How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.

Easy remote Viewing

P2P/QR Code Easy Setup

To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.

 
 
You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 
 
 
Make sure that your DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.
 
 
 
Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.
 
 
How to setup the iPhone app with the P2P/QR Code
 
 
Step 1: Open the iMaxCam app and tap on Camera.
 
 
 
 
Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.
 
 
 
 
Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information
 
 
 
Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.
 
 
 
Step 5: In the add device screen, select P2P
 
 
 
 
Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

 
 
 
Step 7: Press the “Start Live Preview” button to start watching the cameras.