GV-AS ID Card is ideal for business environment where identity and access control is important for security reasons. GV-AS ID Key Fob, designed for easy carrying and key replacement, is ideal for residential application. GV-UHF Tag is ideal for parking lot management. GV-AS ID Card, GV-AS Key Fob, and GV-UHF Tag are compatible with the following devices:

GV-SR1251 is a card reader designed to recognize access control cards. Featured with the Wiegand and RS-485 outputs, GV-SR1251 can be connected to any standard access control systems. GV-SR1251 comes with a weather sealed and IP66 compliant housing for outdoor use.

GV‐PCR1251 is a USB card reader, supporting 125 kHz, designed to assist with GV-AS ID Card / Key Fob enrollment to GV‐ASManager. It reads the identification number of a detected GV-AS ID Card / Key Fob and emulates typing of the ID number to GV‐ASManager, or any other software desired. The user can conveniently establish user accounts on GV‐ASManager by placing cards / key fobs of 125 kHz onto the GV‐PCR1251 Enrollment Reader.

The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing access control cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

The GV-PCR310 is a USB card reader designed to assist with card enrollment to GV-ASManager. It reads and transfers the identification data of a detected card to GV-ASManager. The user can conveniently establish user accounts on GV-ASManager by inserting the cards in the GV-PCR310 Enrollment Reader.

GV‐PCR1352 is a USB card reader, supporting 13.56 MHz, designed to assist with GV-AS ID Card / Key Fob enrollment to GV‐ASManager. It reads the identification number of a detected GV-AS ID Card / Key Fob and emulates typing of the ID number to GV-ASManager, or any other software desired. The user can conveniently establish user accounts on GV‐ASManager by placing cards / key fobs of 13.56 MHz onto the GV‐PCR1352 Enrollment Reader.

GV-R1352

Card Reader

The GV-R1352 is a card reader designed to recognize identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-R1352 comes with a weather-sealed and IP66 compliant housing for outdoor use.

Key Features

• Weather-proof and IP66-compliant housing (for outdoor use)
• Wiegand interface supported
• RS-485 output: 9,600 bps, connect up to 8 GV-R1352 units
• 13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
• Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security
• UL 294 compliance

Note:

• RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
• UL 294 Attack Class Level 1 depends on other connected equipment.
• If you are using third-party cards or key fobs, the reader must be under UID mode.
• Specifications are subject to change without notice.

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.

GV-RKV1355 is a vandal-resistant keypad reader capable of reading PIN codes and access cards. To successfully resist vandalism, the reader’s case is made of zinc alloy, making it suited for high-security locations such as banks and prisons. Featured with Wiegand and RS-485 interfaces, GV-RKV1355 can be integrated into any standard access control system. Furthermore, the reader complies with IP66 ingress protection, making it perfect for both indoor and outdoor applications.

• One-way control: 4 doors
• Two-way control: 2 doors by Wiegand only, 4 doors by Wiegand, RS-485 and network
• 4 Wiegand card readers of 26 to 64 bits
• 8 GV-Readers and GV-GF Fingerprint Readers through RS-485 and network
• Built-in 8 digital inputs and 8 relay outputs
• Suitable for controlling doors, parking gates and access to elevator call buttons
• Support for tampering alarm
• DC 12V, 3A / PoE+ (IEEE 802.3at, provides up to 25.5 W)

GV-CS1320

2MP H.264 Camera Access Controller with a built-in Reader

GV‐CS1320 is an access controller with a built‐in 2 MP camera and 13.56 MHz reader.
 
GV‐CS1320 recognizes identification cards and grants access to up to 100,000 users accordingly. With the integration of the wide-angle camera, the Card and Face Mode enables GV‐CS1320 to perform face detection together with card verification before access can be granted.
Visitors requesting entry permits can use the touchpad to be granted access. There are 3 types of notifications the operators can receive to grant access.
 
