Access Controllers

This door frame card reader uses a transmit frequency of 125 kHz. It can read cards from 1-3 inches away. The reader uses an 8-bit microprocessor and a 26-40 bit Wiegand interface.

The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing access control cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

The GV-PCR310 is a USB card reader designed to assist with card enrollment to GV-ASManager. It reads and transfers the identification data of a detected card to GV-ASManager. The user can conveniently establish user accounts on GV-ASManager by inserting the cards in the GV-PCR310 Enrollment Reader.

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

GV-ASKeypad is an optional device for an administrator to control and manage GV-AS400. An administrator can carry GV-ASKeypad around to access GV-AS400 installed at different locations.

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

GV‐DES1352 is a dual‐band frequency RFID reader. Its dual‐band capability offers great flexibility for integrators to solve card management problems with both 125 kHz EM and 13.56 MHz Mifare used on the same premises. Featuring Wiegand and RS‐485 interfaces, it can be easily incorporated in any standard access control systems.

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

• Model Number: GV-AS100
• Manufacturer Part Number: 84-AS102-100
• 1,000 / 40,000 cards (standalone / networked mode)
• Easy programming from keypad
• Anti-Passback (APB) support
• Built-in 3 digital inputs and 2 relay outputs
• One Weigand output (26 ~ 64 bits) for extra reader programming

GV-RKV1355 is a vandal-resistant keypad reader capable of reading PIN codes and access cards. To successfully resist vandalism, the reader’s case is made of zinc alloy, making it suited for high-security locations such as banks and prisons. Featured with Wiegand and RS-485 interfaces, GV-RKV1355 can be integrated into any standard access control system. Furthermore, the reader complies with IP66 ingress protection, making it perfect for both indoor and outdoor applications.

The GV-AS210 controller supports 8 GeoVision readers through RS-485 connections. It can support up to 40,000 cards. The controller can handle up to 4 doors with compatible functions.

GV-AS1110 is a single door controller with a built-in reader. The TCP/IP network port on GV-AS1110 allows it to add two more network card readers for entry and exit applications. GV-AS1110 has the capability to store up to one thousand cards under standalone mode and up to 40,000 cards when connected to GV-ASManager. Programming of GV-AS1110 can be done either on the keypad or from the software GV-ASManager. GV-AS1110 is suitable for controlling doors, parking gates and access to elevator call buttons.

GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected to GV-EV48 using RS-485 connection and network connection. GV-EV48 can recognize identification cards and grant access to the authorized floors only.

GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected to GV-EV48 using RS-485 connection and network connection. GV-EV48 can recognize identification cards and grant access to the authorized floors only.

GV-AS1010 is suitable for controlling doors, parking gates and access to elevator call buttons.

Product Features

• 1 door (one-way and two-way control)
• 
  
• 1,000 / 40,000 cards (standalone / networked mode)
• 
  
• Easy programming from keypad
• 
  
• Function keys on keypad to register attendance data for GV-TAWeb
• 
  
• Built-in 3 digital inputs and 2 relay outputs
• 
  
• 1 RS-485 interface for connecting to up to 2 readers
• 
  
• 1 network interface for connection with GV-ASManager and TCP/IP read
• 
  
• Built-in 13.56 MHz Reader
• 
  
• Built-in tampering alarm sensor
• 
  
• Anti-Passback (APB) support

GV-AS4111 Kit is a cabinet containing a GV-AS4111, a power adapter board, a power supply and a casing for backup battery. The power supply provides power to GV-AS4111 and up to 8 output devices (12V, 0.5A per device).

GV-CR420 is a card reader with a built-in 4 MP wide angle IP camera. The card reader recognizes identification cards and grants access accordingly. The wide angle camera captures all angles of the entrance and transmits live view to GV-ASManager and GV-System through network connection.