TRENDnet’s N300 Easy-N-Range Extender, model TEW-736RE, extends the coverage of your existing wireless n network. Setup is simple, with no drivers to install. Simply press the Wi-Fi Protected Setup (WPS) button on your router or access point, then on the TEW-736RE and you’re done—the 300Mbps Easy-N Range Extender is now extending your high performance wireless N network over a large area.
Tripp Lite's B120-000-SL DVI Single-Link Signal Extender increases the distance a DVI-D signal can be transmitted beyond the recommended 16 ft. (5 m.). It supports video resolutions up to 1920 x 1080 @ 60Hz, and a maximum distance of 150 ft. from the source. Use P561-Series DVI Single-Link cables in most applications. When extending a 1920 x 1080 video signal more than 75 ft., use cable made with 24Awg wiring. (Available from Tripp Lite as a custom order) Simply connect the longer cable between the source and the B120-000-SL, and the shorter cable (16 ft. or less) between the adapter and the monitor. Software or drivers are not required. Built-in Equalization control to adjust the video image. HDCP and DDC compatible. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Made of solid steel and able to support up to 900 lbs, the Peerless AEC0203-W 2-3' Adjustable Extension Column allows 2-3' (0.6-0.9 m) of height adjustment in 1" (25 mm) increments, adding flexibility and functionality to your projector or flat panel mount.
Comprehensive's CHE-2 HDMI extender is your low cost solution when an HDMI signal needs to be extended up to 60 Meters (Using Cat6 Cable). The CHE-2 has signal transfer rates of up to 4.95Gbps with a full 1080p video signal.
RP-600 PG2 extends the communication range between the PowerMaster®
residential alarm systems and other PowerG transmitters. It receives
alarm, status and control messages from the wireless devices and sends
these messages to the control panel.
RP-600 PG2 uses Visonic's ground-breaking PowerG technology which
combines several field-proven advanced technologies and the highly
reliable AES encryption method. The combination of these technologies
delivers an extended transmission range and battery life, and unmatched
advantages for professional installers, central monitoring stations and
The Muxlab 500402 HDMI Passive Extender Kit replaces up to 100 ft. of expensive HDMI cable with cost effective Cat5 cable.
The MuxLab HDMI Passive Extender Kit transmits HDMI and DVI-D signals
via Cat5e or Cat6 UTP cables without the need for an external power
supply. The HDMI kit includes a transmitter and receiver, both of which
have a male HDMI connector at one end and 2 RJ45S connectors at the
other end for a cable connection.
The ProView Wireless N Internet Camera transmits real-time high quality streaming video over the Internet. Manage your Internet Camera from any Internet connection. Wireless n technology provides unsurpassed wireless coverage and improved streaming video quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected Setup (WPS).
The ComNet™ CopperLine CLFE(X)COAX Ethernet over COAX line consists of
four models that support 100Mbps Ethernet as well as Pass-through Power
over Ethernet (PoE) over standard 75& coaxial cable. These models
support transmission distances of up to 5,000 feet (1524m) at 10 Mbps,
or 1800 feet (548m) at 100 Mbps. The CLFE1COAX, the CLFE4COAX, CLFE8COAX
and the CLFE16COAX transport, one, four, eight or sixteen channels
respectively. The IEEE 802.3-compliant extenders also meets the
requirements for IEEE 802.3af/at PoE power, passing through up to 30
watts of power per port to the powered device (PD). The CLFE(X)COAX
series may also be used interchangeably with other CopperLine
Ethernet-over-Coax extenders. LED indicators confirm operating status of
the device. Packaged in a rugged aluminum housing, these units are
designed for desktop or stand-alone mounting. The CLFE8COAX and
CLFE16COAX are offered in EIA 19” 1U high rack for easy installation.
Environmentally hardened to the requirements of NEMA TS-1/ TS-2 for most
out-of-plant applications, and true plug-and-play design ensures ease
of installation and operation.
Net2 TCP/IP Ethernet to RS485 converter. Connects Net2 dataline directly to a LAN/WAN. Remote site management.
The Net2 485 TCP/IP Ethernet interface allows communication between the
Net2 server PC and control units across a TCP/IP Ethernet network. Where
a PC network already exists this can be a very convenient solution. A
single Net2 system can comprise of up to 50 datalines each connecting to
the PC network using a 485 TCP/IP interface (v4.07 and above).
The ComNet™ CopperKit CKFE1UTP Ethernet over UTP line consists of two single channel units in a single package containing cables and power supplies. They support 100Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over twisted pair cable (Cat5, UTP) The CKFE1UTP supports transmission distances of up to 3,000 feet (914m) at 10 Mbps, or 2,100 feet (640m) at 100 Mbps. The IEEE 802.3-compliant Ethernet electrical interface of these Ethernet extenders also meets the requirements for IEEE 802.3af/at PoE power, passing-through up to 30 watts of power per port to the powered device (PD). LED indicators confirm operating status of the device. Packaged in a rugged aluminum housing, these units are designed for desktop or stand-alone mounting. Environmentally hardened to the requirements of NEMA TS-1/ TS-2 for most out-of-plant applications, and true plug-and-play design ensures ease of installation and operation.