SUPPORT HELP Loading...

Mini 2 Megapixel IR Audio PTZ 4X Optical Zoom IP Camera


$348.00


Availability: In Stock
Ships Same Day
List Price: $829.00
SKU: WEC-IPPTZ22
Product #: 85986
Manufacturer:
Camera Resolution: 1080P

Remote Login Support:
Quantity

The WEC-IPPTZ22 mini-PTZ indoor camera comes with a 2.7~11mm lens. Being a mini-PTZ, this camera has 16x digital zoom capability and pan / tilt functionality. This allows the user to shift the focus of the lens and also aim the camera to different locations as desired.

 

This camera comes with day/night capabilities with IR up to appro 98ft. Low lux and DWDR technologies provide clear, black-and-white images out of otherwise dark settings. 3DNR - digital noise reduction - helps cut down on image fuzz. This camera does not have any IP/IK protection and is intended for indoor usage.

 

Product Features

 

  • 2MP CMOS
  • 2.7~11mm Lens
  • 30fps @ 1080p
  • 4x Optical Zoom, 16x Digital
  • Pan: 0° ~ 355°; Tilt: 0° ~ 90°, auto flip 180°
  • 300 Presets
  • 5 Pattern, 8 Tour, Auto Pan/Scan
  • 30fps @ 1080p
  • Progressive scanning
  • Low Lux & WDR technology
  • Day/Night capabilities
  • IR up to 100ft
  • 2/3DNR, BLC, HLC
  • H.264 & MJPEG dual-stream encoding
  • Power over Ethernet
  • ONVIF compatibility
  • Privacy masking up to 4 areas
  • Built-in microphone
  • Max 20 users
  • Micro SD, Max 64GB
  • Max 13W (IR on)
  • 132.7mm x 116.5mm

 

SPECIFICATIONS

Model WEC-IPPTZ22 SD29204S-GN-W
Mini PTZ IP Camera
Image Sensor 1/2.8” CMOS
Effective Pixels 1920(H) x 1080(V), 2 Megapixels
Scanning System Progressive
Electronic Shutter Speed 1/1 ~ 1/30,000s
Min. Illumination Color: 0.05Lux@F1.6; B/W: 0.005Lux@F1.6
S/N Ratio More than 50dB
Camera Features
Day / Night Auto(ICR) / Color / B/W
Backlight Compensation BLC / HLC / DWDR (Digital WDR)
White Balance Auto, ATW, Indoor, Outdoor, Manual
Gain Control Auto / Manual
Noise Reduction Ultra DNR (2D/3D)
Privacy Masking Up to 24 areas
Digital Zoom 16x
Lens
Focal Length 2.7mm~11mm (4x Optical zoom)
Max Aperture F1.6~ F2.8
Focus Control Auto / Manual
Angle of View H: 112.5° ~ 39°
PTZ
Pan / Tilt Range Pan: 0° ~ 360° limited; Tilt: 0° ~ 90°, auto flip 180°
Manual Control Speed Pan: 0.1° ~100° /s; Tilt: 0.1° ~60° /s
Preset Speed Pan: 100° /s; Tilt: 60° /s
Preset 300
PTZ Mode 5 Pattern, 8 Tour, Auto Pan, Auto Scan
Speed Setup Human-oriented focal length/ speed adaptation
Power up Action Auto restore to previous PTZ and lens status after power failure
Idle Motion Activate Preset/ Pan/ Scan/ Tour/ Pattern if there is no command in the specified period
IR Distance 30m 98ft
Video
Compression H.264 / MJPEG
Resolution 1080P (1920×1080) / 720P (1280×720) / D1 (704×576 / 704×480) / CIF (352×288 / 352×240)
Frame Rate Main & Sub Stream Main: 1080P (1 ~ 25 / 30fps) / 720P (1 ~ 50 / 60fps) Sub: D1 / CIF (1 ~ 25 / 30fps)
Bit Rate H.264: 448K ~ 8192Kbps, MJPEG: 5120K ~ 10240Kbps
Audio
Compression G.711a / G.711Mu (32kbps) / PCM (128kbps)
Interface Built-in Mic
Network
Ethernet RJ-45 (10 / 100 Base-T)
WIFI N/A
Protocol IPv4/ IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, Bonjour, 802.1x
ONVIF ONVIF Profile S
Max. User Access 20 users
Smart Phone iPhone, iPad, Android, Windows Phone
Auxiliary Interface
Memory Slot Micro SD, Max 64GB
General
Power Supply DC12V, POE
Power Consumption 10W, 13W (IR on)
Working Environment -30ºC ~ 60ºC / Less than 90% RH
Dimensions Φ132.7 (mm) x 116.5 (mm)
Weight 0.95kg

Average Customer Rating:


1 Most useful customer reviews
Chris Moore
Mar 26, 2015
This customer purchased the item at our site.
This is the fourth time I am purchasing from WorldEyeCam and every single time they never disappoint with their super quick shipping service and professional customer support. Their products also never fail to impress as they are genuine and have the correct specs written. Not just that but their discounts are extremely generous and it guaranteed if you have your eye on a product but it is too expensive, keep a track on it and eventually a discount will settle on that very same product. That has happened to me twice up till now.

This security camera is just like all the others I have purchased. Perfect quality, amazing condition and of course I fell in love with it. Although it says “mini” in the title its specs are not compromised. I especially adore the 16 x digital zoom as it a very important aspect in every camera. The built in mic has proved to be extra useful at many times but that is a different story! This website has won my trust and I will continue to purchase all my cameras from here.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}