNC cable to the Power supply DC cord. (Figure 3-5).
Step 3: Connecting your router to the DVR
Connect your network cable from your router (Figure 4-1) to the back of the DVR (Figure 4-2).
Step 4(Optional): Connecting a PTZ camera to the DVR
Use a very small Phillips Head screw driver to attach the red (POSITIVE) cable to the "A" box and the black (NEGATIVE) cable to the "B" box.
This completes the physical setup process!