CALL US: 1-888-211-2288 Questions? Call: 1-888-211-2288

BES Manufacturing

Products

  • CR966 Mini Cable Reel Holder

    Product #: 59181
    CR966 Mini Cable Reel Holder takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $93.66 $160.56
  • FIBT25 25' Fibersnake; 3/16" Rod (in pvc case)

    Product #: 57929
    These 3/16" Fibersnakes are a simple wire pulling tool for short wire runs. Designed with a reinforced fiberglass core and then coated with plastic to provide superior flexibility and long lasting durability. Each end has a zinc plated tip so they won't rust and you can pull from either direction. Comes housed in it own PVC case. Available in 10', 25', and 40' lengths.FIBT25 25' Fibersnake; 3/16" Rod (in pvc case) is a lightweight and portable solution for dispensing wire and cable.It takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. Handy wire reel holder is designed to pay out shrink-wrapped wire coils with no kinks tangles, knots, twisted wire or dragging.Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $131.09 $224.73
  • UC25 25-Feet Under-Carpet Wire Snake

    Product #: 59187
    UC25 25-Feet Under-Carpet Wire Snake tip inc Pole construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version Telepole is a telescoping rod that allows you to push or pull wires over long spans. Made of a non-conductive fiberglass for safety, the Telepole's sections are lockable at any length through the use of an innovative lever lock system.These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $143.17 $245.43
  • FIB108 3' Fish-Kit (18' of 3' rods / carrying case)

    Product #: 57879
    FIB108 3' fish-kit (18' of 3' rods / carrying case) is a lightweight and portable solution for dispensing wire and cable. Handy wire reel holder is designed to pay out shrink-wrapped wire coils with no kinks tangles, knots, twisted wire or dragging.Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels.CT1100 cable caddy hand truck takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $164.20 $281.49
  • FIB208 Fiberfish II Kit (24' of 3' rods / carrying case)

    Product #: 57882
    FIB208 Fiberfish II Kit (24' of 3' rods / carrying case) is a lightweight and portable solution for dispensing wire and cable. Handy wire reel holder is designed to pay out shrink-wrapped wire coils with no kinks tangles, knots, twisted wire or dragging.Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels.CT1100 cable caddy hand truck takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $164.20 $281.49
  • GLF408 5/32" Glow Fish II 3' Kit (24' total)

    Product #: 57891
    GLF408 5/32" Glow Fish II 3' Kit (24' total) construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version! These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $175.35 $300.60
  • GLF308 3/16" Glow Fish 3' Kit (24' total)

    Product #: 57888
    GLF308 3/16" Glow Fish 3' Kit (24' total) construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version! These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $186.48 $319.68
  • PCF207 Coated Fiberfish II Kit (30' total)

    Product #: 57897
    PCF207 Coated Fiberfish II Kit (30' total) construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version! These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $192.50 $330.00
  • GLF407 5/32" Glow Fish II 6' Kit (30' total)

    Product #: 57890
    GLF407 5/32" Glow Fish II 6' Kit (30' total) construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version! These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $193.90 $332.40
  • PCF308 3/16" Coated Glow Fish 3' Kit (24' Total)

    Product #: 57899
    PCF308 3/16" Coated Glow Fish 3' Kit (24' Total) construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version! These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $195.86 $335.76
  • FIBT40 40' Fibersnake; 3/16" Rod (in pvc case)

    Product #: 57885
    FIBT40 40' Fibersnake; 3/16" Rod (in pvc case)Rugged plastic coating over 3/16 fiberglass reinforced composite core.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $201.02 $344.61
  • CR1248 Cable Reel Holder

    Product #: 59180
    The Cable Reel Holder takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $206.12 $353.34
  • TPF614 Telepole 6-15 ft. Telescoping Fiberglass Pole

    Product #: 57901
    TPF614 Telepole 6-15 ft. Telescoping Fiberglass Pole construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version Telepole is a telescoping rod that allows you to push or pull wires over long spans. Made of a non-conductive fiberglass for safety, the Telepole's sections are lockable at any length through the use of an innovative lever lock system.These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $213.27 $365.61
  • BES11455 Rack-A-Tier Portable Wire Rack

