2 Megapixel HD Vandal-Proof Mini 4X Optical Zoom PTZ Camera, 12V/PoE, IP66


Availability: In Stock
Ships Same Day
List Price: $449.00
Product #: 86060

Remote Login Support:

2MP with Ambarella S2 DSP and Aptina AR0230 Image Sensor, 1080p@30FPS, 2inch (dome cover size) PTZ with 4 x Optical Zoom (16x Digital Zoom)


  • 1/2.7" 2MP Aptina AR0230 CMOS Image Sensor
  • Ambarella S2 Digital Signal Processor
  • 4x Optical Zoom (16x Digital Zoom)
  • Re-designed IR LED pattern to eliminate glare
  • Max. 25/30fps@1080P(1920x1080) & 50/60fps@720P resolution
  • H.264 & MJPEG Triple Stream Encoding
  • WDR, Day/Night(ICR), Ultra DNR, Auto iris, Auto focus
  • 300 Preset, 8 Tour, and 5 Pattern Capacity
  • 100°/s Pan Speed
  • Support intelligent 3D positioning with DH-SD protocol
  • ONVIF Profile S Compliant
  • Micro SD memory, POE, 12V
  • IP66 Ingress Protection Rating

Image Sensor 1/2.7" 2 Megapixel Aptina AR0230 CMOS Image Sensor
DSP Ambarella S2
Effective Pixels 1920 (H) x 1080 (V)
Scanning System Progressive
Electronic Shutter Speed 1/1~1/30000
Min. Illumination Color: 0.05Lux/F1.6, B/W: 0.005Lux/F1.6
S/N Ratio More than 50dB
Video Output N/A
Max IR LED Distance N/A
Camera Features
Day/Night Auto(ICR) / Color / B/W
Backlight Compensation BLC / HLC / WDR
White Balance Auto
Gain Control Auto
Noise Reduction Ultra DNR (2D/3D)
Privacy Masking Up to 24 areas
Digital Zoom 16x
Focal Length 2.7mm - 11mm (4x Optical Zoom)
Max Aperture F1.6 ~ F2.8
Focus Control Auto/Manual
Field of View Horizontal: 93.5° ~ 30.2°
Close Focus Distance 100mm - 1000mm
Pan/Tilt Range Pan: 0° ~ 355°; Tilt: 0° ~ 90°, auto flip 180°
Manual Control Speed Pan: 0.1° - 100°/s; Tilt: 0.1° - 60°/s
Preset Speed Pan: 100°/s; Tilt: 60°/s
Presets 300
PTZ Mode 5 Pattern, 8 Tour, Auto Pan, Auto Scan
Power Up Action Auto restore to previous PTZ and focal status after restoring power
Idle Action Activate Preset / Pan / Scan / Tour / Pattern after definable idle period
Compression H.264 / MJPEG
Image Resolution 1080P (1920×1080) / 720P (1280×720) / D1 (704×576 / 704×480) / CIF (352×288 / 352×240)
Frame Rate Main Stream 1080P (1 ~ 25/30fps) / 720P (1 ~ 50/60fps)
Frame Rate Sub Stream 1 D1/CIF (1 ~ 25/30fps)
Frame Rate Sub Stream 2 720P/D1/CIF (1 ~ 25/30fps)
Bit Rate H.264: 448Kbps ~ 8192Kbps, MJPEG: 5120Kbps ~ 20480Kbps
Compression N/A
Interface N/A
Network Interface RJ-45 (10/100M)
Wi-Fi N/A
Protocol IPv4, IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPoE, DDNS, FTP, IP Filter, QoS, Bonjour, 802.1x
ONVIF Compliance ONVIF Profile S
Max. User Access 20 users
Smart Phone iPhone, iPad, Android, Windows Phone
Auxiliary Interface
Local Storage Micro SD, Max 128GB
RS485 N/A
Alarm N/A
Power Supply DC12V, PoE
Power Consumption 10W
Working Environment -22°F ~ +140°F (-30°C ~ +60°C), < 90%RH
Protection Rating IP66 / IK10
Dimensions Φ4.80"(122mm) x 3.50" (89mm)
Weight 2.0 lbs

Average Customer Rating:

1 Most useful customer reviews
Shan Clark
Jun 21, 2015
This customer purchased the item at our site.
I am very picky at what I place in my home and have to make sure, everything that goes in there has to stay for a long time. The price is not a problem I just need to make sure that it is of high quality. And this camera is exactly what I needed. Not just that it has a micro SD slot of 128 GB woaah! Also I can obtain all the footage and pictures through my smartphone as well as take screenshots and send them to friends and family.

But probably my most favorite feature about this security camera is the legendary 16 x digital zoom. I like to toggle with the DH-SD protocol and enable 3D positioning while the footage is being taped. There is an endless supply of features about this camera and that is exactly what I love about it. Everyone should try it out and experience what it is like having such a functional and multipurpose security camera.
Loading...Was the above review useful to you? Yes (0) / No (0)

Mobile APPs

QR Code Scan P2P iPhone Android iOS instructions

How to enable remote viewing without Port-Forwarding

We offer our own WorldEyeCam mobile apps for iPhone, iPad, Android phones and tablets. Our mobile apps allow you to remotely view your DVR and cameras from anywhere on the world. In this guide we will show you how to setup P2P or QR Code Scanning setup. No Port-Forwarding Needed.

Easy remote Viewing
P2P/QR Code Easy Setup

To access the P2P or QR code screen, you must first power on your recorder. Right click and select Main Menu->Setup->Network->P2P and the P2P/QR code will display.

You must check the box to enable P2P function and then click Apply to save at bottom of screen.


Make sure that your NVR/DVR is connected to your modem/router with a CAT5/Ethernet cable. Once P2P has been enabled please go to TCP/IP section inside of the network screen. Enable “DHCP” inside of the Network settings and save. Once DHCP has been enabled you will need to reboot the system.


Upon rebooting navigate back to the P2P setting to the system and scan the code with your mobile iMaxCam app and from this point you should be able to see the cameras.



How to setup the iPhone app with the P2P/QR Code

Step 1: Open the iMaxCam app and tap on Camera.

Step 2: Tap the menu icon on the top left corner to access the menu as shown in the picture.

Step 3: Tap the DEVICE MANAGER option to enter your DVR/NVR login information

Step 4: Once in device manager tap the plus sign button (+), in the top right corner to advance to the next screen.

Step 5: In the add device screen, select P2P

Step 6: In this Screen you need to tap the QR code icon on the right where the S/N field is.

Once you tap on QR Code icon the camera of your phone will start, go ahead and scan the code.

Name: DVR

S/N: Tap on the icon to scan the QR Code

User Name: admin (default)

Password: admin (default)

Step 7: Press the “Start Live Preview” button to start watching the cameras.

Viewing the live camera feed from your Integrator Series Network Video Recorder, or NVR, through a mobile device is simple, and can be done in less than five minutes. If you have used our G4MX App you will find it’s very similar, but if you haven’t, that’s okay too. As in the tutorial for iMaxCam, In this short tutorial we’ll be showing you how to setup your live security camera feed on your mobile device via the peer-to-peer, or P2P method, using a QR Code Scanning setup. Think of it as allowing your camera server and your mobile device to meet up and communicate together in the cloud, just by using a bar code your device can read. No Port-Forwarding or IT specialists needed. On your NVR, rick click to login to the main menu. Then select “System”, then “Network”, then click the box marked “Enable DHCP”. This should allow all the forms to be automatic when you connect your device. If you would rather set your IP address manually, you can do that as well. Just leave the “Enable DHCP” box unchecked and you will be given an opportunity to set your IP address yourself. In the setting page you’ll see the QR code. Leave that up on your screen, because you will need to scan it with your mobile momentarily. On your mobile device, download the “EZView” App from your preferred app store. Once downloaded, go ahead and open “EZView”. Select the main menu icon in the top left hand corner. Then select “Devices”. This is where you can add new devices and manage existing ones. Now that you have your device page open, you will need to add a new device. To do this, select the “+“ in the top right corner. Select “Add By P2P” to change the registration mode. Be sure to name your device (any name that works for you), then tap on the QR code icon to scan the QR code displayed on your monitor. Once you’ve done this, all of the information for your NVR should appear on your mobile, with exception of your user name and password. Go ahead and enter your login details there if prompted. After Inputting the information above select “Start Live View” at the bottom of the page to complete the setup and begin viewing your camera’s live feed! If you have any other issues or need further assistance, don’t hesitate to contact us via phone, email, or live chat. We’re here to help you. Because at World Eye Cam, we’re not just about security cameras. We want you to feel secure.