How to setup Sapido Pocket N+ With Your Wireless Network

How to setup Sapido Pocket N+ With Your Wireless Network
Support Home

To connect your Sapido Pocket N+ adaptor to your existing wireless network can be done in a couple quick steps.

STEP 1
On the back of the device, move the small switch on the bottom left from the �R� to the �W� position.

ONCE THE DEVICE IS IN THE "W" POSITION DO NOT TOGGLE THE SWITCH AGAIN OR ALL SETTINGS WILL BE LOST!

STEP 2
Plug the Power N+ into the wall with the included power cable.

STEP 3
Connect the Pocket N+ into your computer via its Ethernet port. You will need to temporarily disconnect your computer from your internet/router for this step as the adaptor needs a direct connection to your computer.

STEP 4
�Open a browser on your computer and enter the following IP: 192.168.1.254

You should see the following screen:

STEP 5
Login with the default username: admin and password: admin

STEP 6
�On the next screen, click on �One Button Setup� in the left navigation pane.

STEP 7
This screen will allow you to select the local Wireless (WiFi) network you want to connect the Power N+ to under �Wireless Site Survey Setting�.

STEP 8
Select the network you want to connect to and scroll down to �Encryption�

STEP 9
Select the encryption the network has, and in the fields below enter the passkey or password information needed to connect to the secured network.

��� STEP 10
You can now reconnect your PC to the internet and your Power N+ is ready to be a wireless access point.

�

�

