SK-910R4Q CODEBUMP™ Code-Hopping with Shunt/Momentary Operation.
Controls home automation functions, garage doors, alarm panels, etc.,
from up to 500ft (150m).* Similar to SK-910RQ & SK-910R2Q except
with 4 outputs, independently programmable. Compatible with all ENFORCER
transmitters. Mode switch for easy programming. 4 LEDs, one per
channel, indicate RF reception, learn mode, transmitter cleared, output
The PT-1FW is a line protector for FireWire® signals. It is used in Plug and Play applications where constant plugging and unplugging of FireWire® equipment can result in permanent damage to sensitive equipment due to ESD (electrostatic discharge).
ComNet™ CWPOEIPS-15 is a low-cost power over Ethernet (PoE) midspan injection module that injects 48 VDC at 0.3 amperes to the unused pairs of any UTP or STP CAT-3, CAT-4, or CAT-5 network cable. Operating power and 10/100TX Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. Housed in a compact, rugged, light-weight package, and utilizing a completely self-contained 100 to 240 VAC input power supply, the CWPOEIPS is fully compliant with the requirements of IEEE 802.3af for Power Sourcing Equipment (PSE), and features auto-detection of powered devices (PDs). Transmission distances of up to 330 feet (100 meters) are supported, and this injector supplies operating power for all PDs drawing a maximum of 15.4 watts. The unit provides AC line and powered device over-voltage and short circuit protection. Ideally suited to fiber optic, wireless, or other networks where it may be difficult to furnish operating power to the PDs, the CWPOEIPS is a true plug-and-play product requiring no user configuration or other set-up. The unit is designed for deployment in benign/conditioned 0 to +45 degree C operating environments.
Our full range RF modulator converts any composite signal (i.e. CCTV camera, VCR, DVD, satellite receiver and other AV sources) to a TV channel (UHF, CATV, HRC, or IRV). When used in conjuction with a video combiner/splitter distribution unit, it distributes an AV source to every room in the house. The modulator operates on channels 14-69 in UHF mode, and channels 65-94 and 100-125 in CATV, IRC or HRC mode. Added features include a digital LED display and full channel memory which safeguards against power outages. Isolated left and right RCA inputs improve audio performance. It also features phase-lock loop for eliminating channel drift and surface technology PC boards.
Channel Vision’s 1-Input Modulator With Bracket is designed to distribute a modulated channel of an incoming video source such as security cameras, VCRs, DVDs or other video/audio appliances. To enhance the performance of the C-0301, the unit should be combined with Channel Vision products such as passive splitters, HS-6 and HS-8, or powered distribution systems, CVT-2/8WB. Combining various distribution options with the E1200 allows the combination of CATV or off-air signals to be sent with the output of the C-0301, creating a total RF distribution system of incoming services and inhouse created channels to every room with the system.
Universal mount fixed mini-modulator - channel 8, professional grade modulator with fixed reception on catv channel 2, 45 dbmv adjustable output for optimum carrier-to-noise performance, digital phase-locked loop (pll) design for precise frequency locking.
The 705xl is a twisted pair transmitter for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the 706xl receiver converts the twisted pair signals back into two composite video signals.