    Product #: 58763
    The Rack-A-Tier from BES is the perfect addition to any work truck or work site. This unique 2 piece system can be used as a wire pulling station, a vice, a set of saw horses, a work bench, and much more. When not in use the racks nest together of easy storage. Constructed out of heavy duty plastic for long lasting use. Sold as a pair. Dimensions: 18" H x 16" L x 2" W, Base is 8" wide. It is a key attachment that allows you to secure a horizontal or vertical cable ladder from any direction with a few simple bolts. The MW-LA Cable Ladder Adapter is part of an award-winning series of rack options for Middle-Atlantic systems.This connector accommodates 6" and 12" wide cable ladders. It is built smarter than ever before, and greatly increases the wiring flow. Middle-Atlantic makes the best in rack solutions; their accessories add expert convenience. Quickly attach your cable ladder for instant satisfaction and clutter reduction. This kit accommodates 6 and 12"W ladders and allows them to be attached from any direction to create the wiring raceways you want.
    $240.42 $412.14
  • EZ-1000 EZ-Spool Cable Dispenser

    Product #: 59109
    EZ-1000 EZ-Spool is a lightweight and portable solution for dispensing wire and cable. Handy wire reel holder is designed to pay out shrink-wrapped wire coils with no kinks tangles, knots, twisted wire or dragging.Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels.CT1100 cable caddy hand truck takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $281.03 $481.77
  • LC1025 Variable Size Hole Cutter

    Product #: 59184
    LC1025 Variable Size Hole Cutter construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version! These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $282.63 $484.50
  • TPF620 6' -20' Telescoping Fiberglass Pole W/"Z" Tip Inc.

    Product #: 59185
    TPF620 6' -20' telescoping fiberglass pole w/"z" tip inc Pole construction and durability you've come to expect from the Fiberfish in a new Glow in the Dark version Telepole is a telescoping rod that allows you to push or pull wires over long spans. Made of a non-conductive fiberglass for safety, the Telepole's sections are lockable at any length through the use of an innovative lever lock system.These rods actually glow, unlike some competitors, whose rods need an outside light source to "glo". The clear carry case means the rods are always "charged" and ready to go.Available in 3/16" or super flexible 5/32" diameters.It can be used in conduit Included bullnose at each end so wires can be pulled from either direction.Bullnose is narrow to fit tight spaces and screws into 3/16 socket at the end of the FiberSnake. Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $285.85 $490.02
  • D21010 Laserline® Wire Dart Kit Line Caster

    Product #: 60000
    D21010 Laserline® Wire Dart Kit Line Caster accurately installs a pull line up to 120ft. through most web trusses, across suspended ceiling systems, over hard to move objects or under sub-flooring. Ideal for use in most offices, commercial building structures or in the home. Just establish the route, aim and pull the trigger.The Cable Truck has 4 axle positions and a solid steel plate for transporting material on the job site. Both feature sturdy 7" rubber wheels.CT1100 cable caddy hand truck takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $587.14 $1,006.53
  • CT1100 Cable Caddy Hand Truck

    Product #: 59183
    Constructed of rugged 1" steel tubing. The Cable Truck and the Cable Caddy are 43" tall and can accommodate spools up to 16" wide on solid steel 1/2" axles. The Cable Caddy features 6 axle positions for unlimited versatility. The Cable Truck has 4 axle positions and a solid steel plate for transporting material on the job site. Both feature sturdy 7" rubber wheels.CT1100 cable caddy hand truck takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $600.99 $1,030.26
  • FIBT100 100Feet 3/16'' ROD Fibersnake

