CALL US: 1-888-211-2288 Questions? Call: 1-888-211-2288

US Robotics Remote Access Guide for GeoVision

Port Forwarding using a US Robotics router
for GeoVision
Back to Remote Access Guides | Support Home


To setup port forwarding on this router your computer needs to have a static ip address.

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!

192.168.123.
USR8004

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.123.254.



USR8004

You should see a box prompting you for your password. Enter your password now. By default your password is blank. Click the Log in button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above do not work for you.



USR8004

Click the Virtual Server link near the left of the page.



USR8004


We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GeoVision Webcam requires you to forward the following ports: 21,80,3389,4550,5550,6550. Go ahead and enter the settings shown above into the Virtual Server menu.



ID Service Ports Server IP Enable
1 - 192.168.123.


You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.



ID Service Ports Server IP Enable
2 - 192.168.123.


You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.



ID Service Ports Server IP Enable
3 - 192.168.123.


You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.



ID Service Ports Server IP Enable
4 - 192.168.123.


You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.



ID Service Ports Server IP Enable
5 - 192.168.123.


You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings now.



ID Service Ports Server IP Enable
6 - 192.168.123.


When you're finished, click Save near the bottom of the screen to save your changes.



And that's it! You're done!