Getting Stand Alone Online

	1) Install the Video Server E software from the Installation CD. Then, run Video Server E
	2) Hit Search button
	3) Start --> Run --> type in cmd --> type in ipconfig in Command Prompt Copy down the Subnet Mask and Default Gateway for later use.
	4) Highlight the IP address on the device list and then change the server IP to the one under the same subnet mask. Also, fill up the information that you write down from Command Prompt before. Web port should be port 80 Hit APPLY (default username: admin, default password, admin), then OK.
	5) Type in the login password (default username & password are both admin), then hit the connect button.
	6) Login to the router and do the port forwarding for the DVR. In this example, you need to open up port 80 for 192.168.1.35 (DVR's IP address).