Our two-way in-wall compact speaker system features a 70 volt line transformer. The transformer has wattage taps of 2.5, 5, 10, and 20 watts. It has a 5 1/4 inch polypropylene woofer and a 1 inch mylar dome tweeter with automatic circuit breaker to protect tweeter from overload.
|Crossover Frequency||3,000 Hz|
|Dimensions||11"(H) X 7-1/2" (W)|
|Frequency Response||50-20,000 Hz|
|Hole Size Required||9-3/4" (H) X 6-1/4" (W)|
|Magnet Weight||10 oz.|
|Max Power||30 Watts|
|RMS Power||20 Watts|
|Sensitivity @ 1W/1M||90 dB|
|Tweeter Voice Coil Dimensions||Mylar Dome 1"|
|Woofer Voice Coil Dimensions||5-1/4" Polpropylene 1"|
|Dimensions||6-1/2"(Dia) x 11"(L)|
|Frequency Response||250-15,000 Hz|
|Housing||White ABS Plastic|
|Max Power||32 Watts|
|RMS Power||15 Watts|
|Sensitivity @ 4V/1M||120 dB|
|Transformer Taps||32, 16, 8, 4, 2 Watts|
The NC369 (NC-369) UHF Paging Transmitter receives alphanumeric messages and patient call information via serial interface and transmits the information directly to pagers. Information is sent to the transmitter at 9600 baud to minimize bottlenecks. Call type and location are determined by the system supplying information to the transmitter. Up to 1,000 pager IDs are supported. Battery backup is also available. Programming is simple using a PC or laptop and web based programming screens. Dipswitches are also available on the unit for minimal function onsite setup.
The system's range depends upon the site and the transmitter's location. To determine the exact coverage, conduct a site survey. Estimate a range of up to one mile under ideal conditions. The unit includes a 1/4-wave BNC-terminated antenna to provide coverage that meets most requirements. The optional CA133 (CA-133) Antenna is suited for installations that require good building penetration and range. On average, the CA133 Antenna adds about 25% to the transmission footprint, and because it comes with approximately 10 feet of cable, it can be mounted in more locations.