How to setup Sapido Pocket N+ With Your Wireless Network
How to setup Sapido Pocket N+ With Your Wireless Network
Support Home
To connect your Sapido Pocket N+ adaptor to your existing wireless network can
be done in a couple quick steps.
STEP 1
On the
back of the device, move the small switch on the bottom left from the R to the
W position.
ONCE THE DEVICE IS IN THE "W" POSITION DO NOT TOGGLE THE SWITCH AGAIN OR ALL SETTINGS WILL BE LOST!
STEP 2
Plug
the Power N+ into the wall with the included power cable.
STEP 3
Connect the Pocket N+ into your computer via its Ethernet port. You will need to
temporarily disconnect your computer from your internet/router for this step as
the adaptor needs a direct connection to your computer.
STEP 4
Open
a browser on your computer and enter the following IP: 192.168.1.254
You should see the following screen:
STEP 5
Login with the default username: admin and password: admin
STEP 6
On
the next screen, click on One Button Setup in the left navigation pane.
STEP 7
This
screen will allow you to select the local Wireless (WiFi) network you want to
connect the Power N+ to under Wireless Site Survey Setting.
STEP 8
Select the network you want to connect to and scroll down to Encryption
STEP 9
Select the encryption the network has, and in the fields below enter the passkey
or password information needed to connect to the secured network.
STEP 10
You can now reconnect your PC to the internet and your Power N+ is ready to be a
wireless access point.