4K -12MP Ultra HD Vandal-proof IR Network Fisheye Camera WEC-EBW81200


$1,199.00


Availability: In Stock
List Price: $1,249.99
SKU: WEC-EBW81200
Product #: 86120
Manufacturer: iMaxCamPro
Camera Resolution: 4K = 4000 x 3000 pixels

Remote Login Support:
Quantity

This 4K fisheye security camera is the ideal choice for high quality, discreet surveillance. It records 12MP resolution footage at 15 frames per second and has infrared LEDs so it can keep on filming even at night. The sleek design of the fisheye camera means that is discreet enough to go on noticed by most people. This surveillance camera also comes with a built-in mic, digital noise reduction and multiple correct mode. The casing is IP67 and IK10 rated for safe outdoor use. Product Features are 1/2.3” 12M progressive scan CMOS, H.264 & MJPEG dual-stream encoding. Max 15fps@12M(4000x3000), 25/30fps@3M(2048x1536), Multiple Correct Mode Original ,Panoramic, Double Panoramic,1+3,Eptz,4 pictures. DWDR, Day/Night(ICR), 3DNR,ROI, AWB, AGC, BLC. Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS. Max.IR LEDs Length 10m, 1/1 Audio in/out(Built in Mic), Micro SD memery,IP67,IK10,PoE.IP cameras and video servers have built in web servers so that the surveillance video that they transmit can be viewed directly from the camera over the Internet using a web browser, such as Internet Explorer.

 

Product Features

  • 1/2.3” 12M progressive scan CMOS
  • H.264 & MJPEG dual-stream encoding
  • Max 15fps@12M(4000x3000), 25/30fps@3M(2048x1536)
  • Multiple Correct Mode:Original ,Panoramic, Double Panoramic,1+3,Eptz,4 pictures
  • DWDR, Day/Night(ICR), 3DNR,ROI, AWB, AGC, BLC
  • Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS
  • Max.IR LEDs Length 10m
  • 1/1 Audio in/out(Built in Mic)
  • Micro SD memery,IP67,IK10,PoE

Unboxing Video

Fisheye Web Interface View

(CLICK HERE) To view full 1080P image

 

 

SPECIFICATIONS

Model WEC-EBW81200
Image Sensor 1/2.3” 12MP Progressive Scan Sony Exmor IMX172 CMOS Image Sensor
Effective Pixels 4000(H)x 3000(V)
Scanning System Progressive
Electronic Shutter Speed Auto/Manual 1/3~1/10000
Min. Illumination 0.01Lux/F2.2(Color), 0Lux/F2.2(IR on)
S/N Ratio More than 50dB
Video Output N/A
Camera Features  
Max. IR LEDs Length 10m
Day/Night Auto(ICR) / Color / B/W
Backlight Compensation BLC/ HLC/DWDR
White Balance Auto/Manual
Gain Control Auto/Manual
Noise Reduction 3D
Privacy Masking Up to 4 areas
Lens  
Focal Length 1.57mm
Max Aperture F2.2
Focus Control Manual
Angle of View 185°/185°/185°
Lens Type Manual
Mount Type Board-in Type
Video  
Compression H.264H/MJPEG/JPEG
Resolution 12M (4000×3000) / 8M (2880×2880) / 6M (2880×2160) /3M (2048×1536)
Frame Rate - Main Stream 12M(1~15fps)/3M (1 ~ 25/30fps)
Frame Rate - Sub Stream D1/CIF(1 ~ 25/30fps)
Bit Rate 40Kbps~8192Kbps
Correct Mode Original ,Panoramic, Double Panoramic,1+3,Eptz,4 pictures
Audio  
Compression G.711a/G.711u/PCM
Interface 1/1 channel In/Out(Built in Mic)
Network  
Ethernet RJ-45 (10/100Base-T)
Wi-Fi N/A
Protocol HTTP, TCP, ARP, RTSP, RTP, UDP, RTCP, SMTP, FTP, DHCP, DNS, DDNS, PPPOE, IPv4/v6, SNMP, QoS, UPnP, NTP
Compatibility ONVIF, PSIA, CGI
Max. User Access 20 users
Smart Phone iPhone, iPad, Android, Windows Phone
Auxiliary Interface  
Memory Slot Micro SD
RS485 N/A
Alarm 2/1 channel In/Out
PIR Sensor Range N/A
General  
Power Supply DC12V, PoE (802.3af)
Power Consumption 13W
Working Environment -30°C~+60°C, Less than 95%RH
Ingress Protection IP67
Vandal Resistance IK10
Dimensions Φ150mm x 50.7mm
Weight 0.58kg(0.86kg with packaging )

Average Customer Rating:


3 Most useful customer reviews
Carlos Luna
Sep 21, 2016
FIsheye image is very high quality. Super detailed if you need something with higher quality.
Loading...Was the above review useful to you? Yes (0) / No (0)
Adams Voges
Sep 11, 2015
This customer purchased the item at our site.
Before buying this security camera I was hoping to find some information and opinions in the customer review section but not much luck. Meh! Anyhow here is a detailed review for all you guys who want to buy this camera. First off, it is a superb camera. The visual display is everything. You only know what quality is after watching the footage from your laptop/pc/phone/TV. The built in mic and micro SD memory card slot has come in handy many times for me and I am sure it shall come handy for you all too.

If you live in a normally dark area or wish to keep a tab on the activity around you at night, this camera is perfect for this purpose. With its high 12 MP resolution the upkeep of quality is not a big deal and you can visibly see everyone within reach. It is also a very sturdy type of security camera meaning you can use it outdoors and not fear for its safety all the time.
Loading...Was the above review useful to you? Yes (0) / No (0)
Ruben Marchan
Aug 28, 2015
This customer purchased the item at our site.
Excellent Camera!
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs


QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.


Easy remote Viewing
P2P/QR Code Easy Setup


To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.


You must check the box to enable P2P function and then click Apply to save at bottom of screen.
 

 

Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.

 

Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.

 

 

How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.
*}