GV‐ASNotify Program:
When GV‐CS1320 is connected to GV‐ASManager over the network, GV‐ASNotify generates a notification message and snapshot whenever the touchpad is activated. The operator can use GV‐ASNotify to watch live view and communicate with the surveillance site via the microphone and speaker functions.
 
GV‐Access Mobile App:  
Similarly, the operator can launch mobile app GV‐Access to enable live view and voice communication with visitors at the door before permitting entry. After adding GV‐ASManager to GV‐Access, the operator will get an alert notification upon the trigger of the touchpad.
 
VoIP Calls:  
When the touchpad is activated, GV‐CS1320 will place a call to the operator through the Internet using VoIP. The operator can then communicate with the visitor and enter the access code to open the door.
The all‐in‐one solution eliminates the need for installing and maintaining a separate camera in addition to the card reader and a door entry system.

GV-CR1320

2MP H.264 IP Camera Reader

GV-CR1320 is a 13.56 MHz reader with a built-in 2 MP camera designed for access control in a network environment.
 
GV-CR1320 receives identification cards to be transmitted to controllers for access control. With the integration of the wide-angle camera, the Card and Face Mode enables GV-CR1320 to perform face detection together with card verification before access can be granted.
 
Visitors requesting entry permits can use the touchpad to communicate with security personnel, via VoIP Calls, to be granted access.

VoIP Calls
When the touchpad is activated, GV-CR1320 will place a call to the operator through the Internet using VoIP. The operator can then communicate with the visitor and enter the access code to open the door.
 
The all-in-one solution eliminates the need for installing and maintaining a separate camera in addition to the card reader.

For face detection by GV-CR1320, the cardholders must present their faces to the built-in camera directly, without being covered.

GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected to GV-EV48 using RS-485 connection and network connection. GV-EV48 can recognize identification cards and grant access to the authorized floors only.

The face recognition reader can work with GV-AS Controller and GV-ASManager for an intuitive, smart access control solution. When integrated with GeoVision controller and software, GV-FR2020 can operate under Face Recognition mode, as well as other modes including Card, Card + Face Recognition and Password + Face Recognition.

Ajax KeyPad TouchScreen Jeweller black
Wireless keypad with touch screen to control an Ajax system
Supports authentication with smartphones, pass, tag, and codes 

GV-RU9003 UHF RFID

UHF RFID Reader

GV-RU9003 is a Radio Frequency Identification (RFID) reader of the ISO 18000-6C (EPC GEN2) standard. Designed for parking lot management, the reader can read RFID tag up to 10 m (33 ft) under optimal conditions.

GV-AS4111 Kit is a cabinet containing a GV-AS4111, a power adapter board, a power supply and a casing for backup battery. The power supply provides power to GV-AS4111 and up to 8 output devices (12V, 0.5A per device).

GV-AS1520

Controller with Built-in UHF RFID Reader

GV-AS1520 is a controller with a built-in Radio Frequency Identification (RFID) reader of ISO18000-6C (EPC GEN2) standard. Designed for parking lot management, GV-AS1520 can read RFID tag up to 10 m (33 ft) under optimal conditions.

Key Features

• Built-in UHF Reader
• Built‐in 1 digital input and 4 relay outputs
• 1 RS-485 interface supporting up to 2 readers
• 1 network interface for connection with GV-ASManager and TCP/IP reader
• 12V DC / PoE+ (IEEE 802.3at, provides up to 25.5 W)
• 12V DC power supply to external devices when in the PoE power mode
• Effective range of up to 10 m (33 ft) under optimal conditions
• 100,000 cards supported
• Electronic tag compliant with EPC Gen II (ISO18000-6C) standard

Note: 

• GV-AS1520 is a controller with a built-in UHF RFID reader and therefore it cannot be used as an independent reader.
• The reading range of 10 m (33 ft) is achieved when GV-AS1520 and the RFID tag are installed at the same height, directly facing each other.
• Specifications are subject to change without notice.