Controllers

The GV-IB25 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.

This door frame card reader uses a transmit frequency of 125 kHz. It can read cards from 1-3 inches away. The reader uses an 8-bit microprocessor and a 26-40 bit Wiegand interface.

The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing access control cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

The GV-PCR310 is a USB card reader designed to assist with card enrollment to GV-ASManager. It reads and transfers the identification data of a detected card to GV-ASManager. The user can conveniently establish user accounts on GV-ASManager by inserting the cards in the GV-PCR310 Enrollment Reader.

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

GV-Battery is an uninterruptible power supply (UPS) device, designed to continuously supply GV-AS200 Controller power during power failure.

GV-ASKeypad is an optional device for an administrator to control and manage GV-AS400. An administrator can carry GV-ASKeypad around to access GV-AS400 installed at different locations.

The GV-RK1352 is a card reader with keypad, designed to recognize PIN codes, identification cards or both. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-RK1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

GV-Wiegand Capture is a box device that can integrate your current Wiegand access control system into DVR systems manufactured by GeoVision. 

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.

GV-RKV1355 is a vandal-resistant keypad reader capable of reading PIN codes and access cards. To successfully resist vandalism, the reader’s case is made of zinc alloy, making it suited for high-security locations such as banks and prisons. Featured with Wiegand and RS-485 interfaces, GV-RKV1355 can be integrated into any standard access control system. Furthermore, the reader complies with IP66 ingress protection, making it perfect for both indoor and outdoor applications.

The GV-AS210 controller supports 8 GeoVision readers through RS-485 connections. It can support up to 40,000 cards. The controller can handle up to 4 doors with compatible functions.

GV-AS1110 is a single door controller with a built-in reader. The TCP/IP network port on GV-AS1110 allows it to add two more network card readers for entry and exit applications. GV-AS1110 has the capability to store up to one thousand cards under standalone mode and up to 40,000 cards when connected to GV-ASManager. Programming of GV-AS1110 can be done either on the keypad or from the software GV-ASManager. GV-AS1110 is suitable for controlling doors, parking gates and access to elevator call buttons.

GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV-Readers / GV-GF Fingerprint Readers can be connected to GV-EV48 using RS-485 connection and network connection. GV-EV48 can recognize identification cards and grant access to the authorized floors only.

GV-CS1320 is an access controller with a built-in 2 MP camera and 13.56 MHz reader. GV-CS1320 recognizes access control cards and grants access to up to 100,000 users accordingly. Its camera captures the live view of entrance and transmits it to the access control system GV-ASManager over a network, without the need of installing and maintaining a separate camera in addition to the camera access controller.

Three types of notifications are available for the operator to communicate with visitors at the door installed with GV-CS1320 and grant access: SIP/VoIP Calling, GV-ASNotify PC program and GV-Access mobile app.

For VoIP Calls, when its touchpad is activated, GV-CS1320 will place a call to the operator through VoIP. The operator can then communicate with the visitor and enter an access code to open the door. Additionally, GV-CS1320 supports the Card and Face mode to perform face detection together with card verification before access can be granted.

GV-AS1010 is suitable for controlling doors, parking gates and access to elevator call buttons.

Product Features

• 1 door (one-way and two-way control)
• 
  
• 1,000 / 40,000 cards (standalone / networked mode)
• 
  
• Easy programming from keypad
• 
  
• Function keys on keypad to register attendance data for GV-TAWeb
• 
  
• Built-in 3 digital inputs and 2 relay outputs
• 
  
• 1 RS-485 interface for connecting to up to 2 readers
• 
  
• 1 network interface for connection with GV-ASManager and TCP/IP read
• 
  
• Built-in 13.56 MHz Reader
• 
  
• Built-in tampering alarm sensor
• 
  
• Anti-Passback (APB) support

This access controller can be used for two doors. It supports up to 10,000 cards and 65,536 event buffers. Network communication is achieved with RS485 or TCP/IP.

This is the ethernet version of the GeoVision access controller. Like other controllers, it works on two doors and supports 10,000 cards. There is an LED light to indicate the readers state. 

GV-AS4111 Kit is a cabinet containing a GV-AS4111, a power adapter board, a power supply and a casing for backup battery. The power supply provides power to GV-AS4111 and up to 8 output devices (12V, 0.5A per device).