    Product #: 61716
    FIBT100 100Feet 3/16'' ROD Fibersnake is a lightweight and portable solution for dispensing wire and cable. Handy wire reel holder is designed to pay out shrink-wrapped wire coils with no kinks tangles, knots, twisted wire or dragging.Cable Dispenser is equipped with heavy-duty polyurethane straps that automatically adapt to different coil diameters and keep wire coils properly adjusted. EZ-Spool's swivel base prevents accidental tipping.Both feature sturdy 7" rubber wheels.CT1100 cable caddy hand truck takes the hassle out of installing bulk cable. Pull cable conveniently and safely from a sturdy lightweight frame. Handles multiple spools on the 26" wide crossbar.. 14" clearance from floor to crossbar. When not in use, the Cable Reel Holder folds flat for easy storage.It is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. This model consists of two heavy-duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with a standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).
    $642.36 $1,101.18
  • CON300 Professional Tool Kit For Wire Fishing

    Product #: 59179
    CON300 Professional Tool Kit For Wire Fishing a work bench, and much more. When not in use the racks nest together of easy storage. Constructed out of heavy duty plastic for long lasting use. Sold as a pair. Dimensions: 18" H x 16" L x 2" W, Base is 8" wide. It is a key attachment that allows you to secure a horizontal or vertical cable ladder from any direction with a few simple bolts.It enables you to connect compatible Canon or Kodak cameras to your CineMoco controller. Also, if the cables included with the CineMoco are not compatible with your camera, and your camera's model is listed in the compatibility list below, this cable will enable you to connect your camera to your CineMoco. The MW-LA Cable Ladder Adapter is part of an award-winning series of rack options for Middle-Atlantic systems.This connector accommodates 6" and 12" wide cable ladders. It is built smarter than ever before, and greatly increases the wiring flow. Middle-Atlantic makes the best in rack solutions; their accessories add expert convenience. Quickly attach your cable ladder for instant satisfaction and clutter reduction. This kit accommodates 6 and 12"W ladders and allows them to be attached from any direction to create the wiring raceways you want.
    $1,169.77 $2,005.32
  • CD3100 Cable Dolly Jr Wire Cart

    Product #: 59177
    CD3100 Cable Dolly Jr Wire Cart a work bench, and much more. When not in use the racks nest together of easy storage. Constructed out of heavy duty plastic for long lasting use. Sold as a pair. Dimensions: 18" H x 16" L x 2" W, Base is 8" wide. It is a key attachment that allows you to secure a horizontal or vertical cable ladder from any direction with a few simple bolts.It enables you to connect compatible Canon or Kodak cameras to your CineMoco controller. Also, if the cables included with the CineMoco are not compatible with your camera, and your camera's model is listed in the compatibility list below, this cable will enable you to connect your camera to your CineMoco. The MW-LA Cable Ladder Adapter is part of an award-winning series of rack options for Middle-Atlantic systems.This connector accommodates 6" and 12" wide cable ladders. It is built smarter than ever before, and greatly increases the wiring flow. Middle-Atlantic makes the best in rack solutions; their accessories add expert convenience. Quickly attach your cable ladder for instant satisfaction and clutter reduction. This kit accommodates 6 and 12"W ladders and allows them to be attached from any direction to create the wiring raceways you want.
    $1,505.82 $2,581.41
  • CD3000 Cable Dolly Wire Cart

    Product #: 59176
    CD3000 Cable Dolly Wire Cart a work bench, and much more. When not in use the racks nest together of easy storage. Constructed out of heavy duty plastic for long lasting use. Sold as a pair. Dimensions: 18" H x 16" L x 2" W, Base is 8" wide. It is a key attachment that allows you to secure a horizontal or vertical cable ladder from any direction with a few simple bolts.It enables you to connect compatible Canon or Kodak cameras to your CineMoco controller. Also, if the cables included with the CineMoco are not compatible with your camera, and your camera's model is listed in the compatibility list below, this cable will enable you to connect your camera to your CineMoco. The MW-LA Cable Ladder Adapter is part of an award-winning series of rack options for Middle-Atlantic systems.This connector accommodates 6" and 12" wide cable ladders. It is built smarter than ever before, and greatly increases the wiring flow. Middle-Atlantic makes the best in rack solutions; their accessories add expert convenience. Quickly attach your cable ladder for instant satisfaction and clutter reduction. This kit accommodates 6 and 12"W ladders and allows them to be attached from any direction to create the wiring raceways you want.
    $1,749.93 $2,999.88